Backlinks to L0Muon in LHCb Web

Results from LHCb web retrieved at 20:38 (GMT)

Trigger statistics for the PhiPi line, Stripping20. TCK 0x990042 (June 2012) lumi 0.318712 pb (just ran over one file from the SL stream) The tables...
BandWidth division This page is to collect information regarding the bandwidth division for 2015 data taking. TOC: Data Preparation Datasets L0...
Tracking and Alignment Plots for Conferences Tracking Muon tracking efficiency Plot Description Track reconstruction efficiency for 2012 and...
LHCb Core Software Meeting Date and Location 2015 06 24 10:30 11:00 CERN (2 R 030) Attendees Colas Pomies, Gloria Corti, Illya Shapoval, Joel Closier, Marco...
List of PC installed in D2 This table will inventory all PC installed in D2 barracks: RACK DETECTOR NAME PC TYPE SERIAL NUMBER MACADDRESS...
Hlt2 efficiencies and rates: Development Nightly build lhcb1 (v26r3 release candidates) on 12/5/09 with Miriam tuning. Hlt1 and 2 rates ... running ... Here are the...
Hlt2 rates running DV v24r1p1 on MB data For definitions of categories see Physics workshop talks. Version This is obtained with DaVinci v24r1p1 as available...
Task list, incomplete Task Assigned Next milestones Management responsible Calo reconstruction Albert Partially completed, full alignment...
Hlt2 efficiencies and rates Version This is obtained with DaVinci v23r2p1. This is to be used for the July 16 meeting. Hlt1 and 2 rates Hlt1 eff is 99.9973%. Assuming...
Scenario Moore Settings changes 14r6 pt16 v14r6 Physics June2012 none 14r6 pt14 v14r6 Physics June2012 AllL0 PT 1.6 1.4 GeV 14r...
Trigger Code For Developers Note: This is seriously obsolete How to define an HLT alley? The HLT alleys are defined via options, see for example HltHadConfAlleySequence...
How to modify the HLT TCK Introduction to TCKs and Manifests The Hlt configuration lives in $HLTTCKROOT/config.tar, which contains all configurations ever deployed...
Hlt Trigger Selection Naming Convention The following naming convention applies to strings used to identify Trigger Selections which may get saved in HltSummary. Since...
L0 Event Model The L0 Event Model is made of four components, as is the hardware. L0Calo : Inputs are extracted from the Raw Buffer, and are the 8 bit transverse...
L0 derandomizer buffers Optical links inside the PU data blocks https://twiki.cern.ch/twiki/pub/LHCb/L0MuonHowL0Buffers/l0buffer2OL.pdf l0buffer2OL.pdf frames...
Main.pyduval 27 Jul 2007 BER (or GOL) test is used in the same way as the CONNECTIVITY test except that you use GOL instead CONNECTIVITY in the test main panel before...
CCPC Names and MAC addresses For processor/controller boards, the names of the CCPC`s are tmutbQXX where Q 0 to 3 for Q1 to Q4 and XX 0 to 11 for...
Status of ccvser The status of the ccvser can be determined in two ways: Using the L0 Muon tools box Using did loggon on tmudaq01 type did...
Checklist Check that ccserv are running on all CCPC Set the processors in running state Check that all FPGAs are in processing mode (tmuPbFpgaStatus...
How to check the optical links contents using PDM events The aim of this test is to be sure that all logical channels are sent to the L0 Muon trigger. Ask the...
This topic will help you to access the JTAG Hub and change configuration to access all board connected to it. Log on JTAG hub web server using the following address...
Log on the tell1 (see here) Check the firmware version version tell1 if you nedd to load a new version (see here) Reset the tell1 reset tell1 ATTENTION...
How to check Optical links content using PDM events RenaudLeGac 07 May 2008
JeanPierreCachemiche 9 Oct 2007 Reminder: on the control room PC the TFC panels are accessible at G:\online\ecs\Shortcuts\TFC\TFC UI DEN as shortcuy Procedure First...
Main.pyduval 27 Jul 2007 Start PVSS administrator window Select the PVSS projects and start them. The list of projects depends on the emitter/receiver boards. For...
The L0MUON crates Q1 D3A03U Q2 D3A03L Q3 D3A01L Q4 D3A01U Tell1 A side D3A04U Tell1 C side D3A04L Using rackctrl the command...
Main.pyduval 27 Jul 2007 When logged on a control room station (LB015W) for us: Start Exceed on the station Use Putty to log on tmudaq01 on piyvduval...
Main.pyduval 27 Jul 2007 When logged on a control room station (LB015) for us: Start Exceed on the station Use Putty to log on tmudaq01 on piyvduval account...
This topic will guide you to load the PUs with the firmware dedicated to the diagnostic of optical link coming from the ODE boards. You can either log directly on...
RenaudLeGac 31 Oct 2007 The number of the latest firmware version can be obtained here To obtain the firmware version used by the hardware: logon...
RenaudLeGac 01 Nov 2007 Log on the main ECS server using the common user account Start a PuTTY terminal: Host Name: tmutbqxx for...
In the trigger supervision panel a tab opens a panel to manage the recipes. Recipes can be created or deleted or applied to a processor or to the whole trigger...
How to view QPPL and TTCrx state on a Controller Board Log on a Controller Board with the ` cc ` login; Go in the ` CONTR V3 ` directory by taping `...
ODE Name and Position in Front end Crate The ODE name is for example Q4M5R1 2 . The ODE boards are located in rack M1A01 , M1A02 , M2A01 and M2A...
ODE identifers for Optical links The ODE identifiers used for the connectivity test are described here. These identifiers might also be sent on the first collision...
The panel tmuOLStatus.pnl is used to see what kind of raw input data are received from ODE and if they are recognized (or not): red led no data recognized on...
How to read analyze the raw data on disk Hypothesis : The software assumes the following configuration : Bank type 10 TELL1 sourceID : srcID...
How to run the L0Muon online monitoring The L0Muon monitoring task which produces and publishes the histograms is L0MuonDAQMon . It is automatically launched when...
JeanPierreCachemiche 27 Sep 2007 Procedure For all the operations below, you must first log on the CERN gateway ( lbgw.cern.ch if you are outside from CERN or...
JeanPierreCachemiche 27 Sep 2007 For all the operations below, you must first log on the CERN gateway ( lbgw.cern.ch if you are outside from CERN or gw01.cern.ch...
To make a test with the L0Muon trigger in RUN mode and the TELL1 in RICH TRANSPARENT mode the following components have to be initialized in the following order....
JeanPierreCachemiche 27 Sep 2007 For all the operations below, you must first log on the CERN gateway ( lbgw.cern.ch if you are outside from CERN or gw01.cern.ch...
Two methods are available to access to the PVSS control panels of the L0DU.The first is the simplest and the preferred one. Both can be used from a computer...
RenaudLeGac 02 Nov 2007 When logged on a main ECS server, LB015W for us, using the common user account: Start Exceed Use Putty to log on tmudaq01 or tmudaq...
Allocated system names and numbers are: Muon and L0DU sys number sys name project machine 220 TMUON L0MUON TRIG...
This document explain how to time aligned the L0DU with respect to the L0 Muon processors Start the PVSS project of L0DU Activate L0DU in ODINIn ECS...
Machines and computing environment for the L0Muon Trigger The machines and directory available at the pit are the following. User The common user to work is piyvduval...
The ECS for the L0 trigger is associated to the PVSS project L0 TRIGGER . It is linked to the L0DU CU, TCALO DAQ and the TMU A and TMU C ECS control nodes. The...
support: lbonsupp #64;cernNOSPAMPLEASE.ch obsolete since 21 April 2008 (lhcb online admins #64;cernNOSPAMPLEASE.ch) Access to tickets management system (log...
How to start the event builder (OBSOLETE at point 8) Connect to the machine where to run the event building : CPPM : marmuon4 with login cc ( ssh cc@marmuon...
L0Muon lookup table gotchas This page tries to collate some of the wisdom about the L0Muon FOI lookup table and how to correctly emulate L0Muon. There is a lookup...
L0Muon Software L0Muon event model see L0Muon event model (top) L0Muon emulator The L0Muon emulator emulates the L0Muon trigger processing. It is based on 2 main...
L0TriggerTisTos tool WARNINGS: DaVinci v28r2p2 or earlier 2011 DiMuon trigger based on Pt1 Pt2 is not supported in L0SelReportsMaker. You need to `getpack Phys...
Bookkeeping of the Calorimeter Commissioning Data This page provides useful information about the data samples stored during the commissioning phase of the calorimeters...
Calorimeter Data Displays This page contains nice displays of calorimeter data. Cosmics event August 2008 : injection event LHC TI8 TED injection (run...
List of people working in the pit The Safety Coordinators require to have an up to date list of people currently carrying activities in Pit 8. The Group Leaders and...
L0 Trigger Organization Project Leader R. Le Gac L0 Calorimeters P. Robbe L0 Muon J. Cogan L0 Pile up M. Van Beuzekom L0DU R. Lef...
LHCb TCK pages This page contains the procedure to follow when an existing TCK (L0 HLT) needs to be modified: Uploading a new L0 TCK into the hardware via PVSS...
LHCb trigger twiki pages General information Meetings : We have our weekly trigger meeting on Friday afternoon at 15:00 in 2 R 30. See the indico listing....
Releases based on LHCb v24r1 (and Gaudi v20r1, LCG 55) This page documents releases based on LHCb v24r1. Do not edit , the content of these releases is frozen. LHCb...
Releases based on LHCb v25r0 (and Gaudi v20r2, LCG 55a) This page documents releases based on LHCb v25r0. Do not edit , the content of these releases is frozen....
Releases based on LHCb v25r1 (and Gaudi v20r2, LCG 55a) This page documents releases based on LHCb v25r1. Do not edit , the content of these releases is frozen....
Releases based on LHCb v25r2 (and Gaudi v20r2, LCG 55a) This page documents releases based on LHCb v25r2. Do not edit , the content of these releases is frozen....
Releases based on LHCb v26r0 (and Gaudi v20r3, LCG 55b) This page documents releases based on LHCb v26r0. Do not edit , the content of these releases is frozen....
Releases based on LHCb v26r1 (and Gaudi v20r4, LCG 55c) This page documents releases based on LHCb v26r1. Do not edit , the content of these releases is frozen....
Releases based on LHCb v26r2 (and Gaudi v20r4, LCG 55c) This page documents releases based on LHCb v26r2. Do not edit , the content of these releases is frozen....
Releases based on LHCb v27r5 (and Gaudi v21r3, LCG 56b) This page documents releases based on LHCb v27r5. Do not edit , the content of these releases is frozen....
Releases based on LHCb v28r1 (and Gaudi v21r5, LCG 57) This page documents releases based on LHCb v28r1. Do not edit , the content of these releases is frozen. LHCb...
Releases based on LHCb v28r4 (and Gaudi v21r6, LCG 57a) This page documents releases based on LHCb v28r4. Do not edit , the content of these releases is frozen....
Releases based on LHCb v28r5 (and Gaudi v21r6, LCG 57a) This page documents releases based on LHCb v28r5. Do not edit , the content of these releases is frozen....
Releases based on LHCb v29r0 (and Gaudi v21r7, LCG 58) This page documents releases based on LHCb v29r0. Do not edit , the content of these releases is frozen. LHCb...
Releases based on LHCb v29r1 (and Gaudi v21r7p1, LCG 58a) This page documents releases based on LHCb v29r1. Do not edit , the content of these releases is frozen...
Releases based on LHCb v30r0 (and Gaudi v21r8, LCG 58b) This page documents releases based on LHCb v30r0. Do not edit , the content of these releases is frozen....
Muon Alley Conditions L0Muon confirmation Muon PreTrigger Logics Create veloR (2d) tracks Decode L0MuonCandidate Match veloR track with...
Discussion on the Muon Event Model To help in following the discussion, the speaker name is recalled before each paragraph, with the following convention: MC Marco...
LHCb Muon Software Pages These pages contain a guide to the LHCb Muon software activities. Home Page and Muon Home Page Muon software tasks Event model review...
Hlt2 efficiencies and rates Version This is obtained with DaVinci head as of 02/07/09. With the Old version PatVelo v3r13p1 . Hlt1 and 2 rates Hlt1 eff is...
PIDCalib Packages This page provides information on how to use the package for extracting PID performance results from both collision data and MC. Questions or comments...
Last Published Publisher TWikiGuest Date 18 Aug 2008 16:50 {PublishContrib}{Dir} /afs/cern.ch/project/twiki/production/twiki/export/ {PublishContrib}{URL} https...
Using TisTos software with Stripping MicroDSTs Introduction This page is intended for people who wish to use TisTos software for MicroDSTs created in official Stripping...
Trigger Code How to run the HLT? Environment: The LHCb software is organized in projects and each project is divided into packages. In order to be...
Using TriggerTisTos Tool in Python Sample python code shown below is compatible with TriggerTisTos software which was released with DaVinci v25r7 (2010 07 28). See...
TWeeder info for LHCb Total Number of topics: 2912 29 Topics updated during the last 7 days Days Web Topic Date S7 LHCb RichTestBeamMiniDaq...
Number of topics: 83

 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    LHCb All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback