Difference: 2017ChargingCavaliers (1 vs. 11)

Revision 112018-10-21 - InaChalupkova

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

The Charging Cavaliers

Useful links

Line: 139 to 139
  </>
<!--/twistyPlugin-->


-- BranislavRistic - 2017-09-27
Added:
>
>

META FILEATTACHMENT attachment="BL4S-Beam-and-detectors_2017.docx" attr="h" comment="2017 Beam and detectors" date="1540134609" name="BL4S-Beam-and-detectors_2017.docx" path="BL4S-Beam-and-detectors_2017.docx" size="1238843" user="ina" version="1"
 
META PREFERENCE name="ALLOWTOPICCHANGE" title="ALLOWTOPICCHANGE" type="Set" value="Main.AllAuthUsersGroup"
META PREFERENCE name="ALLOWTOPICVIEW" title="ALLOWTOPICVIEW" type="Set" value="Main.AllUsersGroup"
META PREFERENCE name="EDITMETHOD" title="EDITMETHOD" type="Set" value="wysiwyg"

Revision 102017-11-03 - ChargingCavaliersService

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

The Charging Cavaliers

Useful links

Line: 59 to 59
 
5 FCPD1 9 23
6 FCPD2 9 26
Added:
>
>

QDC data

In the data files there are two TTrees ("QDCval") and four histograms.

First, let me quickly explain the data that comes from the QDC and how it has to be used.

  • The QDC basically integrates the waveform (charges a capacitor) and digitises the voltage level of the capacitor. In order to reach a proper linearity even for small signals another small but constant signal is added to the input which results in a non-zero value even when there is nothing connected. This pedestal value has to be subtracted from the recorded signal. You will find the pedestal values in the "env" tree.
  • The next step is then to correct for the different attenuations of the PMT signals that we set to exploit the full dynamic range of the QDC channels. The correction formula is
    Q_in=10^(att[db]/20)Q_meas
    and again you can find the attenuation values in the "env" tree.
  • The corrected data is in the "QDCval" tree (so in principle you do not need the values from "env", but they are still there if you want to play with them).
  • Sometimes the signal could not be digitised properly. In that case the value is set to -1000 or less, so you can easily filter out these events.

There are two histograms per PMT, one shows the original values minus pedestal and the other one is already corrected for the attenuation.

In the hunt folder there are ROOT files for the single runs and two more, combining several runs

  • QDC_hunt.root = 1506857636, 1506863723, 1506870177, 1506877543, 1506892728, 1506908270
  • QDC_italian_runs.root = 1506866356, 1506867864, 1506868985
 

Logo


<!--/twistyPlugin twikiMakeVisibleInline-->

Revision 92017-11-03 - BranislavRistic

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

The Charging Cavaliers

Useful links

Line: 10 to 10
 

Data paths and work directories

First things first: Do not save any data on the Desktop or home directory. If we find files there, they will be immediately moved to the work directory...and given a random name wink

Changed:
<
<
  • Your world: /afs/cern.ch/user/d/daquser/work/public/2017_cc
  • Your world (short): ~/work/public/2017_cc
  • Beam spot histograms: ~/work/public/2017_cc/alignment
  • Temporary files (can be deleted at any time): ~/work/public/2017_cc/tmp
>
>
  • Your world: /eos/user/b/bl4scc
  • Beam spot histograms: /eos/user/b/bl4sccalignment
  • Temporary files (can be deleted at any time): /eos/user/b/bl4scc/tmp
 Please keep these folders nice and clean

How to access data

Line: 23 to 22
 
  • Make sure that in Connection->SSH->X11, "Enable X11 forwarding" is ticked
  • In session: type lxplus.cern.ch as Host Name
  • Click Open
Changed:
<
<
  • Username is daquser
>
>
  • Username is bl4scc
 Linux/macOS
  • Open a terminal
Changed:
<
<
  • Type ssh -Y daquser@lxplus.cern.ch
>
>
  • Type ssh -Y bl4scc@lxplus.cern.ch
 
  • If it asks you to confirm the connection, type yes

Setup environment

Revision 82017-10-25 - BranislavRistic

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

The Charging Cavaliers

Useful links

Line: 41 to 41
 

Setup

Scaler Mapping

Changed:
<
<
Channels Signal
>
>
Channel Signal
 
0 T1
1 T2
2 Muon veto
Line: 53 to 53
 
8 BHT+Muon Veto
15 Time
Added:
>
>
QDC mapping
Channel Signal Attenuation hunt [db] Att calib [db]
0 FCPT1 2.5 11
1 FCPT2 0 8
5 FCPD1 9 23
6 FCPD2 9 26
 

Logo


<!--/twistyPlugin twikiMakeVisibleInline-->

Revision 72017-10-19 - BranislavRistic

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

The Charging Cavaliers

Useful links

Line: 10 to 10
 

Data paths and work directories

First things first: Do not save any data on the Desktop or home directory. If we find files there, they will be immediately moved to the work directory...and given a random name wink

Changed:
<
<
  • Your world: /afs/cern.ch/user/d/daquser/work/public/2017_cc
  • Your world (short): ~/work/public/2017_cc
  • Beam spot histograms: ~/work/public/2017_cc/alignment
  • Temporary files (can be deleted at any time): ~/work/public/2017_cc/tmp
>
>
  • Your world: /afs/cern.ch/user/d/daquser/work/public/2017_cc
  • Your world (short): ~/work/public/2017_cc
  • Beam spot histograms: ~/work/public/2017_cc/alignment
  • Temporary files (can be deleted at any time): ~/work/public/2017_cc/tmp
 Please keep these folders nice and clean

How to access data

Windows

Changed:
<
<
  • Open putty
  • Make sure that in Connection->SSH->X11, "Enable X11 forwarding" is ticked
  • In session: type lxplus.cern.ch as Host Name
  • Click Open
  • Username is daquser
>
>
  • Open putty
  • Make sure that in Connection->SSH->X11, "Enable X11 forwarding" is ticked
  • In session: type lxplus.cern.ch as Host Name
  • Click Open
  • Username is daquser
 Linux/macOS
  • Open a terminal
Changed:
<
<
>
>
  • Type ssh -Y daquser@lxplus.cern.ch
  • If it asks you to confirm the connection, type yes
  Setup environment
Changed:
<
<
  • Once connected to lxplus type: source setupChargingCavaliers.sh (or for the lazy ones, type source setupC and then hit the TAB key)
>
>
  • Once connected to lxplus type: source setupChargingCavaliers.sh (or for the lazy ones, type source setupC and then hit the TAB key)
 
  • You are now in your work folder, ROOT is now available

Starting root and looking at files

Changed:
<
<
  • You can start ROOT by simply typing root
  • new TBrowser starts the graphical user interface
  • If you want to inspect one or more files type root FILENAME1 FILENAME2..... They will then immediately show up in the TBrowser
>
>
  • You can start ROOT by simply typing root
  • new TBrowser starts the graphical user interface
  • If you want to inspect one or more files type root FILENAME1 FILENAME2..... They will then immediately show up in the TBrowser
 

Setup

Scaler Mapping

Changed:
<
<
Channels Signal
>
>
Channels Signal
 
0 T1
1 T2
2 Muon veto
Line: 105 to 105
 
  • FCPD PMT1 in beam direction right: 6094, U_nom=2271V (5000A/lm), 2400V (10000A/lm)
  • FCPD PMT2 in beam direction left: 6093, U_nom=2170V (5000A/lm), 2293V (10000A/lm)
Added:
>
>
PMT U[V] Comments
uV 2080
T1 2060
T2 2030
F1 2100
F2 2200
H0 2140 BL4S 30mm
H1 2060 ATLAS 15mm
 
<!--/twistyPlugin-->


-- BranislavRistic - 2017-09-27

META PREFERENCE name="ALLOWTOPICCHANGE" title="ALLOWTOPICCHANGE" type="Set" value="Main.AllAuthUsersGroup"

Revision 62017-10-02 - AtlasDaqsupService

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

The Charging Cavaliers

Useful links

Line: 53 to 53
 
8 BHT+Muon Veto
15 Time
Added:
>
>

Logo


<!--/twistyPlugin twikiMakeVisibleInline-->
                     `.--.`                                     
             -syyhs-  .:oyhdhhhhhhy/                                  
       `.--.`hdhhdysydddmmmNNNNmmhyds                                 
     ohhhhhhhhhyyyhdmNMMMMMMNdysyssd-                                 
    -dydhhmmddddddmMMMMhos:.  `+mMNhy+:                               
     -od. `-+ydmNNmdy+..y-....`-Nmmmmhss                              
                  :ymNMNh..//:..dmmmhsoo                              
                 oMMMMm-+-   .:omdhhMmssso/:.                         
               /hNMMMMm :/.    -mo+smds//dds/----/+                   
            .oNMMMMMMMMmo-.:::`-hyyso:`oNmssysoyhd.                   
        -dmmMMMMMMMNMMMMMMms:`://-`-+yNNyymddNy. `o/                  
     .ymNMMMNNMMMMMMNMMMMMMMMNy+ydMMMMNhhdNMMMN+`  -o                 
     yMMMMMMMMMMMms/./myhhhhhNMMMMMMMMMMMMMMMMMMh:-.-y`               
     `dMMMMMMMMMy`.mNNMMMMMMMNmdhyso+//+osyhmNMMMMNMMMNm/             
      sMMMMMMMMM:``hMMMd:-.`                   `.-:yMMMN`             
      .mMMMMMMMy```+MMMN`                          hMMNh              
  -mNm-/NMMMMMM-```.NMMM/       ommmmmmmmm/       `MMMN/              
   .-/dNMMMMMMMs``.`yMMMy       sMMMMMMMMM/       +MMMN`              
     -mmNMMMMMMNdNNs/MMMN`      sMMMMMMMMM/       yMMNy               
      /oss+dMMMNMMs-`mMMM/      +MMMMMMMMM:      `NMMN:               
        `-/NNMNMMMMMmmMMMh`      :smMMMds-       sMMMm                
          `oy: .+dMMMMMMMNm+`       `-`        :hMMNN-                
                  .+hMMMMMMMNds/.         `-+yNNMMMMM/                
                     `/hNMMMMMMMMNho/-:+ydMMMMMMMMMMMh                
                        `/yNMMMMMMMMNNMMmhyNMMMMMMMMMM-               
                           `/yNMMMMMMMMMh+- -oMMMMMMMMs    -h.        
                              `:yNMMMMMMMMMN+ sMMMMMMMN`  oMMm`       
                                  :smMMMMMMMMy/mMMMMMMMo.dMMMMd`      
                                     -/+osyhdms+dMMMMMMNNMMhsMMy      
                                                 .omMMMMMd:  -mMs     
                                                    :sNm/     `sN+    
                                                      `         -m/   
                                                                 `s-  
<!--/twistyPlugin-->


Expert section

Here be dragons
 
<!--/twistyPlugin twikiMakeVisibleInline-->

VME addresses

  • V560: 0x2000000

Revision 52017-09-28 - AtlasDaqsupService

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

The Charging Cavaliers

Useful links

Line: 10 to 10
 

Data paths and work directories

First things first: Do not save any data on the Desktop or home directory. If we find files there, they will be immediately moved to the work directory...and given a random name wink

Changed:
<
<
  • Your world: /afs/cern.ch/user/d/daquser/work/public/2017_cc
  • Your world (short): ~/work/public/2017_cc
  • Beam spot histograms: ~/work/public/2017_cc/alignment
  • Temporary files (can be deleted at any time): ~/work/public/2017_cc/tmp
>
>
  • Your world: /afs/cern.ch/user/d/daquser/work/public/2017_cc
  • Your world (short): ~/work/public/2017_cc
  • Beam spot histograms: ~/work/public/2017_cc/alignment
  • Temporary files (can be deleted at any time): ~/work/public/2017_cc/tmp
 Please keep these folders nice and clean

How to access data

Windows

Changed:
<
<
  • Open putty
  • Make sure that in Connection->SSH->X11, "Enable X11 forwarding" is ticked
  • In session: type lxplus.cern.ch as Host Name
  • Click Open
  • Username is daquser
>
>
  • Open putty
  • Make sure that in Connection->SSH->X11, "Enable X11 forwarding" is ticked
  • In session: type lxplus.cern.ch as Host Name
  • Click Open
  • Username is daquser
 Linux/macOS
  • Open a terminal
Changed:
<
<
>
>
  Setup environment
Changed:
<
<
  • Once connected to lxplus type: source setupChargingCavaliers.sh (or for the lazy ones, type source setupC and then hit the TAB key)
>
>
  • Once connected to lxplus type: source setupChargingCavaliers.sh (or for the lazy ones, type source setupC and then hit the TAB key)
 
  • You are now in your work folder, ROOT is now available

Starting root and looking at files

Changed:
<
<
  • You can start ROOT by simply typing root
  • new TBrowser starts the graphical user interface
  • If you want to inspect one or more files type root FILENAME1 FILENAME2..... They will then immediately show up in the TBrowser

<!--/twistyPlugin twikiMakeVisibleInline-->
>
>
  • You can start ROOT by simply typing root
  • new TBrowser starts the graphical user interface
  • If you want to inspect one or more files type root FILENAME1 FILENAME2..... They will then immediately show up in the TBrowser

Setup

Scaler Mapping

Channels Signal
0 T1
1 T2
2 Muon veto
3 Beam
4 H
5 T1+T2
6 Beam veto halo
7 BHT
8 BHT+Muon Veto
15 Time
 
Added:
>
>

<!--/twistyPlugin twikiMakeVisibleInline-->
 

VME addresses

  • V560: 0x2000000
  • V792: 0x0
Line: 52 to 64
 
  • FCPD PMT1 in beam direction right: 6094, U_nom=2271V (5000A/lm), 2400V (10000A/lm)
  • FCPD PMT2 in beam direction left: 6093, U_nom=2170V (5000A/lm), 2293V (10000A/lm)
Changed:
<
<
<!--/twistyPlugin-->


-- BranislavRistic - 2017-09-27
>
>
<!--/twistyPlugin-->


-- BranislavRistic - 2017-09-27
 
META PREFERENCE name="ALLOWTOPICCHANGE" title="ALLOWTOPICCHANGE" type="Set" value="Main.AllAuthUsersGroup"
META PREFERENCE name="ALLOWTOPICVIEW" title="ALLOWTOPICVIEW" type="Set" value="Main.AllUsersGroup"

Revision 42017-09-27 - AtlasDaqsupService

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
Changed:
<
<
For editing this twiki page, you have to be logged in as daquser and click on WYSIWYG at the bottom of the page.
>
>

The Charging Cavaliers

 

Useful links

Line: 59 to 58
 
META PREFERENCE name="ALLOWTOPICCHANGE" title="ALLOWTOPICCHANGE" type="Set" value="Main.AllAuthUsersGroup"
META PREFERENCE name="ALLOWTOPICVIEW" title="ALLOWTOPICVIEW" type="Set" value="Main.AllUsersGroup"
Added:
>
>
META PREFERENCE name="EDITMETHOD" title="EDITMETHOD" type="Set" value="wysiwyg"

Revision 32017-09-27 - AtlasDaqsupService

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
Added:
>
>
For editing this twiki page, you have to be logged in as daquser and click on WYSIWYG at the bottom of the page.
 

Useful links

Added:
>
>
 

Data paths and work directories

Line: 13 to 17
 
  • Temporary files (can be deleted at any time): ~/work/public/2017_cc/tmp
Please keep these folders nice and clean
Deleted:
<
<
 

How to access data

Added:
>
>
 Windows
  • Open putty
Changed:
<
<
  • Make sure that in= Connection->SSH->X11=, "Enable X11 forwarding" is ticked
>
>
  • Make sure that in= Connection->SSH->X11=, "Enable X11 forwarding" is ticked
 
  • In session: type lxplus.cern.ch as Host Name
  • Click Open
  • Username is daquser
Line: 35 to 39
 
  • new TBrowser starts the graphical user interface
  • If you want to inspect one or more files type root FILENAME1 FILENAME2..... They will then immediately show up in the TBrowser
Added:
>
>
<!--/twistyPlugin twikiMakeVisibleInline-->

VME addresses

  • V560: 0x2000000
  • V792: 0x0
  • V1290: 0x4000000
  • V1472: 0x9000000

Setup

  • FCPD PMT1 in beam direction right: 6094, U_nom=2271V (5000A/lm), 2400V (10000A/lm)
  • FCPD PMT2 in beam direction left: 6093, U_nom=2170V (5000A/lm), 2293V (10000A/lm)

<!--/twistyPlugin-->


 -- BranislavRistic - 2017-09-27
Added:
>
>
 
META PREFERENCE name="ALLOWTOPICCHANGE" title="ALLOWTOPICCHANGE" type="Set" value="Main.AllAuthUsersGroup"
META PREFERENCE name="ALLOWTOPICVIEW" title="ALLOWTOPICVIEW" type="Set" value="Main.AllUsersGroup"

Revision 22017-09-27 - BranislavRistic

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Useful links

Line: 36 to 36
 
  • If you want to inspect one or more files type root FILENAME1 FILENAME2..... They will then immediately show up in the TBrowser

-- BranislavRistic - 2017-09-27 \ No newline at end of file

Added:
>
>
META PREFERENCE name="ALLOWTOPICCHANGE" title="ALLOWTOPICCHANGE" type="Set" value="Main.AllAuthUsersGroup"
META PREFERENCE name="ALLOWTOPICVIEW" title="ALLOWTOPICVIEW" type="Set" value="Main.AllUsersGroup"

Revision 12017-09-27 - BranislavRistic

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="WebHome"

Useful links

Data paths and work directories

First things first: Do not save any data on the Desktop or home directory. If we find files there, they will be immediately moved to the work directory...and given a random name wink
  • Your world: /afs/cern.ch/user/d/daquser/work/public/2017_cc
  • Your world (short): ~/work/public/2017_cc
  • Beam spot histograms: ~/work/public/2017_cc/alignment
  • Temporary files (can be deleted at any time): ~/work/public/2017_cc/tmp
Please keep these folders nice and clean

How to access data

Windows
  • Open putty
  • Make sure that in= Connection->SSH->X11=, "Enable X11 forwarding" is ticked
  • In session: type lxplus.cern.ch as Host Name
  • Click Open
  • Username is daquser
Linux/macOS

Setup environment

  • Once connected to lxplus type: source setupChargingCavaliers.sh (or for the lazy ones, type source setupC and then hit the TAB key)
  • You are now in your work folder, ROOT is now available

Starting root and looking at files

  • You can start ROOT by simply typing root
  • new TBrowser starts the graphical user interface
  • If you want to inspect one or more files type root FILENAME1 FILENAME2..... They will then immediately show up in the TBrowser

-- BranislavRistic - 2017-09-27

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback