Difference: ShiftIntroduction (1 vs. 10)

Revision 102015-03-19 - TimBrooks

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools: Shift Introduction

Welcome to BL4S Shift Introduction.

Changed:
<
<
This page is designed to give the shifters general instructions about the shifts in the control room for the BL4S Experiment. There will be three shifts during the day when there is beam but we are taking data for 24h. In each shift, there will be a shift leader, two run control shifters and two detector shifters. You can see the shift schedule in the BL4S Shift Plan.
>
>
This page is designed to give the shifters general instructions about the shifts in the control room for the BL4S Experiment. There will be three shifts during the day when there is beam but we are taking data for 24h. In each shift, there will be a shift leader, two run control shifters and two detector shifters. You can see the shift schedule in the BL4S Shift Plan.
  The timetable of the shift plan is as follows;
Line: 18 to 18
 

Before starting your shift

Changed:
<
<
Please check your shifts in the shift plan and be sure to be in control room 15 minutes before, to take your shift from the previous shifter. You should get the information about the ongoing run and the run plan. You can check the vistar page about the run information from BL4SVistarPage. You should also check the BL4SWhiteBoard about the run plan, the known issues and errors.
>
>
Please check your shifts in the shift plan and be sure to be in control room 15 minutes before, to take your shift from the previous shifter. You should get the information about the ongoing run and the run plan. You can check the vistar page about the run information from BL4SVistarPage. You should also check the WhiteBoard about the run plan, the known issues and errors.
 

During your shift

Changed:
<
<
During your shift, you are responsible from some duties depending on your task. You can see them in details in the pages BL4SRunControlShifterInstructions and BL4SDetectorShifterInstructions. You should always observe the system and check everything once an hour in detail. If there is an error or any change first check the BL4SWhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.
>
>
During your shift, you are responsible from some duties depending on your task. You can see them in details in the pages RunControlShifterInstructions and DetectorShifterInstructions. You should always observe the system and check everything once an hour in detail. If there is an error or any change first check the WhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.
  If you are faced with an error or warning, make an e-log about it on logbook (unless it is stated not to make in the white board). You can find the detailed information about making an e-log entry in the BL4S E-Log page below!
Line: 38 to 38
  Here is the screenshot of the e-log page:
Changed:
<
<
e-log_screenshot.png
>
>
e-log_screenshot.png
  On the screen, you will see the final post at the top. On the left, under "Useful Links", you can find links to twiki pages and the vistar page. On the right, you can find the blog tools, where you can create a new log entry.
Line: 46 to 46
  To create a new log, you can simply click on the "create a post" on the Blog tools. A pop up window will appear on the screen. You can see the screenshot below.
Changed:
<
<
new_e-log.png
>
>
new_e-log.png
  In the pop up window, write the title and enough information about the entry on the body. If you would like to add a picture or a screenshot you can use the insert part on the top. To take a screenshot simply press the "Print Scrn" button on your keyboard. Then save the picture in "Pictures" folder with a explanatory name in format of png or jpeg. Do not forget to select and add relevant categories. After you finish your post you can publish it using the "Publish" button at the bottom or at the top.

Revision 92014-09-01 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Changed:
<
<

Beam Line For Schools Shift Introduction

>
>

Beam Line For Schools: Shift Introduction

  Welcome to BL4S Shift Introduction.
Changed:
<
<
This page is designed to give the shifters general instructions about the shifts in control room for BL4S Experiment. There will be three shifts during the day when there is a beam but we are taking data for 24h. In each shift, there will be a shift leader, two run control shifters and two detector shifters. You can see the shift schedule in BL4S Shift Plan.
>
>
This page is designed to give the shifters general instructions about the shifts in the control room for the BL4S Experiment. There will be three shifts during the day when there is beam but we are taking data for 24h. In each shift, there will be a shift leader, two run control shifters and two detector shifters. You can see the shift schedule in the BL4S Shift Plan.
  The timetable of the shift plan is as follows;
Line: 22 to 22
 

During your shift

Changed:
<
<
During your shift, you are responsible from some duties depending on your task. You can see them in detailed in pages BL4SRunControlShifterInstructions and BL4SDetectorShifterInstructions. You should always observe the system and check everything once in an hour in detail. If there is an error or any change first check the BL4SWhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.
>
>
During your shift, you are responsible from some duties depending on your task. You can see them in details in the pages BL4SRunControlShifterInstructions and BL4SDetectorShifterInstructions. You should always observe the system and check everything once an hour in detail. If there is an error or any change first check the BL4SWhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.
 
Changed:
<
<
If you face with an error or warning, make an e-log about it on logbook (unless it is stated not to make in white board). You can find the detailed information about making e-log enty in BL4S E-Log page below!
>
>
If you are faced with an error or warning, make an e-log about it on logbook (unless it is stated not to make in the white board). You can find the detailed information about making an e-log entry in the BL4S E-Log page below!
 

After your shift

Changed:
<
<
After your shift, write a shift summary in the e-log. Shift summary should summarize what has happened during your shift. Wait for the next shifter and tell the status of the beam, run, detectors etc. clearly and warn about any important notices for the ongoing or next runs.
>
>
After your shift, write a shift summary in the e-log. The shift summary should summarize what has happened during your shift. Wait for the next shifter and tell the status of the beam, run, detectors etc. clearly and warn about any important notices for the ongoing or next runs.
 

BL4S E-Log

Line: 44 to 44
  You can scroll down for the oldest entries or you can use the search toolbar on the right top ("Search this site..."). You can also click on the categories if you are looking for a specific topic.
Changed:
<
<
To create a new log, you can simply click on the "create a post" on the Blog tools. New pop up window will appear on the screen. You can see the screenshot below.
>
>
To create a new log, you can simply click on the "create a post" on the Blog tools. A pop up window will appear on the screen. You can see the screenshot below.
  new_e-log.png
Changed:
<
<
On the pop up window, write the title and and enough information about the entry on the body. If you would like to add a picture or a screenshot you can use insert part on the top. To take a screenshot simply press the "Print Scrn" button on your keyboard. Then save the picture in "Pictures" folder with a explanatory name in format of png or jpeg. Do not forget to select and add relevant categories. After you finish your post you can publish it using the "Publish" button at the bottom or at the top.
>
>
In the pop up window, write the title and enough information about the entry on the body. If you would like to add a picture or a screenshot you can use the insert part on the top. To take a screenshot simply press the "Print Scrn" button on your keyboard. Then save the picture in "Pictures" folder with a explanatory name in format of png or jpeg. Do not forget to select and add relevant categories. After you finish your post you can publish it using the "Publish" button at the bottom or at the top.
 
Changed:
<
<
If you make an e-log and would like to change or add something, you can click on the topic of the e-log and then click the edit button on the right top. When the run is finished, stop time of the run and the number of events read is added this way. Otherwise, it is not advised to change submitted e-log, but you can use the "comment" section instead.
>
>
If you make an e-log and would like to change or add something, you can click on the topic of the e-log and then click the edit button on the right top. When the run is finished, stop time of the run and the number of events read are added this way. Otherwise, it is not advised to change the submitted e-log, but you can use the "comment" section instead.
  -- SaimeSarikaya - 12 Aug 2014

Revision 82014-08-27 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Shift Introduction

Line: 18 to 18
 

Before starting your shift

Changed:
<
<
Please check your shifts in the shift plan and be sure to be in control room 15 minutes before your shift, to take your shift from the previous shifter. You should get the information about the ongoing run and the run plan. You can also check the whiteboard and the vistar page about the run information from BL4SWhiteBoard or BL4SVistarPage. You should also check the BL4SWhiteBoard about the known issues and errors.
>
>
Please check your shifts in the shift plan and be sure to be in control room 15 minutes before, to take your shift from the previous shifter. You should get the information about the ongoing run and the run plan. You can check the vistar page about the run information from BL4SVistarPage. You should also check the BL4SWhiteBoard about the run plan, the known issues and errors.
 

During your shift

Line: 41 to 42
  On the screen, you will see the final post at the top. On the left, under "Useful Links", you can find links to twiki pages and the vistar page. On the right, you can find the blog tools, where you can create a new log entry.
Changed:
<
<
You can scroll down for the oldest entries or you can use the search toolbar on the right top ("Search this site..."). You can also click on the categories if you are looking for a spesific topic.
>
>
You can scroll down for the oldest entries or you can use the search toolbar on the right top ("Search this site..."). You can also click on the categories if you are looking for a specific topic.
 
Changed:
<
<
To create a new run, you can simply click on the "create a post" on the Blog tools. New pop up window will appear on the screen. You can see the screenshot below.
>
>
To create a new log, you can simply click on the "create a post" on the Blog tools. New pop up window will appear on the screen. You can see the screenshot below.
  new_e-log.png
Changed:
<
<
On the pop up window, write your title and and enough information about the entry on the body. If you would like to add a picture or a screenshot you can use insert part on the top. To take a screenshot simply press the "Print Scrn" button on your keyboard. Then save the picture in "Pictures" folder with a explanotary name in format of png or jpeg. Do not forget to select and add relevant categories. After you finish your post you can publish it using the "Publish" button at the bottom or at the top.
>
>
On the pop up window, write the title and and enough information about the entry on the body. If you would like to add a picture or a screenshot you can use insert part on the top. To take a screenshot simply press the "Print Scrn" button on your keyboard. Then save the picture in "Pictures" folder with a explanatory name in format of png or jpeg. Do not forget to select and add relevant categories. After you finish your post you can publish it using the "Publish" button at the bottom or at the top.

If you make an e-log and would like to change or add something, you can click on the topic of the e-log and then click the edit button on the right top. When the run is finished, stop time of the run and the number of events read is added this way. Otherwise, it is not advised to change submitted e-log, but you can use the "comment" section instead.

  -- SaimeSarikaya - 12 Aug 2014

Revision 72014-08-25 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Shift Introduction

Changed:
<
<
Welcome to BL4S Shift Introduction.
>
>
Welcome to BL4S Shift Introduction.
 
Changed:
<
<
This page is designed to give the shifter the general instructions about the shifts. There will be three shifts during the day when there is a beam and we are taking data. In each shift, there will be a shift leader, two run control shifters and two detector and daq shifters. You can see the shift schedule in BL4S Shift Plan.
>
>
This page is designed to give the shifters general instructions about the shifts in control room for BL4S Experiment. There will be three shifts during the day when there is a beam but we are taking data for 24h. In each shift, there will be a shift leader, two run control shifters and two detector shifters. You can see the shift schedule in BL4S Shift Plan.
  The timetable of the shift plan is as follows;
Line: 12 to 12
 
Afternoon Shifts 13:00 - 17:00
Evening Shifts 17:00 - 21:00
Changed:
<
<
The aim of the shifts is to check the systems related to your desk. During your shift, you will be in contact with the other shifters. If you are not sure about which action to take at any stage or in case of error or warning, you can always ask the shift leader or call the on call experts.
>
>
The aim of the shifts is to check the systems related to your task. During your shift, you should always be in contact with the other shifters. If you are not sure about which action to take at any step or in case of error or warning, you can always ask the shift leader or call the on call experts.
 
Line: 22 to 22
 

During your shift

Changed:
<
<
During your shift, you are responsible from some duties depending on your desk. You can see them in detailed in pages BL4SRunControlShifterInstructions and BL4SDetectorAndDAQShifterInstructions. You should check the system every hour. If there is an error or any change first check the BL4SWhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.
>
>
During your shift, you are responsible from some duties depending on your task. You can see them in detailed in pages BL4SRunControlShifterInstructions and BL4SDetectorShifterInstructions. You should always observe the system and check everything once in an hour in detail. If there is an error or any change first check the BL4SWhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.
  If you face with an error or warning, make an e-log about it on logbook (unless it is stated not to make in white board). You can find the detailed information about making e-log enty in BL4S E-Log page below!

After your shift

Changed:
<
<
After your shift, write a shift summary in the e-log. Shift summary should summarize what has happened during your shift. Wait for the next shifter and tell the status of the beam, run etc. clearly and warn about any important notices for the ongoing or next runs.
>
>
After your shift, write a shift summary in the e-log. Shift summary should summarize what has happened during your shift. Wait for the next shifter and tell the status of the beam, run, detectors etc. clearly and warn about any important notices for the ongoing or next runs.
 

BL4S E-Log

Go to page https://espace.cern.ch/project-blfs/bl4s-elog-2014/default.aspx

Revision 62014-08-22 - MarkusJoos

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Shift Introduction

Welcome to BL4S Shift Introduction.

Changed:
<
<
This page is designed to give the shifter the general instructions about the shifts. There will be three shifts during the day when there is a beam and we are taking data. In each shift, there will be a shift leader, two run control shifter and two detector and daq shifter. You can see the shift schedule in BL4S Shift Plan.
>
>
This page is designed to give the shifter the general instructions about the shifts. There will be three shifts during the day when there is a beam and we are taking data. In each shift, there will be a shift leader, two run control shifters and two detector and daq shifters. You can see the shift schedule in BL4S Shift Plan.
  The timetable of the shift plan is as follows;
Line: 38 to 38
  e-log_screenshot.png
Changed:
<
<
On the screen, you will see the final post at the top. On the left there is a useful links where you can find lins to twiki pages and vistar page. On the right, you can find the blog tools, where you can create a new log entry.
>
>
On the screen, you will see the final post at the top. On the left, under "Useful Links", you can find links to twiki pages and the vistar page. On the right, you can find the blog tools, where you can create a new log entry.
  You can scroll down for the oldest entries or you can use the search toolbar on the right top ("Search this site..."). You can also click on the categories if you are looking for a spesific topic.

Revision 52014-08-13 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Shift Introduction

Revision 42014-08-12 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Changed:
<
<
Beam Line For Schools Shift Introduction
>
>

Beam Line For Schools Shift Introduction

  Welcome to BL4S Shift Introduction.
Line: 15 to 14
  The aim of the shifts is to check the systems related to your desk. During your shift, you will be in contact with the other shifters. If you are not sure about which action to take at any stage or in case of error or warning, you can always ask the shift leader or call the on call experts.
Added:
>
>
 

Before starting your shift

Please check your shifts in the shift plan and be sure to be in control room 15 minutes before your shift, to take your shift from the previous shifter. You should get the information about the ongoing run and the run plan. You can also check the whiteboard and the vistar page about the run information from BL4SWhiteBoard or BL4SVistarPage. You should also check the BL4SWhiteBoard about the known issues and errors.

Line: 23 to 24
  During your shift, you are responsible from some duties depending on your desk. You can see them in detailed in pages BL4SRunControlShifterInstructions and BL4SDetectorAndDAQShifterInstructions. You should check the system every hour. If there is an error or any change first check the BL4SWhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.
Changed:
<
<
If you face with an error or warning, make an e-log about it on logbook (unless it is stated not to make in white board). You can find the detailed information about making e-log enty in BL4SELog page below/
>
>
If you face with an error or warning, make an e-log about it on logbook (unless it is stated not to make in white board). You can find the detailed information about making e-log enty in BL4S E-Log page below!

After your shift

 
Added:
>
>
After your shift, write a shift summary in the e-log. Shift summary should summarize what has happened during your shift. Wait for the next shifter and tell the status of the beam, run etc. clearly and warn about any important notices for the ongoing or next runs.
 

BL4S E-Log

Go to page https://espace.cern.ch/project-blfs/bl4s-elog-2014/default.aspx

Line: 33 to 36
  Here is the screenshot of the e-log page:
Changed:
<
<
e-log_screenshot.png
>
>
e-log_screenshot.png
  On the screen, you will see the final post at the top. On the left there is a useful links where you can find lins to twiki pages and vistar page. On the right, you can find the blog tools, where you can create a new log entry.
Changed:
<
<
You can scroll down for the oldest entries or you can use the seacrh toolbar on the right top. You can also click on the categories if you are looking for a spesific topic.
>
>
You can scroll down for the oldest entries or you can use the search toolbar on the right top ("Search this site..."). You can also click on the categories if you are looking for a spesific topic.

To create a new run, you can simply click on the "create a post" on the Blog tools. New pop up window will appear on the screen. You can see the screenshot below.

new_e-log.png

 
Changed:
<
<
new_e-log.png
>
>
On the pop up window, write your title and and enough information about the entry on the body. If you would like to add a picture or a screenshot you can use insert part on the top. To take a screenshot simply press the "Print Scrn" button on your keyboard. Then save the picture in "Pictures" folder with a explanotary name in format of png or jpeg. Do not forget to select and add relevant categories. After you finish your post you can publish it using the "Publish" button at the bottom or at the top.
  -- SaimeSarikaya - 12 Aug 2014

Revision 32014-08-12 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Beam Line For Schools Shift Introduction
Line: 25 to 25
  If you face with an error or warning, make an e-log about it on logbook (unless it is stated not to make in white board). You can find the detailed information about making e-log enty in BL4SELog page below/
Changed:
<
<

BL4SELog

>
>

BL4S E-Log

  Go to page https://espace.cern.ch/project-blfs/bl4s-elog-2014/default.aspx
Changed:
<
<
You will see the
>
>
You also find the link in your toolbar in mozilla firefox as e-log.

Here is the screenshot of the e-log page:

e-log_screenshot.png

On the screen, you will see the final post at the top. On the left there is a useful links where you can find lins to twiki pages and vistar page. On the right, you can find the blog tools, where you can create a new log entry.

You can scroll down for the oldest entries or you can use the seacrh toolbar on the right top. You can also click on the categories if you are looking for a spesific topic.

new_e-log.png

  -- SaimeSarikaya - 12 Aug 2014
Added:
>
>
META FILEATTACHMENT attachment="e-log_screenshot.png" attr="" comment="Screenshot of E-Log" date="1407846981" name="e-log_screenshot.png" path="e-log_screenshot.png" size="139854" user="ssarikay" version="1"
META FILEATTACHMENT attachment="new_e-log.png" attr="" comment="New E-Log" date="1407846998" name="new_e-log.png" path="new_e-log.png" size="102211" user="ssarikay" version="1"

Revision 22014-08-12 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Beam Line For Schools Shift Introduction

Welcome to BL4S Shift Introduction.

Changed:
<
<
This page is designed to give the shifter the general instructions about the shifts. There will be three shifts during the day when there is a beam and we are taking data. In each shift, there will be a shift leader, two run control shifter and two detector and daq shifter. You can see the shift schedule in BL4SShiftPlan.
>
>
This page is designed to give the shifter the general instructions about the shifts. There will be three shifts during the day when there is a beam and we are taking data. In each shift, there will be a shift leader, two run control shifter and two detector and daq shifter. You can see the shift schedule in BL4S Shift Plan.
  The timetable of the shift plan is as follows;

Revision 12014-08-12 - SaimeSarikaya

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="BeamLineForSchools"
Beam Line For Schools Shift Introduction

Welcome to BL4S Shift Introduction.

This page is designed to give the shifter the general instructions about the shifts. There will be three shifts during the day when there is a beam and we are taking data. In each shift, there will be a shift leader, two run control shifter and two detector and daq shifter. You can see the shift schedule in BL4SShiftPlan.

The timetable of the shift plan is as follows;

Morning Shifts 09:00 - 13:00
Afternoon Shifts 13:00 - 17:00
Evening Shifts 17:00 - 21:00

The aim of the shifts is to check the systems related to your desk. During your shift, you will be in contact with the other shifters. If you are not sure about which action to take at any stage or in case of error or warning, you can always ask the shift leader or call the on call experts.

Before starting your shift

Please check your shifts in the shift plan and be sure to be in control room 15 minutes before your shift, to take your shift from the previous shifter. You should get the information about the ongoing run and the run plan. You can also check the whiteboard and the vistar page about the run information from BL4SWhiteBoard or BL4SVistarPage. You should also check the BL4SWhiteBoard about the known issues and errors.

During your shift

During your shift, you are responsible from some duties depending on your desk. You can see them in detailed in pages BL4SRunControlShifterInstructions and BL4SDetectorAndDAQShifterInstructions. You should check the system every hour. If there is an error or any change first check the BL4SWhiteBoard if it is a known issue. If it is written on the White Board take the action recommended. If not, discuss with the shift leader. If you still have doubts, call the on call expert.

If you face with an error or warning, make an e-log about it on logbook (unless it is stated not to make in white board). You can find the detailed information about making e-log enty in BL4SELog page below/

BL4SELog

Go to page https://espace.cern.ch/project-blfs/bl4s-elog-2014/default.aspx

You will see the

-- SaimeSarikaya - 12 Aug 2014

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback