Difference: WhiteBoard (1 vs. 62)

Revision 612014-10-15 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Line: 87 to 87
 

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410464671 BL4S_110920141315.cfg see table below see table below
1410509094 BL4S_110920141315.cfg see table below see table below
1410511254 BL4S_110920141315.cfg see table below see table below
1410515197 BL4S_110920141315.cfg see table below see table below
1410521088 BL4S_110920141315.cfg see table below see table below
1410526251 BL4S_110920141315.cfg see table below see table below
1410529431 BL4S_110920141315.cfg see table below see table below
1410531716 BL4S_110920141315.cfg see table below see table below
1410533293 BL4S_110920141315.cfg see table below see table below
1410541155 BL4S_110920141315.cfg see table below see table below
1410544349 BL4S_110920141315.cfg see table below see table below
1410547630 BL4S_110920141315.cfg see table below see table below
1410548915 BL4S_110920141315.cfg see table below see table below
>
>
1410464671 BL4S_110920141315.cfg 4GeV muon DCC 16-19
1410509094 BL4S_110920141315.cfg 1GeV electron DCC 16-19
1410511254 BL4S_110920141315.cfg 2GeV electron DCC 16-19
1410515197 BL4S_110920141315.cfg 3GeV electron DCC 16-19
1410521088 BL4S_110920141315.cfg 3GeV electron DCC 20-23
1410526251 BL4S_110920141315.cfg 2GeV electron DCC 20-23
1410529431 BL4S_110920141315.cfg 1GeV electron DCC 20-23
1410531716 BL4S_110920141315.cfg 0.5GeV electron DCC 20-23
1410533293 BL4S_110920141315.cfg 0.5GeV electron DCC 16-19
1410541155 BL4S_110920141315.cfg 4GeV electron DCC 16-19
1410544349 BL4S_110920141315.cfg 4GeV electron DCC 20-23
1410547630 BL4S_110920141315.cfg 4GeV muon DCC 20-23
1410548915 BL4S_110920141315.cfg 4GeV pion DCC 20-23
 

<!-- /editTable -->

Revision 602014-10-06 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Line: 21 to 21
 Note: During the installation, select the option "Add root to the system PATH for all users"

Linux

Changed:
<
<
On linux, if you use SLC6 (Scientific Linux CERN), you can install root from software repositories (there is a program called "yum" to install packages in SLC) In other linux distributions(ROOT should work in any linux distribution.), you may need to install it from source code, which is explained at : http://root.cern.ch/drupal/content/installing-root-source
>
>
On linux, if you use SLC6 (Scientific Linux CERN), you can install root from software repositories (there is a program called "yum" to install packages in SLC)
In other linux distributions(ROOT should work in any linux distribution.), you may need to install it from source code, which is explained at : http://root.cern.ch/drupal/content/installing-root-source
 Note that it may be complicated, and you may ask help if needed.

Analysing data using root files

Line: 48 to 48
 

Detector Calibration Runs 11.09.2014

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410420649 BL4S_100920142001.cfg SC0 + Halo Left (moved in front of beam) 4GeV, Used run to focus beam, no need to analyse
1410433832 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run after installing DCC off beam axis
1410442261 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run to check DWC2 problem
1410444821 BL4S_110920141315.cfg SC0 + Halo L 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410446299 BL4S_110920141315.cfg SC0 + CH0 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410449833 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410452450 BL4S_110920141315.cfg CH0+SC0 and vetoed by CH1 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410454128 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 bar, CH1: 1.2bar
1410456004 BL4S_110920141315.cfg SC0 + HaloLeft 4GeV, Test Cherenkovs, CH0: 2.0 bar, CH1: 1.2bar
1410458704 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG10
1410460208 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG6
1410536278 BL4S_110920141315.cfg SC0 + CH0 Run to Calibrate DWC positions, beam was 10 GeV, focused on DWC0, intensity high.
>
>
1410420649 BL4S_100920142001.cfg SC0 + Halo Left (moved in front of beam) 4GeV, Used run to focus beam, no need to analyse
1410433832 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run after installing DCC off beam axis
1410442261 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run to check DWC2 problem
1410444821 BL4S_110920141315.cfg SC0 + Halo L 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410446299 BL4S_110920141315.cfg SC0 + CH0 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410449833 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410452450 BL4S_110920141315.cfg CH0+SC0 and vetoed by CH1 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410454128 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 bar, CH1: 1.2bar
1410456004 BL4S_110920141315.cfg SC0 + HaloLeft 4GeV, Test Cherenkovs, CH0: 2.0 bar, CH1: 1.2bar
1410458704 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG10
1410460208 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG6
1410536278 BL4S_110920141315.cfg SC0 + CH0 Run to Calibrate DWC positions, beam was 10 GeV, focused on DWC0, intensity high.
 

Pion runs

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410551599 BL4S_120920142203.cfg Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 BL4S_120920142203.cfg Pion(4GeV) Pion run.
1410607383 BL4S_120920142203.cfg Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 BL4S_120920142203.cfg Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 BL4S_120920142203.cfg Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 BL4S_140920141040.cfg Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263 BL4S_140920141315.cfg Pion(10GeV) Same trigger as before.
1410713390 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger Trial
1410722564 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger
1410777795 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410794919 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410864843 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
1410888987 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages still as last run)
>
>
1410551599 BL4S_120920142203.cfg Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 BL4S_120920142203.cfg Pion(4GeV) Pion run.
1410607383 BL4S_120920142203.cfg Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 BL4S_120920142203.cfg Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 BL4S_120920142203.cfg Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 BL4S_140920141040.cfg Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263 BL4S_140920141315.cfg Pion(10GeV) Same trigger as before.
1410713390 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger Trial
1410722564 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger
1410777795 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410794919 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410864843 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
1410888987 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages still as last run)
 

DCC Calibration Runs

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410464671 BL4S_110920141315.cfg see table below see table below
1410509094 BL4S_110920141315.cfg see table below see table below
1410511254 BL4S_110920141315.cfg see table below see table below
1410515197 BL4S_110920141315.cfg see table below see table below
1410521088 BL4S_110920141315.cfg see table below see table below
1410526251 BL4S_110920141315.cfg see table below see table below
1410529431 BL4S_110920141315.cfg see table below see table below
1410531716 BL4S_110920141315.cfg see table below see table below
1410533293 BL4S_110920141315.cfg see table below see table below
1410541155 BL4S_110920141315.cfg see table below see table below
1410544349 BL4S_110920141315.cfg see table below see table below
1410547630 BL4S_110920141315.cfg see table below see table below
1410548915 BL4S_110920141315.cfg see table below see table below
>
>
1410464671 BL4S_110920141315.cfg see table below see table below
1410509094 BL4S_110920141315.cfg see table below see table below
1410511254 BL4S_110920141315.cfg see table below see table below
1410515197 BL4S_110920141315.cfg see table below see table below
1410521088 BL4S_110920141315.cfg see table below see table below
1410526251 BL4S_110920141315.cfg see table below see table below
1410529431 BL4S_110920141315.cfg see table below see table below
1410531716 BL4S_110920141315.cfg see table below see table below
1410533293 BL4S_110920141315.cfg see table below see table below
1410541155 BL4S_110920141315.cfg see table below see table below
1410544349 BL4S_110920141315.cfg see table below see table below
1410547630 BL4S_110920141315.cfg see table below see table below
1410548915 BL4S_110920141315.cfg see table below see table below
 

<!-- /editTable -->

Revision 592014-10-06 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Line: 12 to 12
 

Tips on Root files

Downloading ROOT

Changed:
<
<
To use root files, you need to install ROOT to your computer.
>
>
To use root files, you need to install ROOT to your computer. The recommended version is at the following link:
http://root.cern.ch/drupal/content/production-version-534
 
Changed:
<
<

Windows

>
>
Windows
 If you are using windows, go to bottom of the page and download the windows binary.
Changed:
<
<
http://root.cern.ch/drupal/content/production-version-534
It is advised to chose this version: ftp://root.cern.ch/root/root_v5.34.21.win32.vc11.exe
>
>
It is advised to chose the following: ftp://root.cern.ch/root/root_v5.34.21.win32.vc11.exe
 Note: During the installation, select the option "Add root to the system PATH for all users"
Changed:
<
<

Linux

On linux, you can follow the instruction at: http://root.cern.ch/drupal/content/downloading-root
Note that it may be complicated, and you may ask help if needed. If you want to install Scientific Linux CERN (which has ROOT in its software repositories) you can take a look at http://linux.web.cern.ch/linux/scientific6/ In principle, ROOT should work in any linux distribution.
>
>
Linux
On linux, if you use SLC6 (Scientific Linux CERN), you can install root from software repositories (there is a program called "yum" to install packages in SLC) In other linux distributions(ROOT should work in any linux distribution.), you may need to install it from source code, which is explained at : http://root.cern.ch/drupal/content/installing-root-source Note that it may be complicated, and you may ask help if needed.
 

Analysing data using root files

You may already know how to use root files. We changed some variable names, and made a guide to explain each variable:

Revision 582014-10-03 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"
Changed:
<
<

Beam Line For Schools Experiment White Board

>
>
 
Deleted:
<
<
This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.
 
Changed:
<
<

Todays shifters (16.09.2014)

>
>
Beam Line For Schools Experiment White Board
 
Changed:
<
<
  Morning Afternoon Evening
Shift Leader Saime Cenk Saime
Run Control Shifter Augusta & George & Kostas Rolf & Antonia Elli & Christodoulos
Detector Shifter Chris & Milou Olaf & Nick & Savina Artemis & Lisa
<!-- /editTable -->
>
>

2014 BL4S Runs

 
Changed:
<
<

Run Plan of the day

>
>
In this section, one can find the run numbers and explanations for all the runs. One can download the ROOT file by simply clicking on the run number.
 
Changed:
<
<

Known Issues

>
>

Tips on Root files

Downloading ROOT

 
Changed:
<
<
ERORR TYPE THE MESSAGE WHAT TO DO
CHIP error on ERS 16:00:44 ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Stopless removal: Failed to reset the ResInfoProvider after stop of run. Ignore
DWC2 OH counts on OH Display counts of the DWC2 is ~10 times lower than others Check the cables
CHIP Error ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Test failure for application: BL4SApp , result: FAILED Immediately tell shift leader
     
<!-- /editTable -->
>
>
To use root files, you need to install ROOT to your computer.
 
Changed:
<
<

Mesage Board

>
>

Windows

If you are using windows, go to bottom of the page and download the windows binary.
http://root.cern.ch/drupal/content/production-version-534
It is advised to chose this version: ftp://root.cern.ch/root/root_v5.34.21.win32.vc11.exe
Note: During the installation, select the option "Add root to the system PATH for all users"
 
Added:
>
>

Linux

On linux, you can follow the instruction at: http://root.cern.ch/drupal/content/downloading-root
Note that it may be complicated, and you may ask help if needed. If you want to install Scientific Linux CERN (which has ROOT in its software repositories) you can take a look at http://linux.web.cern.ch/linux/scientific6/ In principle, ROOT should work in any linux distribution.
 
Added:
>
>

Analysing data using root files

You may already know how to use root files. We changed some variable names, and made a guide to explain each variable: https://www.cern.ch/test-bl4swebcam/bl4s_tree_explanation.txt
 
Deleted:
<
<

On Call Experts

 
Changed:
<
<
Cenk Yildiz: 74948 ( +41 22 76 74948)
>
>
We also wrote a simple example program, to show how to automatically plot histograms from the root file without using "TBrowser" as you have done at CERN. If you are interested, you can try going further to analyse root files writing your own programs, instead of using the graphical interface. In the file, we explain how to use it. Download the file here.
 
Changed:
<
<
Saime Gurbuz: 076 609 96 34
>
>
If the information in the below table is not enough, you can go to Electronic Log Book to get more information about the runs.

Going Deeper in ROOT

You can always check root website for tutorials/ guides: http://root.cern.ch

You can also find many tutorials on the internet. A tutorial that can be very helpful is below(It has advanced stuff too)
http://www.linksceem.eu/ls2/images/stories/ROOT_Day1.pdf
http://www.linksceem.eu/ls2/images/stories/ROOT_Day2.pdf
http://www.linksceem.eu/ls2/images/stories/ROOT_Day3.pdf
http://www.linksceem.eu/ls2/images/stories/ROOT_Day4.pdf
http://www.linksceem.eu/ls2/images/stories/ROOT_Day5.pdf

 
Deleted:
<
<
Markus Joos: 160663
 

Detector Calibration Runs 11.09.2014

<!-- /editTable -->
Line: 109 to 119
 
3GeV 1410521088    
4GeV 1410544349 1410547630 1410548915
Added:
>
>

BL4S White Board

This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.

Todays shifters (16.09.2014)

  Morning Afternoon Evening
Shift Leader Saime Cenk Saime
Run Control Shifter Augusta & George & Kostas Rolf & Antonia Elli & Christodoulos
Detector Shifter Chris & Milou Olaf & Nick & Savina Artemis & Lisa
<!-- /editTable -->

Run Plan of the day

Known Issues

ERORR TYPE THE MESSAGE WHAT TO DO
CHIP error on ERS 16:00:44 ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Stopless removal: Failed to reset the ResInfoProvider after stop of run. Ignore
DWC2 OH counts on OH Display counts of the DWC2 is ~10 times lower than others Check the cables
CHIP Error ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Test failure for application: BL4SApp , result: FAILED Immediately tell shift leader
     
<!-- /editTable -->

Mesage Board

On Call Experts

Cenk Yildiz: 74948 ( +41 22 76 74948)

Saime Gurbuz: 076 609 96 34

Markus Joos: 160663

 

BL4S weekly Shift Plan

Shift Leader

Revision 572014-10-03 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.

Changed:
<
<

(Last Day) Todays shifters (16.09.2014)

>
>

Todays shifters (16.09.2014)

 

  Morning Afternoon Evening
<!-- /editTable -->
Line: 14 to 14
 

Run Plan of the day

Deleted:
<
<
- Pion Experiment 7GeV

- Do a study with Cherenkovs

 

Known Issues

<!-- /editTable -->
Line: 25 to 22
 
DWC2 OH counts on OH Display counts of the DWC2 is ~10 times lower than others Check the cables
CHIP Error ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Test failure for application: BL4SApp , result: FAILED Immediately tell shift leader
     
Added:
>
>
 

Mesage Board

Changed:
<
<
Ignore the DWC and Scintillator Histograms during Lead Glass Calibration.
>
>
 

On Call Experts

Cenk Yildiz: 74948 ( +41 22 76 74948)

Line: 37 to 36
 Markus Joos: 160663

Detector Calibration Runs 11.09.2014

Deleted:
<
<
 
Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410420649 BL4S_100920142001.cfg SC0 + Halo Left (moved in front of beam) 4GeV, Used run to focus beam, no need to analyse
1410433832 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run after installing DCC off beam axis
1410442261 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run to check DWC2 problem
1410444821 BL4S_110920141315.cfg SC0 + Halo L 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410446299 BL4S_110920141315.cfg SC0 + CH0 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410449833 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410452450 BL4S_110920141315.cfg CH0+SC0 and vetoed by CH1 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410454128 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 bar, CH1: 1.2bar
1410456004 BL4S_110920141315.cfg SC0 + HaloLeft 4GeV, Test Cherenkovs, CH0: 2.0 bar, CH1: 1.2bar
1410458704 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG10
1410460208 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG6
1410536278 BL4S_110920141315.cfg SC0 + CH0 Run to Calibrate DWC positions, beam was 10 GeV, focused on DWC0, intensity high.
>
>
1410420649 BL4S_100920142001.cfg SC0 + Halo Left (moved in front of beam) 4GeV, Used run to focus beam, no need to analyse
1410433832 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run after installing DCC off beam axis
1410442261 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run to check DWC2 problem
1410444821 BL4S_110920141315.cfg SC0 + Halo L 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410446299 BL4S_110920141315.cfg SC0 + CH0 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410449833 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410452450 BL4S_110920141315.cfg CH0+SC0 and vetoed by CH1 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410454128 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 bar, CH1: 1.2bar
1410456004 BL4S_110920141315.cfg SC0 + HaloLeft 4GeV, Test Cherenkovs, CH0: 2.0 bar, CH1: 1.2bar
1410458704 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG10
1410460208 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG6
1410536278 BL4S_110920141315.cfg SC0 + CH0 Run to Calibrate DWC positions, beam was 10 GeV, focused on DWC0, intensity high.
 

Pion runs

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410551599 BL4S_120920142203.cfg Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 BL4S_120920142203.cfg Pion(4GeV) Pion run.
1410607383 BL4S_120920142203.cfg Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 BL4S_120920142203.cfg Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 BL4S_120920142203.cfg Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 BL4S_140920141040.cfg Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263 BL4S_140920141315.cfg Pion(10GeV) Same trigger as before.
1410713390 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger Trial
1410722564 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger
1410777795 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410794919 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410864843 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
1410888987 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages still as last run)
>
>
1410551599 BL4S_120920142203.cfg Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 BL4S_120920142203.cfg Pion(4GeV) Pion run.
1410607383 BL4S_120920142203.cfg Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 BL4S_120920142203.cfg Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 BL4S_120920142203.cfg Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 BL4S_140920141040.cfg Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263 BL4S_140920141315.cfg Pion(10GeV) Same trigger as before.
1410713390 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger Trial
1410722564 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger
1410777795 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410794919 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410864843 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
1410888987 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages still as last run)
 

DCC Calibration Runs

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410464671 BL4S_110920141315.cfg see table below see table below
1410509094 BL4S_110920141315.cfg see table below see table below
1410511254 BL4S_110920141315.cfg see table below see table below
1410515197 BL4S_110920141315.cfg see table below see table below
1410521088 BL4S_110920141315.cfg see table below see table below
1410526251 BL4S_110920141315.cfg see table below see table below
1410529431 BL4S_110920141315.cfg see table below see table below
1410531716 BL4S_110920141315.cfg see table below see table below
1410533293 BL4S_110920141315.cfg see table below see table below
1410541155 BL4S_110920141315.cfg see table below see table below
1410544349 BL4S_110920141315.cfg see table below see table below
1410547630 BL4S_110920141315.cfg see table below see table below
1410548915 BL4S_110920141315.cfg see table below see table below
>
>
1410464671 BL4S_110920141315.cfg see table below see table below
1410509094 BL4S_110920141315.cfg see table below see table below
1410511254 BL4S_110920141315.cfg see table below see table below
1410515197 BL4S_110920141315.cfg see table below see table below
1410521088 BL4S_110920141315.cfg see table below see table below
1410526251 BL4S_110920141315.cfg see table below see table below
1410529431 BL4S_110920141315.cfg see table below see table below
1410531716 BL4S_110920141315.cfg see table below see table below
1410533293 BL4S_110920141315.cfg see table below see table below
1410541155 BL4S_110920141315.cfg see table below see table below
1410544349 BL4S_110920141315.cfg see table below see table below
1410547630 BL4S_110920141315.cfg see table below see table below
1410548915 BL4S_110920141315.cfg see table below see table below
 

Revision 562014-09-30 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 36 to 36
  Markus Joos: 160663
Changed:
<
<
--++ Detector Calibration Runs 11.09.2014
>
>

Detector Calibration Runs 11.09.2014

 

Run Number Config File Trigger Explanation
<!-- /editTable -->
Line: 53 to 53
 
1410460208 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG6
Changed:
<
<
1410536278 BL4S_120920141012.cfg SC0 + CH0 Run to Calibrate DWC positions, beam was 10 GeV, focused on DWC0, intensity high.
>
>
1410536278 BL4S_110920141315.cfg SC0 + CH0 Run to Calibrate DWC positions, beam was 10 GeV, focused on DWC0, intensity high.
 

Pion runs

Line: 72 to 72
 
1410777795 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410794919 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
Changed:
<
<
1410864843 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
1410888987 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages still as last run)
>
>
1410864843 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
1410888987 BL4S_160920141250.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages still as last run)
 

DCC Calibration Runs

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
a a a a
d d d d
>
>
1410464671 BL4S_110920141315.cfg see table below see table below
1410509094 BL4S_110920141315.cfg see table below see table below
1410511254 BL4S_110920141315.cfg see table below see table below
1410515197 BL4S_110920141315.cfg see table below see table below
1410521088 BL4S_110920141315.cfg see table below see table below
1410526251 BL4S_110920141315.cfg see table below see table below
1410529431 BL4S_110920141315.cfg see table below see table below
1410531716 BL4S_110920141315.cfg see table below see table below
1410533293 BL4S_110920141315.cfg see table below see table below
1410541155 BL4S_110920141315.cfg see table below see table below
1410544349 BL4S_110920141315.cfg see table below see table below
1410547630 BL4S_110920141315.cfg see table below see table below
1410548915 BL4S_110920141315.cfg see table below see table below
 

Revision 552014-09-30 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 60 to 60
 

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410551599   Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627   Pion(4GeV) Pion run.
1410607383   Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279   Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881   Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851   Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263   Pion(10GeV) Same trigger as before.
1410713390   Pion(10GeV) E-Mu Trigger Trial
1410722564   Pion(10GeV) E-Mu Trigger
1410777795   Pion(7GeV) Pion Trigger
1410794919   Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266   Pion(7GeV) Pion Trigger
1410864843   Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
>
>
1410551599 BL4S_120920142203.cfg Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 BL4S_120920142203.cfg Pion(4GeV) Pion run.
1410607383 BL4S_120920142203.cfg Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 BL4S_120920142203.cfg Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 BL4S_120920142203.cfg Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 BL4S_140920141040.cfg Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263 BL4S_140920141315.cfg Pion(10GeV) Same trigger as before.
1410713390 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger Trial
1410722564 BL4S_140920141315.cfg Pion(10GeV) E-Mu Trigger
1410777795 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410794919 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger
1410864843 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
1410888987 BL4S_150920141240.cfg Pion(7GeV) Pion Trigger (Cherenkov voltages still as last run)
 

DCC Calibration Runs

<!-- /editTable -->
Added:
>
>
Run Number Config File Trigger Explanation
a a a a
d d d d

<!-- /editTable -->
 
Blocks 16-17-18-19 Electrons Night Muons+e Pions
0.5GeV 1410533293    
1GeV 1410509094    

Revision 542014-09-29 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 59 to 59
 

Pion runs

<!-- /editTable -->
Changed:
<
<
Run Number Trigger Explanation
1410551599 Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 Pion(4GeV) Pion run.
1410607383 Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263 Pion(10GeV) Same trigger as before.
1410713390 Pion(10GeV) E-Mu Trigger Trial
1410722564 Pion(10GeV) E-Mu Trigger
1410777795 Pion(7GeV) Pion Trigger
1410794919 Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 Pion(7GeV) Pion Trigger
1410864843 Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
>
>
Run Number Config File Trigger Explanation
1410551599   Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627   Pion(4GeV) Pion run.
1410607383   Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279   Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881   Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851   Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263   Pion(10GeV) Same trigger as before.
1410713390   Pion(10GeV) E-Mu Trigger Trial
1410722564   Pion(10GeV) E-Mu Trigger
1410777795   Pion(7GeV) Pion Trigger
1410794919   Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266   Pion(7GeV) Pion Trigger
1410864843   Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
 

DCC Calibration Runs

Revision 532014-09-29 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 53 to 53
 
1410460208 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG6
Added:
>
>
1410536278 BL4S_120920141012.cfg SC0 + CH0 Run to Calibrate DWC positions, beam was 10 GeV, focused on DWC0, intensity high.
 

Pion runs

Revision 522014-09-24 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 40 to 40
 

Run Number Config File Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410420649   SC0 + Halo Left (moved in front of beam) 4GeV, Used run to focus beam, no need to analyse
1410433832   SC0 + Halo Left 4GeV, Run after installing DCC off beam axis
1410442261   SC0 + Halo Left 4GeV, Run to check DWC2 problem
1410444821   SC0 + Halo L 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410446299   SC0 + CH0 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410449833   SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410452450   CH0+SC0 and vetoed by CH1 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410454128   SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 bar, CH1: 1.2bar
1410456004   SC0 + HaloLeft 4GeV, Test Cherenkovs, CH0: 2.0 bar, CH1: 1.2bar
1410458704   CH1+SC0 (mu + e) 4 GeV, Test LG10
1410460208   CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464   CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883   CH1+SC0 (mu + e) 4 GeV, Test LG6
>
>
1410420649 BL4S_100920142001.cfg SC0 + Halo Left (moved in front of beam) 4GeV, Used run to focus beam, no need to analyse
1410433832 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run after installing DCC off beam axis
1410442261 BL4S_110920141315.cfg SC0 + Halo Left 4GeV, Run to check DWC2 problem
1410444821 BL4S_110920141315.cfg SC0 + Halo L 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410446299 BL4S_110920141315.cfg SC0 + CH0 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410449833 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410452450 BL4S_110920141315.cfg CH0+SC0 and vetoed by CH1 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410454128 BL4S_110920141315.cfg SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 bar, CH1: 1.2bar
1410456004 BL4S_110920141315.cfg SC0 + HaloLeft 4GeV, Test Cherenkovs, CH0: 2.0 bar, CH1: 1.2bar
1410458704 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG10
1410460208 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883 BL4S_110920141315.cfg CH1+SC0 (mu + e) 4 GeV, Test LG6
 

Pion runs

Revision 512014-09-24 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 36 to 36
  Markus Joos: 160663
Added:
>
>
--++ Detector Calibration Runs 11.09.2014

Run Number Config File Trigger Explanation
1410420649   SC0 + Halo Left (moved in front of beam) 4GeV, Used run to focus beam, no need to analyse
1410433832   SC0 + Halo Left 4GeV, Run after installing DCC off beam axis
1410442261   SC0 + Halo Left 4GeV, Run to check DWC2 problem
1410444821   SC0 + Halo L 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410446299   SC0 + CH0 4GeV, Test Cherenkovs, CH0: 0.5 bar, CH1: 0.5bar
1410449833   SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410452450   CH0+SC0 and vetoed by CH1 4GeV, Test Cherenkovs, CH0: 1.2 mbar, CH1: 0.5bar
1410454128   SC0 and HaloLeft 4GeV, Test Cherenkovs, CH0: 1.2 bar, CH1: 1.2bar
1410456004   SC0 + HaloLeft 4GeV, Test Cherenkovs, CH0: 2.0 bar, CH1: 1.2bar
1410458704   CH1+SC0 (mu + e) 4 GeV, Test LG10
1410460208   CH1+SC0 (mu + e) 4 GeV, Test LG9
1410461464   CH1+SC0 (mu + e) 4 GeV, Test LG5
1410462883   CH1+SC0 (mu + e) 4 GeV, Test LG6
<!-- /editTable -->
 

Pion runs

<!-- /editTable -->

Revision 502014-09-18 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 32 to 32
  Cenk Yildiz: 74948 ( +41 22 76 74948)
Changed:
<
<
Saime Gurbuz: 0076 609 96 34
>
>
Saime Gurbuz: 076 609 96 34
  Markus Joos: 160663

Revision 492014-09-16 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 49 to 49
 
1410693263 Pion(10GeV) Same trigger as before.
1410713390 Pion(10GeV) E-Mu Trigger Trial
1410722564 Pion(10GeV) E-Mu Trigger
Added:
>
>
1410777795 Pion(7GeV) Pion Trigger
1410794919 Pion(7GeV) Pion Trigger-Overnight Run (DAQ crashed at night but still some data taken)
1410856266 Pion(7GeV) Pion Trigger
1410864843 Pion(7GeV) Pion Trigger (Cherenkov voltages changed for better particle identification)
 

DCC Calibration Runs

Revision 482014-09-16 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.

Changed:
<
<

Today shifters (15.09.2014)

  Morning Afternoon Evening
Shift Leader Cenk Saime Cenk
Run Control Shifter Elli & Christodoulos Augusta & George & Kostas Rolf & Antonia
Detector Shifter Artemis & Lisa Chris & Milou Olaf & Nick & Savina
<!-- /editTable -->

(Last Day) Tomorrow shifters (16.09.2014)

>
>

(Last Day) Todays shifters (16.09.2014)

 

  Morning Afternoon Evening
<!-- /editTable -->

Revision 472014-09-15 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 14 to 14
 
Changed:
<
<

Yesterday shifters (15.09.2014)

>
>

(Last Day) Tomorrow shifters (16.09.2014)

 

  Morning Afternoon Evening
<!-- /editTable -->
Changed:
<
<
Shift Leader Saime Saime Saime
Run Control Shifter Rolf & Savina Artemis & Christodoulos Augusta & George
Detector Shifter Olaf & Nick & Antonia Elli & Lisa Chris & Kostas & Milou
>
>
Shift Leader Saime Cenk Saime
Run Control Shifter Augusta & George & Kostas Rolf & Antonia Elli & Christodoulos
Detector Shifter Chris & Milou Olaf & Nick & Savina Artemis & Lisa
 

Run Plan of the day

Revision 462014-09-15 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 21 to 22
 
Run Control Shifter Rolf & Savina Artemis & Christodoulos Augusta & George
Detector Shifter Olaf & Nick & Antonia Elli & Lisa Chris & Kostas & Milou
Deleted:
<
<
 

Run Plan of the day

Changed:
<
<
Run Plan of 12.09.2014: Calibrating Dominicus College Calorimeters
  1. [DONE rate ~200Hz] Set Beam Energy to 1GeV, trigger at electrons
  2. [DONE rate ~125Hz] Set Beam Energy to 2GeV, trigger at electrons
  3. Set Beam Energy to 4-3-2-1GeV, trigger at electrons
  4. Do a muon run
  5. Do a pion run
  6. At night, put them on top of Lead Glass, start pion decay experiment with pure pion trigger.
>
>
- Pion Experiment 7GeV
 
Added:
>
>
- Do a study with Cherenkovs
 

Known Issues

<!-- /editTable -->
Line: 152 to 147
 
  1. Lead Glass Calibration: Calibrate Lead Glass Calorimeters with pions (2-4-6 GeV).
  2. [DONE] Leave Dominicus college calorimeters in front of the beam for an overnight run.
12.09.2014 Friday
Changed:
<
<
  1. Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies.
>
>
  1. [DONE]Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies.
 13.09.2014 Saturday
Changed:
<
<
  1. Take data with "pion trigger", 1-4GeV beam
>
>
  1. [DONE]Take data with "pion trigger", 1-10GeV beam
 
  1. Study "other" triggers from scaler counts.
14.09.2014 Sunday
Changed:
<
<
  1. Try "other" triggers, 1-4GeV beam. (For electron trigger, remove DWC?)
>
>
  1. Try "other" triggers, 1-10GeV beam. (For electron trigger, remove DWC?)
 15.09.2014 Monday
Changed:
<
<
  1. Try "other" triggers, 1-4GeV beam. (For electron trigger, remove DWC?)
>
>
  1. Try "other" triggers, 1-10GeV beam. (For electron trigger, remove DWC?)
 16.09.2014 Tuesday
Changed:
<
<
  1. Try "other" triggers, 1-4GeV beam. (For electron trigger, remove DWC?)
>
>
  1. Try "other" triggers, 1-10GeV beam. (For electron trigger, remove DWC?)
 
  1. If physics program seems complete already remove detectors?
17.09.2014 Wednesday
  1. End of our beam time, remove detectors after checking with RP.

Revision 452014-09-15 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.

Changed:
<
<

Today shifters (14.09.2014)

>
>

Today shifters (15.09.2014)

 

  Morning Afternoon Evening
<!-- /editTable -->
Changed:
<
<
Shift Leader Saime Saime Saime
Run Control Shifter Rolf & Savina Artemis & Christodoulos Augusta & George
Detector Shifter Olaf & Nick & Antonia Elli & Lisa Chris & Kostas & Milou
>
>
Shift Leader Cenk Saime Cenk
Run Control Shifter Elli & Christodoulos Augusta & George & Kostas Rolf & Antonia
Detector Shifter Artemis & Lisa Chris & Milou Olaf & Nick & Savina
 
Changed:
<
<

Tomorrow shifters (15.09.2014)

>
>
 
Added:
>
>

Yesterday shifters (15.09.2014)

 
  Morning Afternoon Evening
<!-- /editTable -->
Changed:
<
<
Shift Leader Cenk Saime Cenk
Run Control Shifter Elli & Christodoulos Augusta & George & Kostas Rolf & Antonia
Detector Shifter Artemis & Lisa Chris & Milou Olaf & Nick & Savina
>
>
Shift Leader Saime Saime Saime
Run Control Shifter Rolf & Savina Artemis & Christodoulos Augusta & George
Detector Shifter Olaf & Nick & Antonia Elli & Lisa Chris & Kostas & Milou
 

Run Plan of the day

Revision 442014-09-14 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 61 to 61
 
1410616279 Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
Changed:
<
<
1410693263 Pion(10GeV) Ongoing
>
>
1410693263 Pion(10GeV) Same trigger as before.
1410713390 Pion(10GeV) E-Mu Trigger Trial
1410722564 Pion(10GeV) E-Mu Trigger
 

DCC Calibration Runs

Revision 432014-09-14 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.

Changed:
<
<

Today shifters

>
>

Today shifters (14.09.2014)

 

  Morning Afternoon Evening
<!-- /editTable -->
Changed:
<
<
Shift Leader Cenk Cenk Cenk
Run Control Shifter George & Lisa Savina & Olaf Artemis & Christodoulos & Rolf
Detector Shifter Chris & Kostas & Milou Nick & Antonia Elli & Augusta
>
>
Shift Leader Saime Saime Saime
Run Control Shifter Rolf & Savina Artemis & Christodoulos Augusta & George
Detector Shifter Olaf & Nick & Antonia Elli & Lisa Chris & Kostas & Milou
 
Changed:
<
<

Yesterday shifters

>
>

Tomorrow shifters (15.09.2014)

 

  Morning Afternoon Evening
<!-- /editTable -->
Changed:
<
<
Shift Leader Saime Cenk Saime
Run Control Shifter Elli & Lisa Chris & Kostas & Milou Olaf & Nick & Antonia
Detector Shifter Artemis & Christodoulos Augusta & George Rolf & Savina
>
>
Shift Leader Cenk Saime Cenk
Run Control Shifter Elli & Christodoulos Augusta & George & Kostas Rolf & Antonia
Detector Shifter Artemis & Lisa Chris & Milou Olaf & Nick & Savina
 

Run Plan of the day

Line: 52 to 52
 Markus Joos: 160663

Pion runs

Added:
>
>
 
Run Number Trigger Explanation
<!-- /editTable -->
Changed:
<
<
1410551599 Pion Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 Pion Pion run.
1410607383 Pion Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 Pion Added a thicker copper plate was installed behind SC0
     
>
>
1410551599 Pion(4GeV) Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 Pion(4GeV) Pion run.
1410607383 Pion(4GeV) Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 Pion(4GeV) Added a thicker copper plate was installed behind SC0
1410631881 Pion(4GeV) Overnight run: Pion run with CH1 at 1.4bar
1410687851 Pion(10GeV) First 10GeV Run CH0:1.2 CH1:0.23
1410693263 Pion(10GeV) Ongoing
 

DCC Calibration Runs

Revision 422014-09-13 - CharlesTimmermans

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 65 to 65
 

DCC Calibration Runs

<!-- /editTable -->
Changed:
<
<
Blocks 16-17-18-19 Electrons Muons Pions
>
>
Blocks 16-17-18-19 Electrons Night Muons+e Pions
 
0.5GeV 1410533293    
1GeV 1410509094    
2GeV 1410511254    
3GeV 1410515197    
Changed:
<
<
4GeV 1410541155    
>
>
4GeV 1410541155 1410464671  
 

Blocks 20-21-22-23 Electrons Muons Pions
<!-- /editTable -->
Line: 78 to 78
 
1GeV 1410529431    
2GeV 1410526251    
3GeV 1410521088    
Changed:
<
<
4GeV 1410544349    
>
>
4GeV 1410544349 1410547630 1410548915
 

BL4S weekly Shift Plan

Revision 412014-09-13 - NikolaosPlaskovitis

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 56 to 56
 
Run Number Trigger Explanation
1410551599 Pion Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 Pion Pion run.
Changed:
<
<
     
     
>
>
1410607383 Pion Pion run with 0.5mm Cu-sheet in front of DWC1
1410616279 Pion Added a thicker copper plate was installed behind SC0
 
     

Revision 402014-09-13 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 51 to 51
  Markus Joos: 160663
Added:
>
>

Pion runs

Run Number Trigger Explanation
1410551599 Pion Overnight run with pion trigger. Started with hadron target. Around 11 in the night the target was changed back to electron rich target
1410597627 Pion Pion run.
     
     
     
<!-- /editTable -->

 

DCC Calibration Runs

<!-- /editTable -->

Revision 392014-09-13 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.

Deleted:
<
<

Todays shifters

 
Changed:
<
<
  Morning Afternoon Evening
Shift Leader Saime Cenk Saime
Run Control Shifter Elli & Lisa Chris & Kostas & Milou Olaf & Nick & Antonia
Detector Shifter Artemis & Christodoulos Augusta & George Rolf & Savina
<!-- /editTable -->

Tomorrow shifters

>
>

Today shifters

 

  Morning Afternoon Evening
<!-- /editTable -->
Line: 21 to 13
 
Run Control Shifter George & Lisa Savina & Olaf Artemis & Christodoulos & Rolf
Detector Shifter Chris & Kostas & Milou Nick & Antonia Elli & Augusta
Added:
>
>

Yesterday shifters

  Morning Afternoon Evening
Shift Leader Saime Cenk Saime
Run Control Shifter Elli & Lisa Chris & Kostas & Milou Olaf & Nick & Antonia
Detector Shifter Artemis & Christodoulos Augusta & George Rolf & Savina
<!-- /editTable -->
 

Run Plan of the day

Run Plan of 12.09.2014: Calibrating Dominicus College Calorimeters

Revision 382014-09-12 - CharlesTimmermans

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 54 to 54
 

Blocks 16-17-18-19 Electrons Muons Pions
<!-- /editTable -->
Changed:
<
<
0.5GeV      
>
>
0.5GeV 1410533293    
 
1GeV 1410509094    
2GeV 1410511254    
3GeV 1410515197    
Changed:
<
<
4GeV      
>
>
4GeV 1410541155    
 
Line: 68 to 68
 
1GeV 1410529431    
2GeV 1410526251    
3GeV 1410521088    
Changed:
<
<
4GeV      
>
>
4GeV 1410544349    
 

BL4S weekly Shift Plan

Revision 372014-09-12 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 26 to 26
 Run Plan of 12.09.2014: Calibrating Dominicus College Calorimeters
  1. [DONE rate ~200Hz] Set Beam Energy to 1GeV, trigger at electrons
  2. [DONE rate ~125Hz] Set Beam Energy to 2GeV, trigger at electrons
Changed:
<
<
  1. Set Beam Energy to 4GeV, trigger at electrons
>
>
  1. Set Beam Energy to 4-3-2-1GeV, trigger at electrons
 
  1. Do a muon run
  2. Do a pion run
  3. At night, put them on top of Lead Glass, start pion decay experiment with pure pion trigger.
Line: 54 to 54
 

Blocks 16-17-18-19 Electrons Muons Pions
<!-- /editTable -->
Added:
>
>
0.5GeV      
 
1GeV 1410509094    
2GeV 1410511254    
3GeV 1410515197    
Line: 59 to 60
 
3GeV 1410515197    
4GeV      
Added:
>
>
 
Blocks 20-21-22-23 Electrons Muons Pions
<!-- /editTable -->
Changed:
<
<
1GeV      
>
>
0.5GeV 1410531716    
1GeV 1410529431    
 
2GeV 1410526251    
3GeV 1410521088    
4GeV      

Revision 362014-09-12 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 13 to 13
 
Run Control Shifter Elli & Lisa Chris & Kostas & Milou Olaf & Nick & Antonia
Detector Shifter Artemis & Christodoulos Augusta & George Rolf & Savina
Added:
>
>

Tomorrow shifters

  Morning Afternoon Evening
Shift Leader Cenk Cenk Cenk
Run Control Shifter George & Lisa Savina & Olaf Artemis & Christodoulos & Rolf
Detector Shifter Chris & Kostas & Milou Nick & Antonia Elli & Augusta
<!-- /editTable -->
 

Run Plan of the day

Run Plan of 12.09.2014: Calibrating Dominicus College Calorimeters

Revision 352014-09-12 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 54 to 54
 
Blocks 20-21-22-23 Electrons Muons Pions
1GeV      
<!-- /editTable -->
Changed:
<
<
2GeV      
>
>
2GeV 1410526251    
 
3GeV 1410521088    
4GeV      

Revision 342014-09-12 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 10 to 10
 
  Morning Afternoon Evening
Shift Leader Saime Cenk Saime
<!-- /editTable -->
Changed:
<
<
Run Control Shifter Savina & Olaf Elli & Lisa Chris & George & Milou
Detector Shifter Antonia & Rolf & Nick Artemis & Christodoulos Kostas & Augusta
>
>
Run Control Shifter Elli & Lisa Chris & Kostas & Milou Olaf & Nick & Antonia
Detector Shifter Artemis & Christodoulos Augusta & George Rolf & Savina
 

Run Plan of the day

Revision 332014-09-12 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 55 to 55
 
Blocks 20-21-22-23 Electrons Muons Pions
1GeV      
2GeV      
Changed:
<
<
3GeV      
>
>
3GeV 1410521088    
 
4GeV      

Revision 322014-09-12 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 10 to 10
 
  Morning Afternoon Evening
Shift Leader Saime Cenk Saime
<!-- /editTable -->
Changed:
<
<
Run Control Shifter Elli & Lisa Chris & George & Milou Savina & Olaf
Detector Shifter Artemis & Christodoulos Kostas & Augusta Antonia & Rolf & Nick
>
>
Run Control Shifter Savina & Olaf Elli & Lisa Chris & George & Milou
Detector Shifter Antonia & Rolf & Nick Artemis & Christodoulos Kostas & Augusta
 

Run Plan of the day

Changed:
<
<
Run Plan of 12.09.2014: Calibrating Dominicus College Calorimeters
  1. Set Beam Energy to 1GeV, trigger at electrons
  2. Set Beam Energy to 2GeV, trigger at electrons
>
>
Run Plan of 12.09.2014: Calibrating Dominicus College Calorimeters
  1. [DONE rate ~200Hz] Set Beam Energy to 1GeV, trigger at electrons
  2. [DONE rate ~125Hz] Set Beam Energy to 2GeV, trigger at electrons
 
  1. Set Beam Energy to 4GeV, trigger at electrons
  2. Do a muon run
  3. Do a pion run
Line: 43 to 42
  Markus Joos: 160663
Added:
>
>

DCC Calibration Runs

Blocks 16-17-18-19 Electrons Muons Pions
1GeV 1410509094    
2GeV 1410511254    
3GeV 1410515197    
4GeV      
<!-- /editTable -->

Blocks 20-21-22-23 Electrons Muons Pions
1GeV      
2GeV      
3GeV      
4GeV      
<!-- /editTable -->
 

BL4S weekly Shift Plan

Shift Leader

Revision 312014-09-12 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 10 to 10
 
  Morning Afternoon Evening
Shift Leader Saime Cenk Saime
<!-- /editTable -->
Changed:
<
<
Run Control Shifter Savina & Olaf Elli & Artemis Chris & George & Milou
Detector Shifter Antonia & Rolf & Nick Lisa & Christodoulos Kostas & Augusta
>
>
Run Control Shifter Elli & Lisa Chris & George & Milou Savina & Olaf
Detector Shifter Artemis & Christodoulos Kostas & Augusta Antonia & Rolf & Nick
 

Run Plan of the day

Changed:
<
<
Run Plan of 11.09.2014:
>
>
Run Plan of 12.09.2014: Calibrating Dominicus College Calorimeters
  1. Set Beam Energy to 1GeV, trigger at electrons
  2. Set Beam Energy to 2GeV, trigger at electrons
  3. Set Beam Energy to 4GeV, trigger at electrons
  4. Do a muon run
  5. Do a pion run
  6. At night, put them on top of Lead Glass, start pion decay experiment with pure pion trigger.
 

Known Issues

Revision 302014-09-12 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 9 to 9
 

  Morning Afternoon Evening
<!-- /editTable -->
Changed:
<
<
Shift Leader Cenk Y. Saime G. Cenk Y.
Run Control Shifter Nick & Antonia & Olaf Elli & Lisa Chris & Kostas & Milou
Detector Shifter Savina & Rolf Artemis & Christodoulos George & Augusta
>
>
Shift Leader Saime Cenk Saime
Run Control Shifter Savina & Olaf Elli & Artemis Chris & George & Milou
Detector Shifter Antonia & Rolf & Nick Lisa & Christodoulos Kostas & Augusta
 

Run Plan of the day

Run Plan of 11.09.2014:

Changed:
<
<
  1. [DONE] Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV.
  2. [DONE] Install Dominicus College Calorimeters.
  3. [DONE] Check signals from them with muons.
  4. [DONE] Check position of each detector, create a new geometry configuration.
  5. Check signals from all scintillators, try to see if there are noisy ones.
  6. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
    1. [DONE] Set CH0 and CH1 to accept electrons
    2. [DONE] Set CH1 to accept muons too, keep CH0 as before
    3. Set CH0 and CH1 to accept muons and electrons
    4. Set CH1 to accept pions too, keep CH0 as before
  7. Lead Glass Calibration: with the electron beam at various energies (2-4-6 GeV) for central 4 Lead Glass.
  8. Lead Glass Calibration: Calibrate Lead Glass Calorimeters with pions (2-4-6 GeV).
  9. Start Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at 2-4-6 GeV.
>
>
 

Known Issues

Line: 99 to 87
 
  1. Check signals, delays etc.
  2. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
  3. Students will have lectures, visits. (We probably are not involved)
Changed:
<
<
  1. Calibrate DWC with fake signals.
>
>
  1. [DONE]Calibrate DWC with fake signals.
 10.09.2014 Wednesday NO beam this day!
  1. Introduction to Beamline(Lau) (Two sessions for two groups, morning + afternoon 2h each)
  2. Introduction to BL4S Detector/DAQ System and Shifter Training (Two sessions for two groups, morning + afternoon 2h each)
  3. Patron training with Lau for Cenk, Saime and Markus.
11.09.2014 Thursday
Changed:
<
<
  1. Install Dominicus College Calorimeters, in parallel check signals from all detectors.
  2. Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV. Steer the beam at center of detector.
  3. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
    1. Set CH0 and CH1 to accept electrons
    2. Set CH1 to accept muons too, keep CH0 as before
    3. Set CH0 and CH1 to accept muons and electrons
    4. Set CH1 to accept pions too, keep CH0 as before
  4. Lead Glass Calibration: with the electron beam at various energies (2-4-6 GeV) for central 4 Lead Glass.
>
>
  1. [DONE] Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV.
  2. [DONE] Install Dominicus College Calorimeters.
  3. [DONE] Check signals from them with muons.
  4. [DONE] Check position of each detector, create a new geometry configuration.
  5. [DONE]Check signals from all scintillators, try to see if there are noisy ones. Halo Right is noisy, can be changed.
  6. [DONE]Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
    1. [DONE] Set CH0 and CH1 to accept electrons
    2. [DONE] Set CH1 to accept muons too, keep CH0 as before
    3. [DONE] Set CH0 and CH1 to accept muons and electrons
    4. [DONE] Set CH1 to accept pions too, keep CH0 as before
  7. [DONE]Lead Glass Calibration: with the electron beam at 4GeV for central 4 Lead Glass. (Could not do other energies)
 
  1. Lead Glass Calibration: Calibrate Lead Glass Calorimeters with pions (2-4-6 GeV).
Changed:
<
<
  1. Start Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at 2-4-6 GeV.
>
>
  1. [DONE] Leave Dominicus college calorimeters in front of the beam for an overnight run.
 12.09.2014 Friday
Changed:
<
<
  1. Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies
>
>
  1. Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies.
 13.09.2014 Saturday
  1. Take data with "pion trigger", 1-4GeV beam
  2. Study "other" triggers from scaler counts.

Revision 292014-09-11 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 22 to 22
 
  1. [DONE] Check position of each detector, create a new geometry configuration.
  2. Check signals from all scintillators, try to see if there are noisy ones.
  3. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
Changed:
<
<
    1. Set CH0 and CH1 to accept electrons
    2. Set CH1 to accept muons too, keep CH0 as before
>
>
    1. [DONE] Set CH0 and CH1 to accept electrons
    2. [DONE] Set CH1 to accept muons too, keep CH0 as before
 
    1. Set CH0 and CH1 to accept muons and electrons
    2. Set CH1 to accept pions too, keep CH0 as before
  1. Lead Glass Calibration: with the electron beam at various energies (2-4-6 GeV) for central 4 Lead Glass.
Line: 35 to 35
 
ERORR TYPE THE MESSAGE WHAT TO DO
CHIP error on ERS 16:00:44 ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Stopless removal: Failed to reset the ResInfoProvider after stop of run. Ignore
<!-- /editTable -->
Changed:
<
<
     
     
>
>
DWC2 OH counts on OH Display counts of the DWC2 is ~10 times lower than others Check the cables
CHIP Error ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Test failure for application: BL4SApp , result: FAILED Immediately tell shift leader
 
     

Mesage Board

Revision 282014-09-11 - AugustaVanHaren

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 11 to 11
 
  Morning Afternoon Evening
Shift Leader Cenk Y. Saime G. Cenk Y.
Run Control Shifter Nick & Antonia & Olaf Elli & Lisa Chris & Kostas & Milou
Changed:
<
<
Detector Shifter Savina & Rolf Artemis & Christodoulos George & Augustus
>
>
Detector Shifter Savina & Rolf Artemis & Christodoulos George & Augusta
 

Run Plan of the day

Revision 272014-09-11 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 16 to 16
 

Run Plan of the day

Run Plan of 11.09.2014:

Changed:
<
<
  1. Install Dominicus College Calorimeters. In parallel
    1. Check signals from all detectors.
    2. Check position of each detector, create a new geometry configuration.
  2. Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV. Steer the beam at center of detector.
>
>
  1. [DONE] Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV.
  2. [DONE] Install Dominicus College Calorimeters.
  3. [DONE] Check signals from them with muons.
  4. [DONE] Check position of each detector, create a new geometry configuration.
  5. Check signals from all scintillators, try to see if there are noisy ones.
 
  1. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
    1. Set CH0 and CH1 to accept electrons
    2. Set CH1 to accept muons too, keep CH0 as before

Revision 262014-09-11 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 74 to 74
 
  Morning Afternoon Evening
10.09.2014 No Beam No Beam No Beam
11.09.2014 G1 G2 G3
Changed:
<
<
12.09.2014 G2 G3 G2
13.09.2014 G3 G1 G1
14.09.2014 G1 G2 G2
15.09.2014 G2 G3 G3
16.09.2014 G3 G1 G1
>
>
12.09.2014 G2 G3 G1
13.09.2014 G3 G1 G2
14.09.2014 G1 G2 G3
15.09.2014 G2 G3 G1
16.09.2014 G3 G1 G2
  Group Members:

Revision 252014-09-10 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 16 to 16
 

Run Plan of the day

Run Plan of 11.09.2014:

Changed:
<
<
  1. Install Dominicus College Calorimeters, in parallel check signals from all detectors.
>
>
  1. Install Dominicus College Calorimeters. In parallel
    1. Check signals from all detectors.
    2. Check position of each detector, create a new geometry configuration.
 
  1. Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV. Steer the beam at center of detector.
  2. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
    1. Set CH0 and CH1 to accept electrons

Revision 242014-09-10 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 10 to 10
 
  Morning Afternoon Evening
Shift Leader Cenk Y. Saime G. Cenk Y.
<!-- /editTable -->
Changed:
<
<
Run Control Shifter G1 G2 G3
Detector Shifter G1 G2 G3
>
>
Run Control Shifter Nick & Antonia & Olaf Elli & Lisa Chris & Kostas & Milou
Detector Shifter Savina & Rolf Artemis & Christodoulos George & Augustus
 

Run Plan of the day

Line: 80 to 80
  Group Members:
Changed:
<
<
G1          
G2          
G3          
           
>
>
G1 Nick Antonia Savina Olaf Rolf
G2 Elli Artemis Lisa Christodoulos  
G3 Chris Kostas Milou George Augustus
 

Online Histograms for Detector and DAQ Shifter

Revision 232014-09-10 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 15 to 15
 

Run Plan of the day

Changed:
<
<
Run Plan of 1x.09.2014:
>
>
Run Plan of 11.09.2014:
  1. Install Dominicus College Calorimeters, in parallel check signals from all detectors.
  2. Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV. Steer the beam at center of detector.
  3. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
    1. Set CH0 and CH1 to accept electrons
    2. Set CH1 to accept muons too, keep CH0 as before
    3. Set CH0 and CH1 to accept muons and electrons
    4. Set CH1 to accept pions too, keep CH0 as before
  4. Lead Glass Calibration: with the electron beam at various energies (2-4-6 GeV) for central 4 Lead Glass.
  5. Lead Glass Calibration: Calibrate Lead Glass Calorimeters with pions (2-4-6 GeV).
  6. Start Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at 2-4-6 GeV.
 
Deleted:
<
<
The DWCs will be calibrated in the morning then then physics data will be taken!
 

Known Issues

<!-- /editTable -->
Line: 91 to 100
 10.09.2014 Wednesday NO beam this day!
  1. Introduction to Beamline(Lau) (Two sessions for two groups, morning + afternoon 2h each)
  2. Introduction to BL4S Detector/DAQ System and Shifter Training (Two sessions for two groups, morning + afternoon 2h each)
Changed:
<
<
  1. Installation of Dominicus College Calorimeters
  2. Finalizing installation with students.
  3. Patron training with Lau?
>
>
  1. Patron training with Lau for Cenk, Saime and Markus.
 11.09.2014 Thursday
Changed:
<
<
  1. Focus the beam at downstream DWC, set energy, record magnet parameters for few energies. Steer the beam at center of detector.
>
>
  1. Install Dominicus College Calorimeters, in parallel check signals from all detectors.
  2. Focus the beam at downstream DWC, record magnet parameters 2-4-6 GeV. Steer the beam at center of detector.
 
  1. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
Changed:
<
<
    1. Set CH0 and 1 to accept electrons
    2. Set CH1 to accept muons too, keep CH0 same
    3. Set CH0 and 1 to accept muons and electrons
    4. Set CH1 to accept pions too, keep CH0 same
  1. Lead Glass Calibration with the electron beam at various energies for each Lead Glass.
  2. Start Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies
>
>
    1. Set CH0 and CH1 to accept electrons
    2. Set CH1 to accept muons too, keep CH0 as before
    3. Set CH0 and CH1 to accept muons and electrons
    4. Set CH1 to accept pions too, keep CH0 as before
  1. Lead Glass Calibration: with the electron beam at various energies (2-4-6 GeV) for central 4 Lead Glass.
  2. Lead Glass Calibration: Calibrate Lead Glass Calorimeters with pions (2-4-6 GeV).
  3. Start Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at 2-4-6 GeV.
 12.09.2014 Friday
  1. Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies
13.09.2014 Saturday

Revision 222014-09-09 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 95 to 95
 
  1. Finalizing installation with students.
  2. Patron training with Lau?
11.09.2014 Thursday
Changed:
<
<
  1. Focus the beam at downstream DWC, set energy, record magnet parameters for few energies.
  2. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  3. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  4. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
  5. Lead Glass Calibration with the electron beam at various energies for each Lead Glass. ( DON'T FORGET TO CHANGE LEAD GLASS CALIBRATION CONSTANTS!)
  6. Calibration of Dominicus College Calorimeters with electron beam at various energies + hadrons + muons.
>
>
  1. Focus the beam at downstream DWC, set energy, record magnet parameters for few energies. Steer the beam at center of detector.
  2. Cherenkov tests: Take trigger from SC0 and Halo LEFT (moved in front of beam)
    1. Set CH0 and 1 to accept electrons
    2. Set CH1 to accept muons too, keep CH0 same
    3. Set CH0 and 1 to accept muons and electrons
    4. Set CH1 to accept pions too, keep CH0 same
  3. Lead Glass Calibration with the electron beam at various energies for each Lead Glass.
  4. Start Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies
 12.09.2014 Friday
Changed:
<
<
  1. Take data with "pion trigger", 1-4GeV beam
  2. Study "other" triggers from scaler counts.
>
>
  1. Calibration of Dominicus College Calorimeters with electron + hadron + muon beam at various energies
 13.09.2014 Saturday
  1. Take data with "pion trigger", 1-4GeV beam
  2. Study "other" triggers from scaler counts.
Deleted:
<
<
  1. Maybe already switch to other triggers
 14.09.2014 Sunday
  1. Try "other" triggers, 1-4GeV beam. (For electron trigger, remove DWC?)
15.09.2014 Monday

Revision 212014-09-09 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 81 to 81
 

Run Plan of the week

08.09.2014 Monday

Changed:
<
<
  1. Patron training with Lau.
  2. Check signals, delays etc.
  3. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
>
>
1 Install the experimental Setup
 
  1. Install Webcam PC's (multiplugs and extension cables)
09.09.2014 Tuesday
Added:
>
>
  1. Check signals, delays etc.
  2. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
 
  1. Students will have lectures, visits. (We probably are not involved)
Deleted:
<
<
  1. Focus the beam at downstream DWC, set energy, record magnet parameters for few energies.
  2. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  3. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  4. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
  5. Lead Glass Calibration with the electron beam at various energies for each Lead Glass. ( DON'T FORGET TO CHANGE LEAD GLASS CALIBRATION CONSTANTS!)
 
  1. Calibrate DWC with fake signals.
Deleted:
<
<
  1. Calibrate DWC with focusing beam in front of it. (?)
 10.09.2014 Wednesday NO beam this day!
  1. Introduction to Beamline(Lau) (Two sessions for two groups, morning + afternoon 2h each)
  2. Introduction to BL4S Detector/DAQ System and Shifter Training (Two sessions for two groups, morning + afternoon 2h each)
  3. Installation of Dominicus College Calorimeters
  4. Finalizing installation with students.
Added:
>
>
  1. Patron training with Lau?
 11.09.2014 Thursday
Added:
>
>
  1. Focus the beam at downstream DWC, set energy, record magnet parameters for few energies.
  2. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  3. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  4. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
  5. Lead Glass Calibration with the electron beam at various energies for each Lead Glass. ( DON'T FORGET TO CHANGE LEAD GLASS CALIBRATION CONSTANTS!)
 
  1. Calibration of Dominicus College Calorimeters with electron beam at various energies + hadrons + muons.
12.09.2014 Friday
  1. Take data with "pion trigger", 1-4GeV beam

Revision 202014-09-09 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 53 to 53
 
  Morning Afternoon Evening
10.09.2014 No Beam No Beam No Beam
11.09.2014 G1 G2 G3
Changed:
<
<
12.09.2014 G4 G1 G2
13.09.2014 G3 G4 G1
14.09.2014 G2 G3 G4
15.09.2014 G1 G2 G3
16.09.2014 G4 G1 G2
>
>
12.09.2014 G2 G3 G1
13.09.2014 G3 G1 G2
14.09.2014 G1 G2 G3
15.09.2014 G2 G3 G1
16.09.2014 G3 G1 G2
 
Detector And DAQ Shifter
  Morning Afternoon Evening
10.09.2014 No Beam No Beam No Beam
11.09.2014 G1 G2 G3
Changed:
<
<
12.09.2014 G4 G1 G2
13.09.2014 G3 G4 G1
14.09.2014 G2 G3 G4
15.09.2014 G1 G2 G3
16.09.2014 G4 G1 G2
>
>
12.09.2014 G2 G3 G2
13.09.2014 G3 G1 G1
14.09.2014 G1 G2 G2
15.09.2014 G2 G3 G3
16.09.2014 G3 G1 G1
  Group Members:
Changed:
<
<
G1 Andreas Valadakis Georgios Bantis Konstantinos Papathanasiou Milou Engelen Augusta Van Haren
G2 Ilias Verginis Elli Chroni Nikolaos Plaskovitis Olaf Rutger Leenders Rolf Henri Bernard Van Kleef
G3 Rachel Crane Christos Koutsoulas Artemis Potamianou Lisa Biesot  
G4 Charles Timmermans Christodoulos Liapis Raikakos Antonia Sotiropoulou Savina Tsichli  
>
>
G1          
G2          
G3          
           
 

Online Histograms for Detector and DAQ Shifter

Revision 192014-09-09 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 69 to 69
 
15.09.2014 G1 G2 G3
16.09.2014 G4 G1 G2
Changed:
<
<
Group Memebers: (will be decided soon!)
>
>
Group Members:
 
Changed:
<
<
G1        
G2        
G3        
G4        
<!-- /editTable -->
>
>
G1 Andreas Valadakis Georgios Bantis Konstantinos Papathanasiou Milou Engelen Augusta Van Haren
G2 Ilias Verginis Elli Chroni Nikolaos Plaskovitis Olaf Rutger Leenders Rolf Henri Bernard Van Kleef
G3 Rachel Crane Christos Koutsoulas Artemis Potamianou Lisa Biesot  
G4 Charles Timmermans Christodoulos Liapis Raikakos Antonia Sotiropoulou Savina Tsichli  
 

Online Histograms for Detector and DAQ Shifter

Revision 182014-09-07 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 81 to 81
 

Run Plan of the week

Deleted:
<
<
04.09.2014 Thursday
 
Deleted:
<
<
05.09.2014 Friday
  1. Move detectors into the barracks.
  2. Test Network connection of the PC's in main control room.
07.09.2014
  1. Move PC's from the network database (bl4sdaq, bl4shv, bl4sdaq1, bl4sdaq2, lnxpool41, lnxpool46, pcbl4sstudents1, pcbl4sstudents2)
 08.09.2014 Monday
  1. Patron training with Lau.
  2. Check signals, delays etc.

Revision 172014-09-04 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 82 to 82
 

Run Plan of the week

04.09.2014 Thursday

Changed:
<
<
  1. Move PC's to control room (If Insulab allows us)
  2. Move PC's from the network database (bl4sdaq, bl4shv, bl4sdaqclone, lnxpool41, lnxpool46 + new computers)
>
>
 05.09.2014 Friday
  1. Move detectors into the barracks.
  2. Test Network connection of the PC's in main control room.
Added:
>
>
07.09.2014
  1. Move PC's from the network database (bl4sdaq, bl4shv, bl4sdaq1, bl4sdaq2, lnxpool41, lnxpool46, pcbl4sstudents1, pcbl4sstudents2)
 08.09.2014 Monday
Deleted:
<
<
  1. Install cables, detectors, PC's. Keep DWC1 & DWC2 out of beam axis.
 
  1. Patron training with Lau.
  2. Check signals, delays etc.
  3. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
  4. Install Webcam PC's (multiplugs and extension cables)
09.09.2014 Tuesday
  1. Students will have lectures, visits. (We probably are not involved)
Added:
>
>
  1. Focus the beam at downstream DWC, set energy, record magnet parameters for few energies.
 
  1. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  2. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  3. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.

Revision 162014-09-04 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 104 to 104
 10.09.2014 Wednesday NO beam this day!
  1. Introduction to Beamline(Lau) (Two sessions for two groups, morning + afternoon 2h each)
  2. Introduction to BL4S Detector/DAQ System and Shifter Training (Two sessions for two groups, morning + afternoon 2h each)
Deleted:
<
<
  1. Shift Training
 
  1. Installation of Dominicus College Calorimeters
  2. Finalizing installation with students.
11.09.2014 Thursday

Revision 152014-09-02 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 10 to 10
 
  Morning Afternoon Evening
Shift Leader Cenk Y. Saime G. Cenk Y.
<!-- /editTable -->
Changed:
<
<
Run Control Shifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
Detector Shifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
>
>
Run Control Shifter G1 G2 G3
Detector Shifter G1 G2 G3
 
Changed:
<
<

Run Plan

>
>

Run Plan of the day

  Run Plan of 1x.09.2014:
Line: 28 to 28
 
     

Mesage Board

Changed:
<
<
Ignore the DWC and Scintillator Histograms during Lead Glass Calibration
>
>
Ignore the DWC and Scintillator Histograms during Lead Glass Calibration.
 

On Call Experts

Cenk Yildiz: 74948 ( +41 22 76 74948)

Changed:
<
<
Saime Gurbuz: 0076
>
>
Saime Gurbuz: 0076 609 96 34
  Markus Joos: 160663
Line: 70 to 69
 
15.09.2014 G1 G2 G3
16.09.2014 G4 G1 G2
Added:
>
>
Group Memebers: (will be decided soon!)

G1        
G2        
G3        
G4        
<!-- /editTable -->
 

Online Histograms for Detector and DAQ Shifter

Changed:
<
<

Run Plan

>
>

Run Plan of the week

  04.09.2014 Thursday
  1. Move PC's to control room (If Insulab allows us)
Line: 94 to 101
 
  1. Lead Glass Calibration with the electron beam at various energies for each Lead Glass. (DON'T FORGET TO CHANGE LEAD GLASS CALIBRATION CONSTANTS!)
  2. Calibrate DWC with fake signals.
  3. Calibrate DWC with focusing beam in front of it. (?)
Changed:
<
<
10.09.2014 Wednesday NO beam this day!
>
>
10.09.2014 Wednesday NO beam this day!
 
  1. Introduction to Beamline(Lau) (Two sessions for two groups, morning + afternoon 2h each)
  2. Introduction to BL4S Detector/DAQ System and Shifter Training (Two sessions for two groups, morning + afternoon 2h each)
  3. Shift Training

Revision 142014-09-02 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 11 to 11
 
  Morning Afternoon Evening
Shift Leader Cenk Y. Saime G. Cenk Y.
Run Control Shifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
Changed:
<
<
Detector and DAQ Sfifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
>
>
Detector Shifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
 

Run Plan

Line: 41 to 41
 
Shift Leader
  Morning Afternoon Evening
Changed:
<
<
10.09.2014 Cenk Y. Saime G. Cenk Y.
11.09.2014 Saime G. Markus J. Christoph R.
12.09.2014      
13.09.2014      
14.09.2014      
15.09.2014      
16.09.2014      
17.09.2014      
>
>
10.09.2014 No Beam No Beam No Beam
11.09.2014 Cenk Y. Saime G. Cenk Y.
12.09.2014 Saime G. Cenk Y. Saime G.
13.09.2014 Cenk Y. Saime G. Cenk Y.
14.09.2014 Saime G. Cenk Y. Saime G.
15.09.2014 Cenk Y. Saime G. Cenk Y.
16.09.2014 Saime G. Cenk Y. Saime G.
 
Run Control Shifter
  Morning Afternoon Evening
Changed:
<
<
10.09.2014 Marie K. & James M. Marie K. & James M. Marie K. & James M.
11.09.2014 Marie K. & James M. Marie K. & James M. Marie K. & James M.
12.09.2014      
13.09.2014      
14.09.2014      
15.09.2014      
16.09.2014      
17.09.2014      
>
>
10.09.2014 No Beam No Beam No Beam
11.09.2014 G1 G2 G3
12.09.2014 G4 G1 G2
13.09.2014 G3 G4 G1
14.09.2014 G2 G3 G4
15.09.2014 G1 G2 G3
16.09.2014 G4 G1 G2
 
Detector And DAQ Shifter
  Morning Afternoon Evening
Changed:
<
<
10.09.2014 Marie K. & James M. Marie K. & James M. Marie K. & James M.
11.09.2014      
12.09.2014      
13.09.2014      
14.09.2014      
15.09.2014      
16.09.2014      
17.09.2014      
>
>
10.09.2014 No Beam No Beam No Beam
11.09.2014 G1 G2 G3
12.09.2014 G4 G1 G2
13.09.2014 G3 G4 G1
14.09.2014 G2 G3 G4
15.09.2014 G1 G2 G3
16.09.2014 G4 G1 G2
 

Online Histograms for Detector and DAQ Shifter

Line: 123 to 121
 
  1. End of our beam time, remove detectors after checking with RP.
  2. Close out session
Deleted:
<
<
Questions:
  • Safety training for Cenk & Saime?
 

Useful Links

Revision 132014-08-27 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 84 to 84
 
  1. Test Network connection of the PC's in main control room.
08.09.2014 Monday
  1. Install cables, detectors, PC's. Keep DWC1 & DWC2 out of beam axis.
Added:
>
>
  1. Patron training with Lau.
 
  1. Check signals, delays etc.
  2. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
  3. Install Webcam PC's (multiplugs and extension cables)
09.09.2014 Tuesday
Added:
>
>
  1. Students will have lectures, visits. (We probably are not involved)
 
  1. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  2. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  3. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
Line: 95 to 97
 
  1. Calibrate DWC with fake signals.
  2. Calibrate DWC with focusing beam in front of it. (?)
10.09.2014 Wednesday
Changed:
<
<
  1. Introduction to Beamline
>
>
NO beam this day!
  1. Introduction to Beamline(Lau) (Two sessions for two groups, morning + afternoon 2h each)
  2. Introduction to BL4S Detector/DAQ System and Shifter Training (Two sessions for two groups, morning + afternoon 2h each)
 
  1. Shift Training
  2. Installation of Dominicus College Calorimeters
  3. Finalizing installation with students.
11.09.2014 Thursday
  1. Calibration of Dominicus College Calorimeters with electron beam at various energies + hadrons + muons.
12.09.2014 Friday
Changed:
<
<
  1. Take data with "pion trigger", 4GeV beam
>
>
  1. Take data with "pion trigger", 1-4GeV beam
 
  1. Study "other" triggers from scaler counts.
13.09.2014 Saturday
Changed:
<
<
  1. Take data with "pion trigger", 4GeV beam
>
>
  1. Take data with "pion trigger", 1-4GeV beam
 
  1. Study "other" triggers from scaler counts.
Added:
>
>
  1. Maybe already switch to other triggers
 14.09.2014 Sunday
Changed:
<
<
  1. Try "other" triggers, 4GeV beam. (For electron trigger, remove DWC?)
>
>
  1. Try "other" triggers, 1-4GeV beam. (For electron trigger, remove DWC?)
 15.09.2014 Monday
Changed:
<
<
  1. Take data removing last DWC?
>
>
  1. Try "other" triggers, 1-4GeV beam. (For electron trigger, remove DWC?)
 16.09.2014 Tuesday
Added:
>
>
  1. Try "other" triggers, 1-4GeV beam. (For electron trigger, remove DWC?)
  2. If physics program seems complete already remove detectors?
17.09.2014 Wednesday
  1. End of our beam time, remove detectors after checking with RP.
  2. Close out session
  Questions:
  • Safety training for Cenk & Saime?

Revision 122014-08-26 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 91 to 91
 
  1. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  2. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  3. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
Changed:
<
<
  1. Lead Glass Calibration with the electron beam at various energies for each Lead Glass.
>
>
  1. Lead Glass Calibration with the electron beam at various energies for each Lead Glass. (DON'T FORGET TO CHANGE LEAD GLASS CALIBRATION CONSTANTS!)
 
  1. Calibrate DWC with fake signals.
  2. Calibrate DWC with focusing beam in front of it. (?)
10.09.2014 Wednesday

Revision 112014-08-26 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 113 to 113
 
  1. Take data removing last DWC?
16.09.2014 Tuesday
Added:
>
>
Questions:
  • Safety training for Cenk & Saime?
 

Useful Links

Changed:
<
<
>
>
 -- SaimeSarikaya - 12 Aug 2014 -- CenkYildiz - 22 Aug 2014

Revision 102014-08-25 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 35 to 37
  Markus Joos: 160663
Changed:
<
<

BL4S Shift Plan

>
>

BL4S weekly Shift Plan

 
Shift Leader
  Morning Afternoon Evening
Line: 76 to 77
 

Run Plan

04.09.2014 Thursday

Changed:
<
<
  1. Move PC's to control room (If Insulab allows us)
  2. Move PC's from the network database (bl4sdaq, bl4shv, bl4sdaqclone, lnxpool41, lnxpool46 + new computers)
>
>
  1. Move PC's to control room (If Insulab allows us)
  2. Move PC's from the network database (bl4sdaq, bl4shv, bl4sdaqclone, lnxpool41, lnxpool46 + new computers)
 05.09.2014 Friday
Changed:
<
<
  1. Move detectors into the barracks.
  2. Test Network connection of the PC's in main control room.
>
>
  1. Move detectors into the barracks.
  2. Test Network connection of the PC's in main control room.
 08.09.2014 Monday
Changed:
<
<
  1. Install cables, detectors, PC's. Keep DWC1 & DWC2 out of beam axis.
  2. Check signals, delays etc.
  3. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
  4. Install Webcam PC's (multiplugs and extension cables)
>
>
  1. Install cables, detectors, PC's. Keep DWC1 & DWC2 out of beam axis.
  2. Check signals, delays etc.
  3. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
  4. Install Webcam PC's (multiplugs and extension cables)
 09.09.2014 Tuesday
Changed:
<
<
  1. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  2. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  3. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
  4. Lead Glass Calibration with the electron beam at various energies for each Lead Glass.
  5. Calibrate DWC with fake signals.
  6. Calibrate DWC with focusing beam in front of it. (?)
>
>
  1. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  2. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  3. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
  4. Lead Glass Calibration with the electron beam at various energies for each Lead Glass.
  5. Calibrate DWC with fake signals.
  6. Calibrate DWC with focusing beam in front of it. (?)
 10.09.2014 Wednesday
Changed:
<
<
  1. Introduction to Beamline
  2. Shift Training
  3. Installation of Dominicus College Calorimeters
  4. Finalizing installation with students.
>
>
  1. Introduction to Beamline
  2. Shift Training
  3. Installation of Dominicus College Calorimeters
  4. Finalizing installation with students.
 11.09.2014 Thursday
Changed:
<
<
  1. Calibration of Dominicus College Calorimeters with electron beam at various energies + hadrons + muons.
>
>
  1. Calibration of Dominicus College Calorimeters with electron beam at various energies + hadrons + muons.
 12.09.2014 Friday
Changed:
<
<
  1. Take data with "pion trigger", 4GeV beam
  2. Study "other" triggers from scaler counts.
>
>
  1. Take data with "pion trigger", 4GeV beam
  2. Study "other" triggers from scaler counts.
 13.09.2014 Saturday
Changed:
<
<
  1. Take data with "pion trigger", 4GeV beam
  2. Study "other" triggers from scaler counts.
>
>
  1. Take data with "pion trigger", 4GeV beam
  2. Study "other" triggers from scaler counts.
 14.09.2014 Sunday
Changed:
<
<
  1. Try "other" triggers, 4GeV beam. (For electron trigger, remove DWC?)
>
>
  1. Try "other" triggers, 4GeV beam. (For electron trigger, remove DWC?)
 15.09.2014 Monday
Changed:
<
<
  1. Take data removing last DWC?
>
>
  1. Take data removing last DWC?
 16.09.2014 Tuesday
Deleted:
<
<

 

Useful Links

-- SaimeSarikaya - 12 Aug 2014 -- CenkYildiz - 22 Aug 2014 \ No newline at end of file

Revision 92014-08-25 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 115 to 115
 
  1. Study "other" triggers from scaler counts.

14.09.2014 Sunday

Changed:
<
<
  1. Try "other" triggers, 4GeV beam.
>
>
  1. Try "other" triggers, 4GeV beam. (For electron trigger, remove DWC?)
  15.09.2014 Monday
  1. Take data removing last DWC?
Line: 129 to 129
 

Useful Links

Changed:
<
<
-- SaimeSarikaya - 12 Aug 2014
>
>
-- SaimeSarikaya - 12 Aug 2014 -- CenkYildiz - 22 Aug 2014
 \ No newline at end of file

Revision 82014-08-22 - MarkusJoos

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Changed:
<
<
This is the White Board of the Beam Line for schools experiment. It contains informations of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.
>
>
This is the White Board of the Beam Line for schools experiment. It contains information of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.
 

Todays shifters

Changed:
<
<
>
>
<!-- /editTable -->
 
  Morning Afternoon Evening
Shift Leader Cenk Y. Saime G. Cenk Y.
Run Control Shifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
Line: 18 to 18
  The DWCs will be calibrated in the morning then then physics data will be taken!

Known Issues

Changed:
<
<
>
>
<!-- /editTable -->
 
ERORR TYPE THE MESSAGE WHAT TO DO
CHIP error on ERS 16:00:44 ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Stopless removal: Failed to reset the ResInfoProvider after stop of run. Ignore
     
Line: 32 to 32
 Cenk Yildiz: 74948 ( +41 22 76 74948)

Saime Gurbuz: 0076

Added:
>
>
Markus Joos: 160663
 

BL4S Shift Plan

Shift Leader

Revision 72014-08-21 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 104 to 104
 
  1. Calibration of Dominicus College Calorimeters with electron beam at various energies + hadrons + muons.

12.09.2014 Friday

Changed:
<
<
  1. Take data with "pion trigger"
>
>
  1. Take data with "pion trigger", 4GeV beam
 
  1. Study "other" triggers from scaler counts.

13.09.2014 Saturday

Changed:
<
<
  1. Take data with "pion trigger"
>
>
  1. Take data with "pion trigger", 4GeV beam
 
  1. Study "other" triggers from scaler counts.

14.09.2014 Sunday

Changed:
<
<
  1. Try "other" triggers.
>
>
  1. Try "other" triggers, 4GeV beam.
  15.09.2014 Monday
Changed:
<
<
>
>
  1. Take data removing last DWC?
  16.09.2014 Tuesday

Revision 62014-08-21 - CenkYildiz

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 69 to 69
 

Online Histograms for Detector and DAQ Shifter

Added:
>
>

Run Plan

04.09.2014 Thursday

  1. Move PC's to control room (If Insulab allows us)
  2. Move PC's from the network database (bl4sdaq, bl4shv, bl4sdaqclone, lnxpool41, lnxpool46 + new computers)

05.09.2014 Friday

  1. Move detectors into the barracks.
  2. Test Network connection of the PC's in main control room.

08.09.2014 Monday

  1. Install cables, detectors, PC's. Keep DWC1 & DWC2 out of beam axis.
  2. Check signals, delays etc.
  3. Setup the NIM modules for "other" triggers (muon, electron, muon+electron)
  4. Install Webcam PC's (multiplugs and extension cables)

09.09.2014 Tuesday

  1. Set Cherenkov pressures: P_Cherenkov1 > m_pi, P_Cherenkov
  2. Cherenkov Test Run : Run with P_Cherenkov1 > m_pi, take coincidence of SC0 and CH1, then we'll have pi, mu, e in the beam. Take a 10 min run, get lead glass spectrum(central 4). Check what happens when you remove events that triggered CH2.
  3. Pion Trigger Test Run : Run with P_Cherenkov1 > m_pi, P_Cherenkov2 < m_pi, take coincidence of SC0 & CH1, veto with CH2 , then we'll have only pi going into system. Take a 10 min run, get lead glass spectrum. Compare with previous run.
  4. Lead Glass Calibration with the electron beam at various energies for each Lead Glass.
  5. Calibrate DWC with fake signals.
  6. Calibrate DWC with focusing beam in front of it. (?)

10.09.2014 Wednesday

  1. Introduction to Beamline
  2. Shift Training
  3. Installation of Dominicus College Calorimeters
  4. Finalizing installation with students.

11.09.2014 Thursday

  1. Calibration of Dominicus College Calorimeters with electron beam at various energies + hadrons + muons.

12.09.2014 Friday

  1. Take data with "pion trigger"
  2. Study "other" triggers from scaler counts.

13.09.2014 Saturday

  1. Take data with "pion trigger"
  2. Study "other" triggers from scaler counts.

14.09.2014 Sunday

  1. Try "other" triggers.

15.09.2014 Monday

16.09.2014 Tuesday

 

Useful Links

-- SaimeSarikaya - 12 Aug 2014 \ No newline at end of file

Revision 52014-08-19 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 8 to 8
 

Todays shifters

  Morning Afternoon Evening
Changed:
<
<
Shift Leader Cenk Yildiz Saime Gurbuz Saime Gurbuz
>
>
Shift Leader Cenk Y. Saime G. Cenk Y.
 
Run Control Shifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
Detector and DAQ Sfifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
Line: 36 to 36
 
Shift Leader
  Morning Afternoon Evening
Changed:
<
<
10.09.2014 Cenk Y. Saime G. Saime G.
>
>
10.09.2014 Cenk Y. Saime G. Cenk Y.
 
11.09.2014 Saime G. Markus J. Christoph R.
12.09.2014      
13.09.2014      

Revision 42014-08-18 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 14 to 14
 

Run Plan

Added:
>
>
Run Plan of 1x.09.2014:

The DWCs will be calibrated in the morning then then physics data will be taken!

 

Known Issues

Added:
>
>
ERORR TYPE THE MESSAGE WHAT TO DO
CHIP error on ERS 16:00:44 ERROR CHIP ch::atdaq::ces::utils::CHIPIssue Stopless removal: Failed to reset the ResInfoProvider after stop of run. Ignore
     
     
     
 

Mesage Board

Added:
>
>
Ignore the DWC and Scintillator Histograms during Lead Glass Calibration
 

On Call Experts

Added:
>
>
Cenk Yildiz: 74948 ( +41 22 76 74948)

Saime Gurbuz: 0076

 

BL4S Shift Plan

Added:
>
>
Shift Leader
  Morning Afternoon Evening
10.09.2014 Cenk Y. Saime G. Saime G.
11.09.2014 Saime G. Markus J. Christoph R.
12.09.2014      
13.09.2014      
14.09.2014      
15.09.2014      
16.09.2014      
17.09.2014      

Run Control Shifter
  Morning Afternoon Evening
10.09.2014 Marie K. & James M. Marie K. & James M. Marie K. & James M.
11.09.2014 Marie K. & James M. Marie K. & James M. Marie K. & James M.
12.09.2014      
13.09.2014      
14.09.2014      
15.09.2014      
16.09.2014      
17.09.2014      

Detector And DAQ Shifter
  Morning Afternoon Evening
10.09.2014 Marie K. & James M. Marie K. & James M. Marie K. & James M.
11.09.2014      
12.09.2014      
13.09.2014      
14.09.2014      
15.09.2014      
16.09.2014      
17.09.2014      

Online Histograms for Detector and DAQ Shifter

 

Useful Links

-- SaimeSarikaya - 12 Aug 2014 \ No newline at end of file

Revision 32014-08-12 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Revision 22014-08-12 - SaimeSarikaya

Line: 1 to 1
 
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

Line: 20 to 20
 

On Call Experts

Added:
>
>

BL4SShiftPlan

 

Useful Links

-- SaimeSarikaya - 12 Aug 2014

Revision 12014-08-12 - SaimeSarikaya

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="BeamLineForSchools"

Beam Line For Schools Experiment White Board

This is the White Board of the Beam Line for schools experiment. It contains informations of the run plan of the week and some information which will help the shifters at the control room. In case you are confused about which action to take, please contact the shift leader or on call experts below.

Todays shifters

  Morning Afternoon Evening
Shift Leader Cenk Yildiz Saime Gurbuz Saime Gurbuz
Run Control Shifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.
Detector and DAQ Sfifter Marie K. & James M. Marie K. & James M. Angelica B. & Gerard R.

Run Plan

Known Issues

Mesage Board

On Call Experts

Useful Links

-- SaimeSarikaya - 12 Aug 2014
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback