Difference: TepxSimulations (1 vs. 13)

Revision 132019-08-21 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 10 to 10
 
Figure Caption
Changed:
<
<
D1R1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D1R5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D4R1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
deviation.png Relative non-linearity for each disk of the Tracker Endcap Pixel Detector (TEPX). The deviation is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value. For each disk, the size of the box is determined by taking the minimum and maximum deviations across all rings. For clusters, this deviation is smaller than 1% over a pileup range from 0 to 200.
diskring_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard deviation, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
>
>
linD1R1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linD1R5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linD4R1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
deviation_lin.png Relative non-linearity for each disk of the Tracker Endcap Pixel Detector (TEPX). The deviation is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value. For each disk, the size of the box is determined by taking the minimum and maximum deviations across all rings. For clusters, this deviation is smaller than 1% over a pileup range from 0 to 200.
disk_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard deviation, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
  -- AlexanderJonasRuede - 2019-08-12
Changed:
<
<
META FILEATTACHMENT attachment="D1R1.png" attr="" comment="" date="1566380350" name="D1R1.png" path="D1R1.png" size="197304" user="aruede" version="1"
META FILEATTACHMENT attachment="D1R5.png" attr="" comment="" date="1566380355" name="D1R5.png" path="D1R5.png" size="201462" user="aruede" version="1"
META FILEATTACHMENT attachment="D4R1.png" attr="" comment="" date="1566380360" name="D4R1.png" path="D4R1.png" size="199792" user="aruede" version="1"
META FILEATTACHMENT attachment="deviation.png" attr="" comment="" date="1566380364" name="deviation.png" path="deviation.png" size="146640" user="aruede" version="1"
META FILEATTACHMENT attachment="diskring_rates.png" attr="" comment="" date="1566380370" name="diskring_rates.png" path="diskring_rates.png" size="208825" user="aruede" version="1"
>
>
META FILEATTACHMENT attachment="linD1R1.png" attr="" comment="" date="1566395785" name="linD1R1.png" path="linD1R1.png" size="197304" user="aruede" version="1"
META FILEATTACHMENT attachment="linD1R5.png" attr="" comment="" date="1566395792" name="linD1R5.png" path="linD1R5.png" size="201462" user="aruede" version="1"
META FILEATTACHMENT attachment="linD4R1.png" attr="" comment="" date="1566395798" name="linD4R1.png" path="linD4R1.png" size="199792" user="aruede" version="1"
META FILEATTACHMENT attachment="deviation_lin.png" attr="" comment="" date="1566395804" name="deviation_lin.png" path="deviation_lin.png" size="146640" user="aruede" version="1"
META FILEATTACHMENT attachment="disk_rates.png" attr="" comment="" date="1566395810" name="disk_rates.png" path="disk_rates.png" size="208825" user="aruede" version="1"

Revision 122019-08-21 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Revision 112019-08-21 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 10 to 10
 
Figure Caption
Changed:
<
<
  Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
  Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
  Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
  Relative non-linearity for each disk of the Tracker Endcap Pixel Detector (TEPX). The deviation is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value. For each disk, the size of the box is determined by taking the minimum and maximum deviations across all rings. For clusters, this deviation is smaller than 1% over a pileup range from 0 to 200.
  Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
>
>
D1R1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D1R5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D4R1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
deviation.png Relative non-linearity for each disk of the Tracker Endcap Pixel Detector (TEPX). The deviation is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value. For each disk, the size of the box is determined by taking the minimum and maximum deviations across all rings. For clusters, this deviation is smaller than 1% over a pileup range from 0 to 200.
diskring_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard deviation, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
  -- AlexanderJonasRuede - 2019-08-12

Revision 102019-08-21 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 10 to 10
 
Figure Caption
Changed:
<
<
D1R1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D1R5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D4R1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
deviation.png Relative non-linearity for each disk of the Tracker Endcap Pixel Detector (TEPX). The deviation is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value. For each disk, the size of the box is determined by taking the minimum and maximum deviations across all rings. For clusters, this deviation is smaller than 1% over a pileup range from 0 to 200.
diskring_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
>
>
  Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
  Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
  Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
  Relative non-linearity for each disk of the Tracker Endcap Pixel Detector (TEPX). The deviation is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value. For each disk, the size of the box is determined by taking the minimum and maximum deviations across all rings. For clusters, this deviation is smaller than 1% over a pileup range from 0 to 200.
  Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
  -- AlexanderJonasRuede - 2019-08-12
Changed:
<
<
META FILEATTACHMENT attachment="diskring_rates.png" attr="" comment="" date="1566374857" name="diskring_rates.png" path="diskring_rates.png" size="208825" user="aruede" version="2"
META FILEATTACHMENT attachment="deviation.png" attr="" comment="" date="1566374835" name="deviation.png" path="deviation.png" size="146640" user="aruede" version="2"
META FILEATTACHMENT attachment="D1R1.png" attr="" comment="" date="1566374798" name="D1R1.png" path="D1R1.png" size="197304" user="aruede" version="2"
META FILEATTACHMENT attachment="D1R5.png" attr="" comment="" date="1566374812" name="D1R5.png" path="D1R5.png" size="201462" user="aruede" version="2"
META FILEATTACHMENT attachment="D4R1.png" attr="" comment="" date="1566374824" name="D4R1.png" path="D4R1.png" size="199792" user="aruede" version="2"
>
>
META FILEATTACHMENT attachment="D1R1.png" attr="" comment="" date="1566380350" name="D1R1.png" path="D1R1.png" size="197304" user="aruede" version="1"
META FILEATTACHMENT attachment="D1R5.png" attr="" comment="" date="1566380355" name="D1R5.png" path="D1R5.png" size="201462" user="aruede" version="1"
META FILEATTACHMENT attachment="D4R1.png" attr="" comment="" date="1566380360" name="D4R1.png" path="D4R1.png" size="199792" user="aruede" version="1"
META FILEATTACHMENT attachment="deviation.png" attr="" comment="" date="1566380364" name="deviation.png" path="deviation.png" size="146640" user="aruede" version="1"
META FILEATTACHMENT attachment="diskring_rates.png" attr="" comment="" date="1566380370" name="diskring_rates.png" path="diskring_rates.png" size="208825" user="aruede" version="1"

Revision 92019-08-21 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 18 to 18
  -- AlexanderJonasRuede - 2019-08-12
Changed:
<
<
META FILEATTACHMENT attachment="diskring_rates.png" attr="" comment="" date="1565787420" name="diskring_rates.png" path="diskring_rates.png" size="201968" user="aruede" version="1"
META FILEATTACHMENT attachment="deviation.png" attr="" comment="" date="1565854041" name="deviation.png" path="deviation.png" size="145868" user="aruede" version="1"
META FILEATTACHMENT attachment="D1R1.png" attr="" comment="" date="1565854502" name="D1R1.png" path="D1R1.png" size="198452" user="aruede" version="1"
META FILEATTACHMENT attachment="D1R5.png" attr="" comment="" date="1565854508" name="D1R5.png" path="D1R5.png" size="202631" user="aruede" version="1"
META FILEATTACHMENT attachment="D4R1.png" attr="" comment="" date="1565854515" name="D4R1.png" path="D4R1.png" size="200761" user="aruede" version="1"
>
>
META FILEATTACHMENT attachment="diskring_rates.png" attr="" comment="" date="1566374857" name="diskring_rates.png" path="diskring_rates.png" size="208825" user="aruede" version="2"
META FILEATTACHMENT attachment="deviation.png" attr="" comment="" date="1566374835" name="deviation.png" path="deviation.png" size="146640" user="aruede" version="2"
META FILEATTACHMENT attachment="D1R1.png" attr="" comment="" date="1566374798" name="D1R1.png" path="D1R1.png" size="197304" user="aruede" version="2"
META FILEATTACHMENT attachment="D1R5.png" attr="" comment="" date="1566374812" name="D1R5.png" path="D1R5.png" size="201462" user="aruede" version="2"
META FILEATTACHMENT attachment="D4R1.png" attr="" comment="" date="1566374824" name="D4R1.png" path="D4R1.png" size="199792" user="aruede" version="2"

Revision 82019-08-15 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 10 to 10
 
Figure Caption
Changed:
<
<
cluster_linearity_d1r1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
cluster_linearity_d1r5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
cluster_linearity_d4r1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linearitydeviation.png Relative non-linearity for all rings of all disks of the Tracker Endcap Pixel Detector (TEPX).
It is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value.
>
>
D1R1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D1R5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
D4R1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
deviation.png Relative non-linearity for each disk of the Tracker Endcap Pixel Detector (TEPX). The deviation is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value. For each disk, the size of the box is determined by taking the minimum and maximum deviations across all rings. For clusters, this deviation is smaller than 1% over a pileup range from 0 to 200.
 
diskring_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.

-- AlexanderJonasRuede - 2019-08-12

Deleted:
<
<
META FILEATTACHMENT attachment="linearitydeviation.png" attr="" comment="" date="1565622572" name="linearitydeviation.png" path="linearitydeviation.png" size="119023" user="aruede" version="2"
META FILEATTACHMENT attachment="cluster_linearity_d1r1.png" attr="" comment="" date="1565787401" name="cluster_linearity_d1r1.png" path="cluster_linearity_d1r1.png" size="216080" user="aruede" version="1"
META FILEATTACHMENT attachment="cluster_linearity_d1r5.png" attr="" comment="" date="1565787668" name="cluster_linearity_d1r5.png" path="cluster_linearity_d1r5.png" size="215088" user="aruede" version="2"
META FILEATTACHMENT attachment="cluster_linearity_d4r1.png" attr="" comment="" date="1565787680" name="cluster_linearity_d4r1.png" path="cluster_linearity_d4r1.png" size="216153" user="aruede" version="2"
 
META FILEATTACHMENT attachment="diskring_rates.png" attr="" comment="" date="1565787420" name="diskring_rates.png" path="diskring_rates.png" size="201968" user="aruede" version="1"
Added:
>
>
META FILEATTACHMENT attachment="deviation.png" attr="" comment="" date="1565854041" name="deviation.png" path="deviation.png" size="145868" user="aruede" version="1"
META FILEATTACHMENT attachment="D1R1.png" attr="" comment="" date="1565854502" name="D1R1.png" path="D1R1.png" size="198452" user="aruede" version="1"
META FILEATTACHMENT attachment="D1R5.png" attr="" comment="" date="1565854508" name="D1R5.png" path="D1R5.png" size="202631" user="aruede" version="1"
META FILEATTACHMENT attachment="D4R1.png" attr="" comment="" date="1565854515" name="D4R1.png" path="D4R1.png" size="200761" user="aruede" version="1"

Revision 72019-08-14 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 10 to 10
 
Figure Caption
Changed:
<
<
linearity_d1r1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linearity_d1r5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linearity_d4r1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linearitydeviation.png Relative non-linearity for all rings of all disks of the Inner Tracker Endcap Pixel Detector (TEPX).
It is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value.
ring_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
>
>
cluster_linearity_d1r1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
cluster_linearity_d1r5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
cluster_linearity_d4r1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linearitydeviation.png Relative non-linearity for all rings of all disks of the Tracker Endcap Pixel Detector (TEPX).
It is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value.
diskring_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
  -- AlexanderJonasRuede - 2019-08-12
Deleted:
<
<
META FILEATTACHMENT attachment="linearity_d1r5.png" attr="" comment="" date="1565783070" name="linearity_d1r5.png" path="linearity_d1r5.png" size="213248" user="aruede" version="3"
META FILEATTACHMENT attachment="linearity_d4r1.png" attr="" comment="" date="1565783082" name="linearity_d4r1.png" path="linearity_d4r1.png" size="214289" user="aruede" version="3"
 
META FILEATTACHMENT attachment="linearitydeviation.png" attr="" comment="" date="1565622572" name="linearitydeviation.png" path="linearitydeviation.png" size="119023" user="aruede" version="2"
Changed:
<
<
META FILEATTACHMENT attachment="ring_rates.png" attr="" comment="" date="1565783664" name="ring_rates.png" path="ring_rates.png" size="201968" user="aruede" version="3"
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565784859" name="linearity_d1r1.png" path="linearity_d1r1.png" size="216080" user="aruede" version="1"
>
>
META FILEATTACHMENT attachment="cluster_linearity_d1r1.png" attr="" comment="" date="1565787401" name="cluster_linearity_d1r1.png" path="cluster_linearity_d1r1.png" size="216080" user="aruede" version="1"
META FILEATTACHMENT attachment="cluster_linearity_d1r5.png" attr="" comment="" date="1565787668" name="cluster_linearity_d1r5.png" path="cluster_linearity_d1r5.png" size="215088" user="aruede" version="2"
META FILEATTACHMENT attachment="cluster_linearity_d4r1.png" attr="" comment="" date="1565787680" name="cluster_linearity_d4r1.png" path="cluster_linearity_d4r1.png" size="216153" user="aruede" version="2"
META FILEATTACHMENT attachment="diskring_rates.png" attr="" comment="" date="1565787420" name="diskring_rates.png" path="diskring_rates.png" size="201968" user="aruede" version="1"

Revision 62019-08-14 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 18 to 18
  -- AlexanderJonasRuede - 2019-08-12
Deleted:
<
<
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565783056" name="linearity_d1r1.png" path="linearity_d1r1.png" size="216080" user="aruede" version="3"
 
META FILEATTACHMENT attachment="linearity_d1r5.png" attr="" comment="" date="1565783070" name="linearity_d1r5.png" path="linearity_d1r5.png" size="213248" user="aruede" version="3"
META FILEATTACHMENT attachment="linearity_d4r1.png" attr="" comment="" date="1565783082" name="linearity_d4r1.png" path="linearity_d4r1.png" size="214289" user="aruede" version="3"
META FILEATTACHMENT attachment="linearitydeviation.png" attr="" comment="" date="1565622572" name="linearitydeviation.png" path="linearitydeviation.png" size="119023" user="aruede" version="2"
META FILEATTACHMENT attachment="ring_rates.png" attr="" comment="" date="1565783664" name="ring_rates.png" path="ring_rates.png" size="201968" user="aruede" version="3"
Added:
>
>
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565784859" name="linearity_d1r1.png" path="linearity_d1r1.png" size="216080" user="aruede" version="1"

Revision 52019-08-14 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 10 to 10
 
Figure Caption
Changed:
<
<
linearity_d1r1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Inner Tracker Endcap Pixel Detector (TEPX).
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the Van der Meer calibration.
linearity_d1r5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Inner Tracker Endcap Pixel Detector (TEPX).
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the Van der Meer calibration.
linearity_d4r1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Inner Tracker Endcap Pixel Detector (TEPX).
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the Van der Meer calibration.
>
>
linearity_d1r1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linearity_d1r5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
linearity_d4r1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Tracker Endcap Pixel Detector (TEPX).
The figure shows the linear behaviour of the mean number of clusters over the full pileup range from 0 to 200.
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the van der Meer calibration.
 
linearitydeviation.png Relative non-linearity for all rings of all disks of the Inner Tracker Endcap Pixel Detector (TEPX).
It is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value.
Changed:
<
<
ring_rates.png Simulated distribution of the per-module data rates for each ring of TEPX at pileup 200 and a rate of 75 kHz of zero-bias triggers. The rates are calculated over all disks of TEPX, using the RD53B -specific encoding and do not account for any link layer protocol.
>
>
ring_rates.png Simulated mean data rates per module for each ring of all Tracker Endcap Pixel Detector (TEPX) disks at pileup 200 and a rate of 75 kHz of zero-bias triggers. The mean rates are shown with their standard, accounting only for the RD53B -specific encoding and do not include overhead of any link layer protocol.
  -- AlexanderJonasRuede - 2019-08-12
Changed:
<
<
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565622528" name="linearity_d1r1.png" path="linearity_d1r1.png" size="174766" user="aruede" version="2"
META FILEATTACHMENT attachment="linearity_d1r5.png" attr="" comment="" date="1565622544" name="linearity_d1r5.png" path="linearity_d1r5.png" size="178276" user="aruede" version="2"
META FILEATTACHMENT attachment="linearity_d4r1.png" attr="" comment="" date="1565622558" name="linearity_d4r1.png" path="linearity_d4r1.png" size="176184" user="aruede" version="2"
>
>
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565783056" name="linearity_d1r1.png" path="linearity_d1r1.png" size="216080" user="aruede" version="3"
META FILEATTACHMENT attachment="linearity_d1r5.png" attr="" comment="" date="1565783070" name="linearity_d1r5.png" path="linearity_d1r5.png" size="213248" user="aruede" version="3"
META FILEATTACHMENT attachment="linearity_d4r1.png" attr="" comment="" date="1565783082" name="linearity_d4r1.png" path="linearity_d4r1.png" size="214289" user="aruede" version="3"
 
META FILEATTACHMENT attachment="linearitydeviation.png" attr="" comment="" date="1565622572" name="linearitydeviation.png" path="linearitydeviation.png" size="119023" user="aruede" version="2"
Changed:
<
<
META FILEATTACHMENT attachment="ring_rates.png" attr="" comment="" date="1565614869" name="ring_rates.png" path="ring_rates.png" size="142650" user="aruede" version="1"
>
>
META FILEATTACHMENT attachment="ring_rates.png" attr="" comment="" date="1565783664" name="ring_rates.png" path="ring_rates.png" size="201968" user="aruede" version="3"

Revision 42019-08-12 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Revision 32019-08-12 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Revision 22019-08-12 - AlexanderJonasRuede

Line: 1 to 1
 
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Line: 18 to 18
  -- AlexanderJonasRuede - 2019-08-12
Changed:
<
<
META FILEATTACHMENT attachment="linearity_d1r1.pdf" attr="" comment="" date="1565610940" name="linearity_d1r1.pdf" path="linearity_d1r1.pdf" size="36426" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565610953" name="linearity_d1r1.png" path="linearity_d1r1.png" size="151385" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d1r5.pdf" attr="" comment="" date="1565610959" name="linearity_d1r5.pdf" path="linearity_d1r5.pdf" size="37370" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d1r5.png" attr="" comment="" date="1565610964" name="linearity_d1r5.png" path="linearity_d1r5.png" size="154176" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d4r1.pdf" attr="" comment="" date="1565610973" name="linearity_d4r1.pdf" path="linearity_d4r1.pdf" size="36585" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d4r1.png" attr="" comment="" date="1565610978" name="linearity_d4r1.png" path="linearity_d4r1.png" size="152877" user="aruede" version="1"
META FILEATTACHMENT attachment="linearitydeviation.pdf" attr="" comment="" date="1565610983" name="linearitydeviation.pdf" path="linearitydeviation.pdf" size="35301" user="aruede" version="1"
META FILEATTACHMENT attachment="linearitydeviation.png" attr="" comment="" date="1565610988" name="linearitydeviation.png" path="linearitydeviation.png" size="102537" user="aruede" version="1"
META FILEATTACHMENT attachment="ring_rates.pdf" attr="" comment="" date="1565614589" name="ring_rates.pdf" path="ring_rates.pdf" size="25331" user="aruede" version="2"
>
>
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565622528" name="linearity_d1r1.png" path="linearity_d1r1.png" size="174766" user="aruede" version="2"
META FILEATTACHMENT attachment="linearity_d1r5.png" attr="" comment="" date="1565622544" name="linearity_d1r5.png" path="linearity_d1r5.png" size="178276" user="aruede" version="2"
META FILEATTACHMENT attachment="linearity_d4r1.png" attr="" comment="" date="1565622558" name="linearity_d4r1.png" path="linearity_d4r1.png" size="176184" user="aruede" version="2"
META FILEATTACHMENT attachment="linearitydeviation.png" attr="" comment="" date="1565622572" name="linearitydeviation.png" path="linearitydeviation.png" size="119023" user="aruede" version="2"
 
META FILEATTACHMENT attachment="ring_rates.png" attr="" comment="" date="1565614869" name="ring_rates.png" path="ring_rates.png" size="142650" user="aruede" version="1"

Revision 12019-08-12 - AlexanderJonasRuede

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="BrilDPGResults"

<!--StartFragment-->
TEPX Simulations for TWEPP2019
<!--EndFragment-->

Introduction:

In order to establish an understanding of the potential properties of TEPX as luminometer for Phase 2 CMS luminosity measurement, detector simulations are being carried out by the BRIL collaboration. Since for Phase-II the range of pileup values over which the vdM calibration will have to be extrapolated is large with respect to Run-II, the linearity of observables accessible with TEPX as a function of pileup is of particular interest.

For this purpose, detailed detector simulations have been started using the CMSSW release 10_4_0_pre2 and the Inner Tracker geometry version 6.1.3. To generate data samples over a large range of pileup, single-neutrino events have been overlaid with a variable number of minimum bias events using the CMSSW mixing module. 100,000 events have been generated for pileup values smaller than 20 and 10,000 events have been used for all larger pileup numbers to limit computing time to reasonable values.

Figure
<!-- -->
Sorted ascending
Caption
linearity_d1r1.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 1 of the Inner Tracker Endcap Pixel Detector (TEPX).
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the Van der Meer calibration.
linearity_d1r5.png Simulated mean number of clusters as a function of pileup for Disk 1 Ring 5 of the Inner Tracker Endcap Pixel Detector (TEPX).
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the Van der Meer calibration.
linearity_d4r1.png Simulated mean number of clusters as a function of pileup for Disk 4 Ring 1 of the Inner Tracker Endcap Pixel Detector (TEPX).
The data points are fitted with a first-order polynomial in the pileup interval from 0 to 2, and the extrapolation to pileup 200 is shown with a 95% confidence interval.
This is done to replicate the principal approach taken with the Van der Meer calibration.
linearitydeviation.png Relative non-linearity for all rings of all disks of the Inner Tracker Endcap Pixel Detector (TEPX).
It is calculated as the relative difference between the data point and the value of the fit function at the respective pileup value.
ring_rates.png Simulated distribution of the per-module data rates for each ring of TEPX at pileup 200 and a rate of 75 kHz of zero-bias triggers. The rates are calculated over all disks of TEPX, using the RD53B -specific encoding and do not account for any link layer protocol.

-- AlexanderJonasRuede - 2019-08-12

META FILEATTACHMENT attachment="linearity_d1r1.pdf" attr="" comment="" date="1565610940" name="linearity_d1r1.pdf" path="linearity_d1r1.pdf" size="36426" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d1r1.png" attr="" comment="" date="1565610953" name="linearity_d1r1.png" path="linearity_d1r1.png" size="151385" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d1r5.pdf" attr="" comment="" date="1565610959" name="linearity_d1r5.pdf" path="linearity_d1r5.pdf" size="37370" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d1r5.png" attr="" comment="" date="1565610964" name="linearity_d1r5.png" path="linearity_d1r5.png" size="154176" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d4r1.pdf" attr="" comment="" date="1565610973" name="linearity_d4r1.pdf" path="linearity_d4r1.pdf" size="36585" user="aruede" version="1"
META FILEATTACHMENT attachment="linearity_d4r1.png" attr="" comment="" date="1565610978" name="linearity_d4r1.png" path="linearity_d4r1.png" size="152877" user="aruede" version="1"
META FILEATTACHMENT attachment="linearitydeviation.pdf" attr="" comment="" date="1565610983" name="linearitydeviation.pdf" path="linearitydeviation.pdf" size="35301" user="aruede" version="1"
META FILEATTACHMENT attachment="linearitydeviation.png" attr="" comment="" date="1565610988" name="linearitydeviation.png" path="linearitydeviation.png" size="102537" user="aruede" version="1"
META FILEATTACHMENT attachment="ring_rates.pdf" attr="" comment="" date="1565614589" name="ring_rates.pdf" path="ring_rates.pdf" size="25331" user="aruede" version="2"
META FILEATTACHMENT attachment="ring_rates.png" attr="" comment="" date="1565614869" name="ring_rates.png" path="ring_rates.png" size="142650" user="aruede" version="1"
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback