Difference: Cooling (5 vs. 6)

Revision 62008-08-19 - AnnVL

Line: 1 to 1
 
META TOPICPARENT name="VELOOperatingManuals"
Changed:
<
<

PVSS project

>
>
<!-- /ActionTrackerPlugin -->
---++ PVSS project
  The Cooling PVSS project runs locally on the Windows machine vepccry (on the cooling platform).
Added:
>
>
In principle you should ONLY re-start the PVSS project in case of a power cut, or in case the project is not running.

To do so:

 
  • login into vepccry (with username Koelboer and the usual password - contact Martin/Eddy/Ann if you need to know the password)
  • start/stop the project Velo_Cooling_DEV

Starting FSM (not available for the time being)

Line: 10 to 14
  Before you start the cooling system check that the power supplies of the base-plate heaters are switched on. The 8 power supplies are located at the bottom of the C3B02 rack. Note that the voltage/current reading can be zero when the system cooling has been off for long time. Switch the power supplies on when this is not the case (small on/off button on each supply).
Changed:
<
<
The system can be started from the user interface (see section 5 and figure 1 of the manual).
>
>
The system can be started from the user interface on the PLC which is located on the cooling platform (see section 5 and figure 1 of the manual).
 
Changed:
<
<

cooling_ui.bmp
>
>

cooling_ui.bmp
 
  • Push the button “start TR C-side” to start the cooling of the C-side. (for the powering shifts only this action is required)
  • Push the button “start TL A-side” to start the cooling of the A-side.
Line: 39 to 43
 
  • Step i) will be done when the temperature at the other side of the transfer line (given by TT46 on 'detector status' page ) is at 18'C.
Changed:
<
<

cooling_detector_status.bmp
>
>

cooling_detector_status.bmp
 

Switch off

  • To switch off push the button “Stop TL & TR”
Line: 50 to 54
  -- KarolHennessy - 14 Aug 2008
Deleted:
<
<
META FILEATTACHMENT attachment="cooling_detector_status.bmp" attr="" comment="" date="1210022760" name="cooling_detector_status.bmp" path="C:\users\martinb\VELO\Cooling\cooling_detector_status.bmp" size="2387030" stream="C:\users\martinb\VELO\Cooling\cooling_detector_status.bmp" user="Main.MartinVanBeuzekom" version="1"
META FILEATTACHMENT attachment="cooling_ui.bmp" attr="" comment="" date="1210022178" name="cooling_ui.bmp" path="C:\users\martinb\VELO\Cooling\cooling_ui.bmp" size="2383794" stream="C:\users\martinb\VELO\Cooling\cooling_ui.bmp" user="Main.MartinVanBeuzekom" version="1"
 
META FILEATTACHMENT attachment="CoolingManual_V05May08.doc" attr="" comment="" date="1210021491" name="CoolingManual_V05May08.doc" path="C:\users\martinb\VELO\Cooling\CoolingManual_V05May08.doc" size="660480" stream="C:\users\martinb\VELO\Cooling\CoolingManual_V05May08.doc" user="Main.MartinVanBeuzekom" version="1"
Added:
>
>
META FILEATTACHMENT attachment="cooling_ui.bmp" attr="" comment="" date="1210022178" name="cooling_ui.bmp" path="C:\users\martinb\VELO\Cooling\cooling_ui.bmp" size="2383794" stream="C:\users\martinb\VELO\Cooling\cooling_ui.bmp" user="Main.MartinVanBeuzekom" version="1"
META FILEATTACHMENT attachment="cooling_detector_status.bmp" attr="" comment="" date="1210022760" name="cooling_detector_status.bmp" path="C:\users\martinb\VELO\Cooling\cooling_detector_status.bmp" size="2387030" stream="C:\users\martinb\VELO\Cooling\cooling_detector_status.bmp" user="Main.MartinVanBeuzekom" version="1"
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback