Difference: LHCbStripping23 (2 vs. 3)

Revision 32015-07-21 - RicardoVazquezGomez

Line: 1 to 1
 
META TOPICPARENT name="LHCbStripping"
-- RicardoVazquezGomez - 2015-07-20

Stripping23 FAQ

Changed:
<
<
>
>

 
Changed:
<
<
If you want to create a new stripping line, you should look here.
>
>
If you want to create a new stripping line, you should look here. The general way of testing the lines is described here. Below follows a more detailed explanation for specific S23 testing.
 

How to deal with Vertex and PVRefit in the Stripping

Line: 28 to 28
  If the requirements are not satisifed, the changes to the configuration dictionary can be done inside the testing script without needing to modify and compile the stripping algorithm. To do so uncomment the line
Changed:
<
<
confs[confname]["CONFIG"]["LineName"]["CutName"] = newValue
>
>
confs[confname]["CONFIG"]["CutName"] = NewValue
 
Changed:
<
<
This will change at the configuration time the value for the selected cut. Remember to update the stripping algorithm after arriving to the desired configuration.
>
>
You need to change only CutName and NewValue with the appropriate name and value that you want to test. This will change at the configuration time the value for the selected cut. Remember to update the default_config dictionary inside the stripping algorithm after arriving to the desired configuration.
  To evaluate the timing, the script creates a copy of all the lines with the name XXX_TIMING to get the real timing consumption by the lines without taking into account the creation of CommonParticles. This is the time that must be under 1ms/event.
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback