Difference: MuonTrainingInfo (1 vs. 2)

Revision 22008-07-23 - AlessioSarti

Line: 1 to 1
 

Welcome to the LHCb Muon Shift Training page

This page contains the basic informations needed to be trained as muon shifter

Line: 11 to 11
 
Added:
>
>

Useful documents

 

Muon System Control

  • Log on the ui01 machine (also other machines are good as well: you just need to see the G:\).
Line: 30 to 34
 
  • Allocate: This is the very first part of the job. At the end of the Allocate procedure the NOT READY state must be reached.
    • If there's an error: recover -> try to recover a single error. reset -> try to reset all the chambers
  • Reset:
Deleted:
<
<
  • Choose the parameters in TFC control.
    • MEP : multi event pack (pack together several consecutive events)
    • To save the changes click on 'Apply display'
    • L0DU is shared with other subdetectors: better to manage it from the main panel. If needed coordinate with other subsystem experts.
    • The TFC control changes can be done in any moment. Just STOP the run, change the parameters and then RESTART the run.
 
  • Activity:
    • This parameter is used to choose the recipes
    • Allowed values: PHYSICS or COSMICS
Line: 42 to 41
 
  • Configure:
    • You issue the configure command and then you cross your fingers. At the end you expect everything blue and 'READY' state.
    • After ready state is reached you can start a run or have fun in other ways.
Added:
>
>
  • Choose the parameters in TFC control.
    • MEP : multi event pack (pack together several consecutive events)
    • To save the changes click on 'Apply display'
    • L0DU is shared with other subdetectors: better to manage it from the main panel. If needed coordinate with other subsystem experts.
    • The TFC control changes can be done in any moment. Just STOP the run, change the parameters and then RESTART the run.
 
  • Start a run:
    • From a READY state: You issue a start, you wait for ACTIVE state and then you 'GO' !
Line: 57 to 61
 
  • Got to the DIM histogram browser panel and select the process (monaxx) you want. Then on mona click with the right button and add checked to the database.
  • Then come back to the 'Online' mode.
Added:
>
>

Creating Recipes

 

Troubleshooting

  • After issuing a configure command I got an ERROR:
    • Try a RECOVER command in the main MUON SYSTEM.
    • If recover does not do the job try to browse the tree until the end of the problem to see if there's anything known.
    • If the error persist but the subsystem is not needed you can exclude it and go on.
Added:
>
>
  • To reset a tell1
    • select the Tell 1 from the Muon main panel going down the tree
    • open putty and log onto the tell1 (Ex. : mutellc02)
    • From the machine: sudo /sbin/service ccserv restart for 2 times. First time you are asked for a pwd. The you should reissue the command.
 

Contactpersons

Revision 12008-07-22 - AlessioSarti

Line: 1 to 1
Added:
>
>

Welcome to the LHCb Muon Shift Training page

This page contains the basic informations needed to be trained as muon shifter



Muon System Control

  • Log on the ui01 machine (also other machines are good as well: you just need to see the G:\).
  • Many users can use the project in parallel
  • The muon project from the top: G:\online\ecs\NewShortcuts\MUON
    • click on : MUSIDES_UI_FSM (shortcut to PVSS project)
    • wait until all the hierarchy is loaded and the main panel appears
    • From this project you can control everything
  • To start using the project: take the lock!
    • Exclude : just exclude the system for the sessions but does not prevent a new take action to take control
    • Exclude and lock out: I exclude the system and I'm not going to take it back later in the current session by a new 'overall' take action

In order to store/control data the HLT, Storage, Monitoring and TFC subsystem should be ok (taken and allocated!).

Basics (normal procedure)

  • Allocate: This is the very first part of the job. At the end of the Allocate procedure the NOT READY state must be reached.
    • If there's an error: recover -> try to recover a single error. reset -> try to reset all the chambers
  • Reset:
  • Choose the parameters in TFC control.
    • MEP : multi event pack (pack together several consecutive events)
    • To save the changes click on 'Apply display'
    • L0DU is shared with other subdetectors: better to manage it from the main panel. If needed coordinate with other subsystem experts.
    • The TFC control changes can be done in any moment. Just STOP the run, change the parameters and then RESTART the run.
  • Activity:
    • This parameter is used to choose the recipes
    • Allowed values: PHYSICS or COSMICS
    • Activity (and save) can be used to customize the current session.
  • Configure:
    • You issue the configure command and then you cross your fingers. At the end you expect everything blue and 'READY' state.
    • After ready state is reached you can start a run or have fun in other ways.
  • Start a run:
    • From a READY state: You issue a start, you wait for ACTIVE state and then you 'GO' !

Monitoring

When acquiring data it is possible to monitor the acquisition.

  • Start putty
    • ssh plus, enable x11 forwarding in the SSH X11 menu (placing the name of the machine you're on)
    • Follow the instructions shown here for the linux approach
  • Go to the 'Page editor' mode
  • Specificare HIST_WRITER (do not log off from DB) to get the permissions to enable histo you want.
  • Got to the DIM histogram browser panel and select the process (monaxx) you want. Then on mona click with the right button and add checked to the database.
  • Then come back to the 'Online' mode.

Troubleshooting

  • After issuing a configure command I got an ERROR:
    • Try a RECOVER command in the main MUON SYSTEM.
    • If recover does not do the job try to browse the tree until the end of the problem to see if there's anything known.
    • If the error persist but the subsystem is not needed you can exclude it and go on.

Contactpersons

  • TMU stuff : L0 people.
  • HLT stuff: Bruno de Paula.

-- AlessioSarti - 22 Jul 2008

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback