Difference: VELOLVClearInterlock (1 vs. 2)

Revision 22008-08-19 - MarkTobin

Line: 1 to 1
 
META TOPICPARENT name="VELOLVBasic"

Clearing an interlock

  1. From the VELOC_DVCS_TB top panel click on the red button.
  2. The following window should appear:
    ELMB_Preoperational.PNG
Added:
>
>


 
  1. Click YES and change the state of the ELMB to PREOPERATIONAL.
  2. The following panel should appear Status_and_Event_Reg_INTERRUPT.PNG
Added:
>
>


 
  1. Click on the button "Check Status"
  2. The panel look something like the following:
    Status_and_Event_Reg_INTERRUPT_TooWarm.PNG
Added:
>
>


 
  1. Click on Send.
  2. Check status again.
  3. Everything should be green.

Revision 12008-04-30 - MarkTobin

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="VELOLVBasic"

Clearing an interlock

  1. From the VELOC_DVCS_TB top panel click on the red button.
  2. The following window should appear:
    ELMB_Preoperational.PNG
  3. Click YES and change the state of the ELMB to PREOPERATIONAL.
  4. The following panel should appear Status_and_Event_Reg_INTERRUPT.PNG
  5. Click on the button "Check Status"
  6. The panel look something like the following:
    Status_and_Event_Reg_INTERRUPT_TooWarm.PNG
  7. Click on Send.
  8. Check status again.
  9. Everything should be green.

-- MarkTobin - 30 Apr 2008

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback