Difference: VELOPowerOnShift (1 vs. 3)

Revision 32008-08-19 - MarkTobin

Line: 1 to 1
 
META TOPICPARENT name="VELOOperatingManuals"

Powering the VELO during Shift

Deleted:
<
<
 During shift we give the VELO to the global commissioning. We retain the High and Low Voltage as we only want VELO experts operating the voltages for the safety of the detector. This will also be true for the Motion and Cooling.
Changed:
<
<
  1. Open the main Velo FSM at G:\online\ecs\Shortcuts\VELO\VEECS1_UI_FSM
>
>
ALERT! If the VELO ECS top panel looks like below then the VELO is configured, control has been handed to the LHCb shift crew and you have nothing to power on: ALERT!
VELO_ECS_TOP_handed_over.PNG

Step 1: open the VELO ECS panel

  1. Open the main Velo ECS FSM at G:\online\ecs\Shortcuts\VELO\VEECS1_UI_FSM
  VELOECS1_UI_FSM.PNG
Changed:
<
<
  1. Right click on Velo and open the top panel
>
>


  1. Right click on VELO and open the top panel
  VELO_TOP.PNG
Added:
>
>


 
  1. Take the project
    TAKE.PNG
Added:
>
>


 
  1. HV and DCS (and currently monitoring) nodes are currently locked out and not under global control
    LockedOutNodes.PNG
Added:
>
>


 
  1. HLT and other resources are currently unallocated.
    VELO_TOP_NOT_ALLOCATED.PNG
Added:
>
>

Step 2: turn on the High Voltage (HV)

 
  1. Click on VELO_HV
    VELO_HV_TOP_OFF.PNG
Changed:
<
<
>
>


 
  1. Currently HV should be off. Click VELOA_HV to go to the A side
    VELOA_HV_TOP_OFF.PNG
Changed:
<
<
>
>


 
  1. Click VELOA_HV_Go_READY from the top menu
    VELOA_HV_Go_READY.PNG
Changed:
<
<
>
>


 
  1. Click SEND_PHYSICS
    SEND_PHYSICS.PNG
Changed:
<
<
>
>


 
  1. The status will change to VELOA_HV_RAMPING_READY
    VELOA_HV_RAMPING_READY.PNG
Changed:
<
<
>
>


 
  1. When the voltage finishes ramping up the status will change to VELOA_HV_READY
    VELOA_HV_READY.PNG
Changed:
<
<
>
>


 
  1. The HV rows on the A side of the summary panel will change to green and look as follows
    Summary_panel_HV_READY.PNG
Added:
>
>


  1. Start from step 1 replacing VELOA with VELOC
 
Added:
>
>

Step 3: turn on the Low Voltage (LV)

 
  1. Return to the Velo top panel and click VELO_DCS_TOP to get the following panel
    VELO_DCS_TOP.PNG
Changed:
<
<
>
>


 
  1. Click on the A side: VELOA_DCS_TOP
    VELOA_DCS_TOP.PNG
Changed:
<
<
>
>


 
  1. Switch on the Low Voltage:
    VELOA_DCS_LV_Switch_ON.PNG
Changed:
<
<
>
>


 
  1. When the voltage is on the panel looks like this:
    VELOA_DCS_LV_TOP_READY.PNG
Changed:
<
<
>
>


 
  1. And the +5V on the LV section on the Summary Panel changes to green and shows the current
    Summary_panel_VELOA_LV_READY.PNG
Changed:
<
<
  1. Repeat all the above HV and LV for the C side and the Summary panel will look like this:
>
>


  1. Repeat for the C side starting from VELOC_DCS_TOP. Th monitoring panel should look like this:
  Summary_panel_LV_READY.PNG
Line: 72 to 84
 
META FILEATTACHMENT attachment="VELOA_DCS_LV_TOP_READY.PNG" attr="" comment="VELOA_DCS_LV_TOP_READY" date="1219081875" name="VELOA_DCS_LV_TOP_READY.PNG" path="VELOA_DCS_LV_TOP_READY.PNG" size="73162" stream="VELOA_DCS_LV_TOP_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="Summary_panel_VELOA_LV_READY.PNG" attr="" comment="Summary_panel_VELOA_LV_READY" date="1219081917" name="Summary_panel_VELOA_LV_READY.PNG" path="Summary_panel_VELOA_LV_READY.PNG" size="85350" stream="Summary_panel_VELOA_LV_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="Summary_panel_LV_READY.PNG" attr="" comment="Summary_panel_LV_READY" date="1219081945" name="Summary_panel_LV_READY.PNG" path="Summary_panel_LV_READY.PNG" size="86570" stream="Summary_panel_LV_READY.PNG" user="Main.KarolHennessy" version="1"
Added:
>
>
META FILEATTACHMENT attachment="VELO_ECS_TOP_handed_over.PNG" attr="" comment="VELO ECS top panel when running in LHCb" date="1219157178" name="VELO_ECS_TOP_handed_over.PNG" path="VELO_ECS_TOP_handed_over.PNG" size="62530" stream="VELO_ECS_TOP_handed_over.PNG" user="Main.MarkTobin" version="1"

Revision 22008-08-18 - unknown

Line: 1 to 1
 
META TOPICPARENT name="VELOOperatingManuals"

Powering the VELO during Shift

During shift we give the VELO to the global commissioning. We retain the High and Low Voltage as we only want VELO experts operating the voltages for the safety of the detector. This will also be true for the Motion and Cooling.

Changed:
<
<
IN PROGRESS

go to the main VELO FSM click dcs click a velo side (both) click lv take control turn on lv release all control do same for other side go back to main panel click hv take control click go_ready (brings it to 100V slowly)

-- KarolHennessy - 15 Aug 2008

>
>
  1. Open the main Velo FSM at G:\online\ecs\Shortcuts\VELO\VEECS1_UI_FSM
    VELOECS1_UI_FSM.PNG
  2. Right click on Velo and open the top panel
    VELO_TOP.PNG
  3. Take the project
    TAKE.PNG
  4. HV and DCS (and currently monitoring) nodes are currently locked out and not under global control
    LockedOutNodes.PNG
  5. HLT and other resources are currently unallocated.
    VELO_TOP_NOT_ALLOCATED.PNG
  6. Click on VELO_HV
    VELO_HV_TOP_OFF.PNG

  1. Currently HV should be off. Click VELOA_HV to go to the A side
    VELOA_HV_TOP_OFF.PNG

  1. Click VELOA_HV_Go_READY from the top menu
    VELOA_HV_Go_READY.PNG

  1. Click SEND_PHYSICS
    SEND_PHYSICS.PNG

  1. The status will change to VELOA_HV_RAMPING_READY
    VELOA_HV_RAMPING_READY.PNG

  1. When the voltage finishes ramping up the status will change to VELOA_HV_READY
    VELOA_HV_READY.PNG

  1. The HV rows on the A side of the summary panel will change to green and look as follows
    Summary_panel_HV_READY.PNG

  1. Return to the Velo top panel and click VELO_DCS_TOP to get the following panel
    VELO_DCS_TOP.PNG

  1. Click on the A side: VELOA_DCS_TOP
    VELOA_DCS_TOP.PNG

  1. Switch on the Low Voltage:
    VELOA_DCS_LV_Switch_ON.PNG

  1. When the voltage is on the panel looks like this:
    VELOA_DCS_LV_TOP_READY.PNG

  1. And the +5V on the LV section on the Summary Panel changes to green and shows the current
    Summary_panel_VELOA_LV_READY.PNG

  1. Repeat all the above HV and LV for the C side and the Summary panel will look like this:
    Summary_panel_LV_READY.PNG

META FILEATTACHMENT attachment="VELOECS1_UI_FSM.PNG" attr="" comment="VELOECS1_UI_FSM" date="1219079929" name="VELOECS1_UI_FSM.PNG" path="VELOECS1_UI_FSM.PNG" size="10549" stream="VELOECS1_UI_FSM.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELO_TOP.PNG" attr="" comment="VELO_TOP" date="1219079990" name="VELO_TOP.PNG" path="VELO_TOP.PNG" size="59944" stream="VELO_TOP.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="TAKE.PNG" attr="" comment="TAKE" date="1219080027" name="TAKE.PNG" path="TAKE.PNG" size="3444" stream="TAKE.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="LockedOutNodes.PNG" attr="" comment="LOCKEDOUTNODES" date="1219080055" name="LockedOutNodes.PNG" path="LockedOutNodes.PNG" size="9657" stream="LockedOutNodes.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELO_TOP_NOT_ALLOCATED.PNG" attr="" comment="VELO_TOP_NOT_ALLOCATED" date="1219080079" name="VELO_TOP_NOT_ALLOCATED.PNG" path="VELO_TOP_NOT_ALLOCATED.PNG" size="63484" stream="VELO_TOP_NOT_ALLOCATED.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELO_HV_TOP_OFF.PNG" attr="" comment="VELO_HV_TOP_OFF" date="1219080106" name="VELO_HV_TOP_OFF.PNG" path="VELO_HV_TOP_OFF.PNG" size="20606" stream="VELO_HV_TOP_OFF.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELOA_HV_TOP_OFF.PNG" attr="" comment="VELOA_HV_TOP_OFF" date="1219081069" name="VELOA_HV_TOP_OFF.PNG" path="VELOA_HV_TOP_OFF.PNG" size="57590" stream="VELOA_HV_TOP_OFF.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELOA_HV_Go_READY.PNG" attr="" comment="VELOA_HV_Go_READY" date="1219081106" name="VELOA_HV_Go_READY.PNG" path="VELOA_HV_Go_READY.PNG" size="59468" stream="VELOA_HV_Go_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="SEND_PHYSICS.PNG" attr="" comment="SEND_PHYSICS" date="1219081138" name="SEND_PHYSICS.PNG" path="SEND_PHYSICS.PNG" size="4996" stream="SEND_PHYSICS.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELOA_HV_RAMPING_READY.PNG" attr="" comment="VELOA_HV_RAMPING_READY" date="1219081164" name="VELOA_HV_RAMPING_READY.PNG" path="VELOA_HV_RAMPING_READY.PNG" size="63636" stream="VELOA_HV_RAMPING_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELOA_HV_READY.PNG" attr="" comment="VELOA_HV_READY" date="1219081187" name="VELOA_HV_READY.PNG" path="VELOA_HV_READY.PNG" size="61495" stream="VELOA_HV_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="Summary_panel_HV_READY.PNG" attr="" comment="Summary_panel_HV_READY" date="1219081207" name="Summary_panel_HV_READY.PNG" path="Summary_panel_HV_READY.PNG" size="83646" stream="Summary_panel_HV_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELO_DCS_TOP.PNG" attr="" comment="VELO_DCS_TOP" date="1219081233" name="VELO_DCS_TOP.PNG" path="VELO_DCS_TOP.PNG" size="21747" stream="VELO_DCS_TOP.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELOA_DCS_TOP.PNG" attr="" comment="VELOA_DCS_TOP" date="1219081258" name="VELOA_DCS_TOP.PNG" path="VELOA_DCS_TOP.PNG" size="21891" stream="VELOA_DCS_TOP.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELOA_DCS_LV_Switch_ON.PNG" attr="" comment="VELOA_DCS_LV_Switch_ON" date="1219081770" name="VELOA_DCS_LV_Switch_ON.PNG" path="VELOA_DCS_LV_Switch_ON.PNG" size="78610" stream="VELOA_DCS_LV_Switch_ON.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="VELOA_DCS_LV_TOP_READY.PNG" attr="" comment="VELOA_DCS_LV_TOP_READY" date="1219081875" name="VELOA_DCS_LV_TOP_READY.PNG" path="VELOA_DCS_LV_TOP_READY.PNG" size="73162" stream="VELOA_DCS_LV_TOP_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="Summary_panel_VELOA_LV_READY.PNG" attr="" comment="Summary_panel_VELOA_LV_READY" date="1219081917" name="Summary_panel_VELOA_LV_READY.PNG" path="Summary_panel_VELOA_LV_READY.PNG" size="85350" stream="Summary_panel_VELOA_LV_READY.PNG" user="Main.KarolHennessy" version="1"
META FILEATTACHMENT attachment="Summary_panel_LV_READY.PNG" attr="" comment="Summary_panel_LV_READY" date="1219081945" name="Summary_panel_LV_READY.PNG" path="Summary_panel_LV_READY.PNG" size="86570" stream="Summary_panel_LV_READY.PNG" user="Main.KarolHennessy" version="1"

Revision 12008-08-15 - unknown

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="VELOOperatingManuals"

Powering the VELO during Shift

During shift we give the VELO to the global commissioning. We retain the High and Low Voltage as we only want VELO experts operating the voltages for the safety of the detector. This will also be true for the Motion and Cooling.

IN PROGRESS

go to the main VELO FSM click dcs click a velo side (both) click lv take control turn on lv release all control do same for other side go back to main panel click hv take control click go_ready (brings it to 100V slowly)

-- KarolHennessy - 15 Aug 2008

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback