Difference: AmsTracker (129 vs. 130)

Revision 1302017-03-09 - MauraGraziani

Line: 1 to 1
 

AMS-02 Silicon Tracker TWiki

The 9 layers of double-sided microstrip detectors of the AMS-02 Silicon Tracker, placed inside and outside the AMS-02 magnet bore, provide charged particle traversing position with an accuracy of about 10 microns on the curvature direction. From the coordinate measurements the particle momentum and charge sign can be reconstructed up to high energies, for a maximum detectable rigidity of approximately 2 TV/c. The Tracker is thermally stabilized by the Tracker Thermal Control System, the TTCS. The TTCS is a two phases cooling system used to remove the 2000W produced by Tracker. If you want a short introduction on the Tracker and TTCS system you can find it here. In this TWiki you will find a description of the Tracker and all the necessary steps needed to operate and check the system.

Line: 49 to 49
 
    1. The Tracker Acquisition System
    2. Tracker Software on POCC
  1. Procedures to Power ON/OFF the Traker
Changed:
<
<
    1. Power ON/OFF a specific ladder or layer
>
>
    1. Power ON/OFF a specific ladder or layer or the whole Tracker
 
    1. Power ON/OFF a specific crate
    2. Automatic procedures in JMDC
  1. Operating the System
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback