Difference: ArlogbTauTrigUpdates (3 vs. 4)

Revision 42011-09-02 - unknown

Line: 1 to 1
 
META TOPICPARENT name="ArloGuneratneBryer"
hlRates for the HT+mu/ele/doubleTau+pfMHT are shown. Rates were evaluated for run 170354 (3e33 config for OHLT).
Line: 51 to 51
 
HLT 0.15+-0.01 0.02+-0.00
Added:
>
>

Backup triggers to SSDL tau analysis triggers in 5e33 menu

Here the rates of the proposed control triggers are shown. The control triggers considered are HT400+Ele5, HT400+DiTau10, HT400+Mu5, PFMHT50+Ele5, PFMHT50+DiTau10, PFMHT50+Mu5, HT400+PFMHT50.

The definitions of the objects used in the triggers are the same as those used in the analysis triggers above. All paths are evaluated using L1_HTT100 as the L1 seed. This may not be optimal for the MHT+Lepton triggers...

HT400+Ele5, HT400+DiTau10 and HT400+Mu5 are run on EleHad, TauPlusX and MuHad samples respectively. HT400+PFMHT50 is run on HT samples. All PFMHT50+Lepton triggers are run on the MET dataset. This follows the datasets I anticipate these triggers would be included into. (Note that the PFMHT + Lepton triggers may be elsewhere - e.g. should PFMHT+DiTau be tested on TauX dataset?).

The rates are evaluated at 3e33.

Total rate is: (1.4 (HT_El) + 2.7 (HT_Mu) + 0.11 (HT_DiTau) + 4.11 (HT_PFMHT) + 0.44 (El_PFMHT) + 1.09 (Mu_PFMHT) + 2.66 (DiTau_PFMHT))*5/3 = 21 Hz.

Assuming we want =< 1Hz:

  • Prescale 2 for HT_DiTau
  • Prescale 5 for El_PFMHT
  • Prescale 20 for HT_El, Mu_PFMHT, HT_Mu
  • Prescale 40 for DiTau_PFMHT, HT_PFMHT

This brings us to around 1Hz...

NB: the DiTau_PFMHT rate is taken from running on the MET dataset rather than the value found running on the TauX dataset (shown below), this provides a more conservative estimate of the total rate.

ElectronHad dataset triggers

Path Name L1 condition L1 Prescale HLT Prescale HLT Rate [Hz] Total Rate [Hz] Avg. Size [MB] Total Throughput [MB/s]
OpenHLT_HT400_Ele5_CaloIdVL_CaloIsoVL_TrkIdVL_TrkIsoVL L1_HTT100 1 1 1.42+-0.03 1.42 0.15 0.21
Total Rate (AlCa not included) [Hz] Throughput (AlCa included) [MB/s]
HLT 1.42+-0.03 0.21+-0.00

MuHad dataset triggers

Path Name L1 condition L1 Prescale HLT Prescale HLT Rate [Hz] Total Rate [Hz] Avg. Size [MB] Total Throughput [MB/s]
OpenHLT_HT400_Mu5 L1_HTT100 1 1 2.70+-0.04 2.70 0.15 0.40
Total Rate (AlCa not included) [Hz] Throughput (AlCa included) [MB/s]
HLT 2.70+-0.04 0.40+-0.01

TauPlusX dataset triggers

Path Name L1 condition L1 Prescale HLT Prescale HLT Rate [Hz] Total Rate [Hz] Avg. Size [MB] Total Throughput [MB/s]
OpenHLT_HT400_DoubleIsoPFTau10_Trk3 L1_HTT100 1 1 0.11+-0.01 0.11 0.15 0.02
OpenHLT_PFMHT50_DoubleIsoPFTau10_Trk3 L1_HTT100 1 1 0.14+-0.01 0.22 0.15 0.03
Total Rate (AlCa not included) [Hz] Throughput (AlCa included) [MB/s]
HLT 0.22+-0.01 0.03+-0.00

HT dataset triggers

Path Name L1 condition L1 Prescale HLT Prescale HLT Rate [Hz] Total Rate [Hz] Avg. Size [MB] Total Throughput [MB/s]
OpenHLT_HT400_PFMHT50 L1_HTT100 1 1 4.11+-0.04 4.11 0.15 0.62
Total Rate (AlCa not included) [Hz] Throughput (AlCa included) [MB/s]
HLT 4.11+-0.04 0.62+-0.01

MET dataset triggers

Path Name L1 condition L1 Prescale HLT Prescale HLT Rate [Hz] Total Rate [Hz] Avg. Size [MB] Total Throughput [MB/s]
OpenHLT_PFMHT50_Ele5_CaloIdVL_CaloIsoVL_TrkIdVL_TrkIsoVL L1_HTT100 1 1 0.44+-0.01 0.44 0.15 0.07
OpenHLT_PFMHT50_Mu5 L1_HTT100 1 1 1.09+-0.02 1.47 0.15 0.22
OpenHLT_PFMHT50_DoubleIsoPFTau10_Trk3 L1_HTT100 1 1 2.66+-0.03 3.56 0.15 0.53
Total Rate (AlCa not included) [Hz] Throughput (AlCa included) [MB/s]
HLT 3.56+-0.04 0.53+-0.01
  -- ArloGuneratneBryer - 30-Aug-2011
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback