Difference: CosmicSimulationSamplesRel14 (1 vs. 45)

Revision 452009-04-16 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Overview

Added:
>
>
 
  • These samples are produced in 14.4.0 AtlasProduction on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
  • What we used for these samples is now included in SimuJobTransforms-00-07-99, which needs tags G4CosmicFilter-00-00-12 and CosmicGenerator-00-00-34.
<!--- Tags for simulation: G4AtlasApps-00-02-87, CosmicGenerator-00-00-31,  InDetSimEvent-00-04-09, G4CosmicFilter-00-00-10, SimuJobTransforms-00-07-86 (and some later updates, see next bullet) -->

Revision 442009-04-08 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 24 to 24
 
  • Muon (all of Atlas, geant volume is MUONQ2::MUONQ2)
  • TRT barrel (geant volume is TRT::BarrelOuterSupport)
  • Pixel barrel (has to have hits inside geant volumes TRT::BarrelOuterSupport and Pixel::Pixel)
Added:
>
>
  • new inner detector volume: (greant volume is OR of TRT::BarrelOuterSupport, TRT::WheelA, TRT::WheelB )
  • new muon volume: (geant volume is CALO::CALO)
 Please note that all subsystems are switched on in all samples; the naming refers just to the filtering on the track direction

Samples

Production with Muon Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • 5000 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.muon_B.70000x.root
where x=1-5
>
>
  • 5000 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.muon_B.70000x.root where x=1-5

  • Test with new muon volume: 1873 events at castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.muonentry.700000.root and dig.muonentry.700005.root
 
ATLAS-GEONF-04-00-00:
  • so far only a few thousand test events. Pixel hit timing not correct for these. Can be found at ~gencomm/w0/cosmicSim_rel14/NoField/dig.muon*.root .
Added:
>
>

Test with new Inner detector volume

  • /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.trt_B.900010.root, dig.trt_B.900014.root, and dig.trt_B.900018.root
 

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
  • 58666 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root

Revision 432009-04-07 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 13 to 13
 
  • Some limitations:
    • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation flux calculation uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)
    • Timing is wrong for the muons, trigger will not work correctly.
Added:
>
>
 

List of geometries used:

  • ATLAS-GEO-03-00-00 (aligned, Solenoid On, Toroids On)

Revision 412009-02-23 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 6 to 6
 
  • These samples are produced in 14.4.0 AtlasProduction on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
  • What we used for these samples is now included in SimuJobTransforms-00-07-99, which needs tags G4CosmicFilter-00-00-12 and CosmicGenerator-00-00-34.
<!--- Tags for simulation: G4AtlasApps-00-02-87, CosmicGenerator-00-00-31,  InDetSimEvent-00-04-09, G4CosmicFilter-00-00-10, SimuJobTransforms-00-07-86 (and some later updates, see next bullet) -->
Deleted:
<
<
  • The new simulation transform is included in 14.5.1.2,AtlasProduction,runtime. Run without arguments for instructions - here is an example anyway:
  csc_cosmics_sim_trf.py outputHitsFile=sim.root maxEvents=10000 randomSeed=1234 geometryVersion=ATLAS-GEONF-04-00-00 CosmicFilterVolume=TRT_Barrel CosmicFilterVolume2=Pixel conditionsTag=OFLCOND-CSC-01-00-00 jobConfig=Cosmics.py
 
  • Tags for digitization: CommissionUtils-00-00-21, PixelDigitization-00-07-13-02, SiDigitization-03-05-04, SCT_Digitization-00-11-13 . jobOptions testdig.py attached.
  • The size of the ATLAS-GEO samples will be ~50k events when first stage finished.
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
Line: 64 to 61
 
  • 55368 events. Files are in /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig/dig.pixelbarrel_B.600*.root
  • The corresponding hits files can be found in the ATLAS-GEO-04-00-00/sim directory
Changed:
<
<

How to run reconstruction:

  • Use release 14.5.0.2,AtlasProduction
  • Check out and compile
    cmt co -r RecExCommission-00-03-94 Reconstruction/RecExample/RecExCommission
  • get JO:
get_files -jo Collisions_ATN.py
  • edit this file with the following
add the lines:
jobproperties.Beam.beamType.set_Value_and_Lock('cosmics')
rec.doTrigger.set_Value_and_Lock(False)
after the importing of the flags.
edit the lines:
<             globalflags.DetDescrVersion.set_Value_and_Lock('ATLAS-Comm-02-00-00')
<             athenaCommonFlags.PoolRDOInput.set_Value_and_Lock( ["/afs/cern.ch/atlas/maxidisk/d17/dig.trtbarrel_ma_B100.root"])
to point to the dataset you want and to set teh DetDescrVersion correctly for that datset.
(you may also have to edit the lines:
            jobproperties.BField.solenoidOn=True
            jobproperties.BField.barrelToroidOn=True
            jobproperties.BField.endcapToroidOn=True
to se the magnetic field configuration correctly).
for simulation made in rel 14 remove the line: 
           SpecialTileConfigHack=True
edit the number of events you want to run over:
athenaCommonFlags.EvtMax.set_Value_and_Lock(500)
  • then run like:
athena -c RTTsim=True Collisions_ATN.py
  • This will run and produce ESD, CBNT. you can configure the job to also produce monitoring histograms, TAG_COMM, Jive xml by adding the appropriate rec flags.
(monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)

Running cosmic sim reco with Reco_trf transform

  • setup 14.5.1.3,AtlasProduction
  • Run transform like:
>Reco_trf.py inputRDOFile=dig.root maxEvents=10 preInclude=RecExCommon/RecoUsefulFlags.py,RecExCommission/CosmicSimulationRecoSetup.py,RecExCommission/RecExCommissionRepro.py,RecJobTransforms/UseOracle.py   outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root  outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root preExec="LArDigitKey='FREE'" --ignoreunknown
  • Can change outputs by changing transform arguments (ie. if you dont give a outputCBNT argument wont get a CBNT) see this wiki for more details on Reco_trf
  • Can change the DetdescrVersion by using preExec="globalflags.DetDescrVersion.set_Value_and_Lock('ATLAS-GEO-03-00-00')" or by editing CosmicSimulationRecoSetup.py - field setup should be autoconfigured by the DetDescrVersion in CosmicSimulationRecoSetup.py
  • If you want to run all monitoring (RAW based and ESD based) all in the RAW step you can add to the JO:
from AthenaMonitoring.DQMonFlags import DQMonFlags
DQMonFlags.monType.set_Value_and_Lock('BSall')
  • Or the above can be added as a preExec - in this case the DQMonFlags are already imported so you can just add:
preExec="LArDigitKey='FREE',DQMonFlags.monType.set_Value_and_Lock('BSall')"
  • This is new so may have bugs - please let me (Jamie Boyd) know if you find some problem...
  • We need the preExec="LArDigitKey='FREE'" part due to a bug in LAr monitoring which gives the error below (LAr experts are working on a fix for this....
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/RecExCommon/RecExCommon_topOptions.py", line 540, in <module>
    protectedInclude ("AthenaMonitoring/DataQualitySteering_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasEvent/14.5.1/InstallArea/jobOptions/AthenaMonitoring/DataQualitySteering_jobOptions.py", line 109, in <module>
    treatException("DataQualitySteering_jobOptions.py: exception when setting up LAr monitoring")
  File "/afs/cern.ch/atlas/software/builds/AtlasEvent/14.5.1/InstallArea/jobOptions/AthenaMonitoring/DataQualitySteering_jobOptions.py", line 107, in <module>
    include("LArMonTools/LArAllMonitoring_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/LArMonTools/LArAllMonitoring_jobOptions.py", line 69, in <module>
    include ("LArMonTools/LArOddCellsMonTool_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/LArMonTools/LArOddCellsMonTool_jobOptions.py", line 24, in <module>
    gainMonitored             = [LArDigitKey,LArDigitKey], # [EM,HEC] ; Monitor only one gain.
NameError: name 'LArDigitKey' is not defined
Py:Athena            INFO leaving with code 8: "an unknown exception occurred"
  • Currently if i try to run BSall monitoring in this step i get:
  File "/afs/cern.ch/atlas/software/builds/AtlasEvent/14.5.1/InstallArea/jobOptions/AthenaMonitoring/DataQualitySteering_jobOptions.py", line 342, in <module>
    include("MuonCombinedDQA/MuonCombinedMonitoring_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonCombinedDQA/MuonCombinedMonitoring_jobOptions.py", line 28, in <module>
    include("MuonCombinedTrackMon/MuonCombinedTrackMon.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonCombinedTrackMon/MuonCombinedTrackMon.py", line 6, in <module>
    include("MuonSelectionTools/MuonConstructionTool.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonSelectionTools/MuonConstructionTool.py", line 44, in <module>
    include("MuonSelectionTools/MuonSelectionTool.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonSelectionTools/MuonSelectionTool.py", line 711, in <module>
    include("TrackIsolationTools/TrackIsolationTool_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasReconstruction/14.5.1/InstallArea/jobOptions/TrackIsolationTools/TrackIsolationTool_jobOptions.py", line 64, in <module>
    TrackSelector               = TrackIsolationTrackSelectorTool)
  File "/build/atnight/localbuilds/nightlies/14.2.2X-VAL/AtlasReconstruction/rel_0/InstallArea/python/TrackIsolationTools/TrackIsolationToolsConf.py", line 27, in __init__
TypeError: unbound method isInToolSvc() must be called with TrackInCaloTools instance as first argument (got nothing instead)
Py:Athena            INFO leaving with code 8: "an unknown exception occurred"
  • Which seems like a bug to me. Have contacted experts to try to get this fixed...

Trying to get digitization running from a transform

  • John Chapman is trying to get cosmic simulation digitization working out of the box in a fixed production release from a transform (so it can be run in production). (thanks John)
  • Currently in 14.5.1.3 AtlasProduction nightlies can run like
csc_digi_trf.py inputHitsFile=rfio:/castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/sim/pixelbarrel_B-400299/sim.root outputRDOFile=test.RDO maxEvents=10 skipEvents=0 geometryVersion=ATLAS-GEO-03-00-00 jobConfig=SimuJobTransforms/CosmicsDigitConfig.py  digiSeedOffset1=0 digiSeedOffset2=0
  • i think this works but it needs to be checked.
>
>

Instructions on how to run simulation / digitization / reconstruction

 
Changed:
<
<

useful info

>
>

other useful info

 
  • we can see how full our castor diskpool is by looking: here our limit is 5TB
Changed:
<
<
-- ElseLytken - 9 Dec 2008
>
>
-- ElseLytken - 23 Feb 2009
 

Revision 402009-02-23 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 102 to 102
 
  • setup 14.5.1.3,AtlasProduction
  • Run transform like:
Changed:
<
<
>Reco_trf.py inputRDOFile=dig.root maxEvents=10 trigStream=IDCosmic preInclude=RecExCommon/RecoUsefulFlags.py,RecExCommission/CosmicSimulationRecoSetup.py,RecExCommission/RecExCommissionRepro.py,RecJobTransforms/UseOracle.py outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root --ignoreunknown
>
>
>Reco_trf.py inputRDOFile=dig.root maxEvents=10 preInclude=RecExCommon/RecoUsefulFlags.py,RecExCommission/CosmicSimulationRecoSetup.py,RecExCommission/RecExCommissionRepro.py,RecJobTransforms/UseOracle.py outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root preExec="LArDigitKey='FREE'" --ignoreunknown
 
Changed:
<
<
  • Not sure if need trigStream
  • Can change outputs by changing transform arguments (ie. if you dont give a outputCBNT argument wont get a CBNT)
>
>
  • Can change outputs by changing transform arguments (ie. if you dont give a outputCBNT argument wont get a CBNT) see this wiki for more details on Reco_trf
 
from AthenaMonitoring.DQMonFlags import DQMonFlags
DQMonFlags.monType.set_Value_and_Lock('BSall')
Added:
>
>
  • Or the above can be added as a preExec - in this case the DQMonFlags are already imported so you can just add:
preExec="LArDigitKey='FREE',DQMonFlags.monType.set_Value_and_Lock('BSall')"
 
  • This is new so may have bugs - please let me (Jamie Boyd) know if you find some problem...
Changed:
<
<
  • I note that in 14.5.1.3 AtlasProduction nightlies this doesnt work if you run monitoring (ie. if you have HIST= as an argument) due to:
>
>
  • We need the preExec="LArDigitKey='FREE'" part due to a bug in LAr monitoring which gives the error below (LAr experts are working on a fix for this....
 
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/RecExCommon/RecExCommon_topOptions.py", line 540, in <module>
    protectedInclude ("AthenaMonitoring/DataQualitySteering_jobOptions.py")
Line: 128 to 131
 NameError: name 'LArDigitKey' is not defined Py:Athena INFO leaving with code 8: "an unknown exception occurred"
Changed:
<
<
  • This needs to be fixed!
>
>
  • Currently if i try to run BSall monitoring in this step i get:
  File "/afs/cern.ch/atlas/software/builds/AtlasEvent/14.5.1/InstallArea/jobOptions/AthenaMonitoring/DataQualitySteering_jobOptions.py", line 342, in <module>
    include("MuonCombinedDQA/MuonCombinedMonitoring_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonCombinedDQA/MuonCombinedMonitoring_jobOptions.py", line 28, in <module>
    include("MuonCombinedTrackMon/MuonCombinedTrackMon.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonCombinedTrackMon/MuonCombinedTrackMon.py", line 6, in <module>
    include("MuonSelectionTools/MuonConstructionTool.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonSelectionTools/MuonConstructionTool.py", line 44, in <module>
    include("MuonSelectionTools/MuonSelectionTool.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasAnalysis/14.5.1/InstallArea/jobOptions/MuonSelectionTools/MuonSelectionTool.py", line 711, in <module>
    include("TrackIsolationTools/TrackIsolationTool_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasReconstruction/14.5.1/InstallArea/jobOptions/TrackIsolationTools/TrackIsolationTool_jobOptions.py", line 64, in <module>
    TrackSelector               = TrackIsolationTrackSelectorTool)
  File "/build/atnight/localbuilds/nightlies/14.2.2X-VAL/AtlasReconstruction/rel_0/InstallArea/python/TrackIsolationTools/TrackIsolationToolsConf.py", line 27, in __init__
TypeError: unbound method isInToolSvc() must be called with TrackInCaloTools instance as first argument (got nothing instead)
Py:Athena            INFO leaving with code 8: "an unknown exception occurred"
  • Which seems like a bug to me. Have contacted experts to try to get this fixed...
 

Trying to get digitization running from a transform

  • John Chapman is trying to get cosmic simulation digitization working out of the box in a fixed production release from a transform (so it can be run in production). (thanks John)
  • Currently in 14.5.1.3 AtlasProduction nightlies can run like

Revision 392009-02-22 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 99 to 99
 (monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)

Running cosmic sim reco with Reco_trf transform

Changed:
<
<
>
>
  • setup 14.5.1.3,AtlasProduction
 
  • Run transform like:
Changed:
<
<
>Reco_trf.py inputRDOFile=dig.root maxEvents=10 trigStream=IDCosmic preInclude=RecExCommon/RecoUsefulFlags.py,CosmicSimulationRecoSetup.py,RecExCommission/RecExCommissionRepro.py,RecJobTransforms/UseOracle.py outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root --ignoreunknown
>
>
>Reco_trf.py inputRDOFile=dig.root maxEvents=10 trigStream=IDCosmic preInclude=RecExCommon/RecoUsefulFlags.py,RecExCommission/CosmicSimulationRecoSetup.py,RecExCommission/RecExCommissionRepro.py,RecJobTransforms/UseOracle.py outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root --ignoreunknown
 
  • Not sure if need trigStream
  • Can change outputs by changing transform arguments (ie. if you dont give a outputCBNT argument wont get a CBNT)
Line: 114 to 113
 DQMonFlags.monType.set_Value_and_Lock('BSall')
  • This is new so may have bugs - please let me (Jamie Boyd) know if you find some problem...
Changed:
<
<
  • I note that in 14.5.X.Y AtlasProduction nightlies this doesnt work if you run monitoring (ie. if you have HIST= as an argument) due to:
>
>
  • I note that in 14.5.1.3 AtlasProduction nightlies this doesnt work if you run monitoring (ie. if you have HIST= as an argument) due to:
 
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/RecExCommon/RecExCommon_topOptions.py", line 540, in <module>
    protectedInclude ("AthenaMonitoring/DataQualitySteering_jobOptions.py")
Line: 132 to 131
 
  • This needs to be fixed!

Trying to get digitization running from a transform

  • John Chapman is trying to get cosmic simulation digitization working out of the box in a fixed production release from a transform (so it can be run in production). (thanks John)
Changed:
<
<
>
>
 
csc_digi_trf.py inputHitsFile=rfio:/castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/sim/pixelbarrel_B-400299/sim.root outputRDOFile=test.RDO maxEvents=10 skipEvents=0 geometryVersion=ATLAS-GEO-03-00-00 jobConfig=SimuJobTransforms/CosmicsDigitConfig.py  digiSeedOffset1=0 digiSeedOffset2=0
Changed:
<
<
  • Still awaiting new tags from Pixel and TRT to get this working properly...
  • Seems to work in 14.5.X.Y, AtlasProduction nightlies with tags:
SCT_Digitization-00-11-13-01
PixelDigitization-00-07-17-01
  • But of course more detailed validation is needed...
>
>
  • i think this works but it needs to be checked.
 

useful info

  • we can see how full our castor diskpool is by looking: here our limit is 5TB

Revision 382009-02-18 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 114 to 114
 DQMonFlags.monType.set_Value_and_Lock('BSall')
  • This is new so may have bugs - please let me (Jamie Boyd) know if you find some problem...
Added:
>
>
  • I note that in 14.5.X.Y AtlasProduction nightlies this doesnt work if you run monitoring (ie. if you have HIST= as an argument) due to:
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/RecExCommon/RecExCommon_topOptions.py", line 540, in <module>
    protectedInclude ("AthenaMonitoring/DataQualitySteering_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/AtlasEvent/14.5.1/InstallArea/jobOptions/AthenaMonitoring/DataQualitySteering_jobOptions.py", line 109, in <module>
    treatException("DataQualitySteering_jobOptions.py: exception when setting up LAr monitoring")
  File "/afs/cern.ch/atlas/software/builds/AtlasEvent/14.5.1/InstallArea/jobOptions/AthenaMonitoring/DataQualitySteering_jobOptions.py", line 107, in <module>
    include("LArMonTools/LArAllMonitoring_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/LArMonTools/LArAllMonitoring_jobOptions.py", line 69, in <module>
    include ("LArMonTools/LArOddCellsMonTool_jobOptions.py")
  File "/afs/cern.ch/atlas/software/builds/nightlies/14.5.X.Y-VAL/AtlasProduction/rel_3/InstallArea/jobOptions/LArMonTools/LArOddCellsMonTool_jobOptions.py", line 24, in <module>
    gainMonitored             = [LArDigitKey,LArDigitKey], # [EM,HEC] ; Monitor only one gain.
NameError: name 'LArDigitKey' is not defined
Py:Athena            INFO leaving with code 8: "an unknown exception occurred"
  • This needs to be fixed!
 

Trying to get digitization running from a transform

  • John Chapman is trying to get cosmic simulation digitization working out of the box in a fixed production release from a transform (so it can be run in production). (thanks John)
  • Currently in 14.5.1.Y AtlasProduction nightlies can run like
Changed:
<
<
csc_digi_trf.py inputHitsFile=rfio:/castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/sim/pixelbarrel_B-400299/sim.root outputRDOFile=test.RDO maxEvents=10 skipEvents=0 geometryVersion=ATLAS-GEO-03-00-00 jobConfig=SimuJobTransforms/CosmicsDigitConfig.py
>
>
csc_digi_trf.py inputHitsFile=rfio:/castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/sim/pixelbarrel_B-400299/sim.root outputRDOFile=test.RDO maxEvents=10 skipEvents=0 geometryVersion=ATLAS-GEO-03-00-00 jobConfig=SimuJobTransforms/CosmicsDigitConfig.py digiSeedOffset1=0 digiSeedOffset2=0
 
  • Still awaiting new tags from Pixel and TRT to get this working properly...
Added:
>
>
SCT_Digitization-00-11-13-01
PixelDigitization-00-07-17-01
  • But of course more detailed validation is needed...
 

useful info

  • we can see how full our castor diskpool is by looking: here our limit is 5TB

Revision 372009-02-16 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 12 to 12
 
  • Tags for digitization: CommissionUtils-00-00-21, PixelDigitization-00-07-13-02, SiDigitization-03-05-04, SCT_Digitization-00-11-13 . jobOptions testdig.py attached.
  • The size of the ATLAS-GEO samples will be ~50k events when first stage finished.
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
Changed:
<
<
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings for the generator can be found in the attached jobOptions_ConfigCosmicProd.py.
>
>
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings for the generator can be found in the attached jobOptions_ConfigCosmicProd.py. Note that the CosmicGenerator settings for pixelbarrel-filtered samples are optimized for pixel studies and may not be appropriate for other detector studies.
 
  • Some limitations:
    • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation flux calculation uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)
Changed:
<
<
    • Timing is wrong for the muons, trigger will not work.
>
>
    • Timing is wrong for the muons, trigger will not work correctly.
 

List of geometries used:

  • ATLAS-GEO-03-00-00 (aligned, Solenoid On, Toroids On)

Revision 362009-02-14 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 114 to 114
 DQMonFlags.monType.set_Value_and_Lock('BSall')
  • This is new so may have bugs - please let me (Jamie Boyd) know if you find some problem...
Added:
>
>

Trying to get digitization running from a transform

  • John Chapman is trying to get cosmic simulation digitization working out of the box in a fixed production release from a transform (so it can be run in production). (thanks John)
  • Currently in 14.5.1.Y AtlasProduction nightlies can run like
csc_digi_trf.py inputHitsFile=rfio:/castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/sim/pixelbarrel_B-400299/sim.root outputRDOFile=test.RDO maxEvents=10 skipEvents=0 geometryVersion=ATLAS-GEO-03-00-00 jobConfig=SimuJobTransforms/CosmicsDigitConfig.py
  • Still awaiting new tags from Pixel and TRT to get this working properly...
 

useful info

  • we can see how full our castor diskpool is by looking: here our limit is 5TB

Revision 352009-02-11 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 103 to 103
 
Changed:
<
<
>Reco_trf.py inputRDOFile=dig.root maxEvents=10 trigStream=IDCosmic preInclude=RecExCommon/RecoUsefulFlags.py,RecExCommission/RecExCommissionRepro.py,CosmicSimulationRecoSetup.py,RecJobTransforms/UseOracle.py outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root --ignoreunknown
>
>
>Reco_trf.py inputRDOFile=dig.root maxEvents=10 trigStream=IDCosmic preInclude=RecExCommon/RecoUsefulFlags.py,CosmicSimulationRecoSetup.py,RecExCommission/RecExCommissionRepro.py,RecJobTransforms/UseOracle.py outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root --ignoreunknown
 
  • Not sure if need trigStream
  • Can change outputs by changing transform arguments (ie. if you dont give a outputCBNT argument wont get a CBNT)

Revision 342009-02-10 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 98 to 98
 
  • This will run and produce ESD, CBNT. you can configure the job to also produce monitoring histograms, TAG_COMM, Jive xml by adding the appropriate rec flags.
(monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)
Added:
>
>

Running cosmic sim reco with Reco_trf transform

>Reco_trf.py inputRDOFile=dig.root maxEvents=10 trigStream=IDCosmic preInclude=RecExCommon/RecoUsefulFlags.py,RecExCommission/RecExCommissionRepro.py,CosmicSimulationRecoSetup.py,RecJobTransforms/UseOracle.py   outputESDFile=myESD.pool.root HIST=myMergedMonitoring.root  outputTAGComm=myTAGCOMM.root outputCBNT=myCommission.ntuple.root --ignoreunknown
  • Not sure if need trigStream
  • Can change outputs by changing transform arguments (ie. if you dont give a outputCBNT argument wont get a CBNT)
  • Can change the DetdescrVersion by using preExec="globalflags.DetDescrVersion.set_Value_and_Lock('ATLAS-GEO-03-00-00')" or by editing CosmicSimulationRecoSetup.py - field setup should be autoconfigured by the DetDescrVersion in CosmicSimulationRecoSetup.py
  • If you want to run all monitoring (RAW based and ESD based) all in the RAW step you can add to the JO:
from AthenaMonitoring.DQMonFlags import DQMonFlags
DQMonFlags.monType.set_Value_and_Lock('BSall')
  • This is new so may have bugs - please let me (Jamie Boyd) know if you find some problem...
 

useful info

  • we can see how full our castor diskpool is by looking: here our limit is 5TB

Revision 332009-02-10 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 31 to 31
 

Samples

Production with Muon Volume

Added:
>
>
ATLAS-GEO-03-00-00:
  • 5000 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.muon_B.70000x.root
where x=1-5
 
ATLAS-GEONF-04-00-00:
  • so far only a few thousand test events. Pixel hit timing not correct for these. Can be found at ~gencomm/w0/cosmicSim_rel14/NoField/dig.muon*.root .

Revision 322009-01-30 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Overview

  • These samples are produced in 14.4.0 AtlasProduction on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
Changed:
<
<
>
>
<!--- Tags for simulation: G4AtlasApps-00-02-87, CosmicGenerator-00-00-31,  InDetSimEvent-00-04-09, G4CosmicFilter-00-00-10, SimuJobTransforms-00-07-86 (and some later updates, see next bullet) -->
  • The new simulation transform is included in 14.5.1.2,AtlasProduction,runtime. Run without arguments for instructions - here is an example anyway:
  csc_cosmics_sim_trf.py outputHitsFile=sim.root maxEvents=10000 randomSeed=1234 geometryVersion=ATLAS-GEONF-04-00-00 CosmicFilterVolume=TRT_Barrel CosmicFilterVolume2=Pixel conditionsTag=OFLCOND-CSC-01-00-00 jobConfig=Cosmics.py
 
  • Tags for digitization: CommissionUtils-00-00-21, PixelDigitization-00-07-13-02, SiDigitization-03-05-04, SCT_Digitization-00-11-13 . jobOptions testdig.py attached.
  • The size of the ATLAS-GEO samples will be ~50k events when first stage finished.
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings for the generator can be found in the attached jobOptions_ConfigCosmicProd.py.
Added:
>
>
  • Some limitations:
 
  • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation flux calculation uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)
Added:
>
>
    • Timing is wrong for the muons, trigger will not work.
 

List of geometries used:

  • ATLAS-GEO-03-00-00 (aligned, Solenoid On, Toroids On)

Revision 312009-01-22 - JoergStelzer

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 57 to 57
 

How to run reconstruction:

  • Use release 14.5.0.2,AtlasProduction
Changed:
<
<
  • Check out and compile
     RecExCommission-00-03-94 
>
>
  • Check out and compile
    cmt co -r RecExCommission-00-03-94 Reconstruction/RecExample/RecExCommission
 
  • get JO:
get_files -jo Collisions_ATN.py

Revision 302009-01-21 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Overview

  • These samples are produced in 14.4.0 AtlasProduction on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
Changed:
<
<
>
>
 
Changed:
<
<
  • The size of the ATLAS-GEO samples will be 50-100k events when finished.
>
>
  • The size of the ATLAS-GEO samples will be ~50k events when first stage finished.
 
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings for the generator can be found in the attached jobOptions_ConfigCosmicProd.py.
  • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation flux calculation uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)
Line: 51 to 52
 
  • The corresponding hits files can be found in the ATLAS-GEONF-04-00-00/hits directory

ATLAS-GEO-04-00-00:
Changed:
<
<
  • Production is about halfway through. Files are in /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig/dig.pixelbarrel_B.600*.root
>
>
  • 55368 events. Files are in /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig/dig.pixelbarrel_B.600*.root
 
  • The corresponding hits files can be found in the ATLAS-GEO-04-00-00/sim directory

How to run reconstruction:

Revision 292009-01-19 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 20 to 20
 
  • Muon (all of Atlas, geant volume is MUONQ2::MUONQ2)
  • TRT barrel (geant volume is TRT::BarrelOuterSupport)
  • Pixel barrel (has to have hits inside geant volumes TRT::BarrelOuterSupport and Pixel::Pixel)
Added:
>
>
Please note that all subsystems are switched on in all samples; the naming refers just to the filtering on the track direction
 

Samples

Production with Muon Volume

Line: 49 to 51
 
  • The corresponding hits files can be found in the ATLAS-GEONF-04-00-00/hits directory

ATLAS-GEO-04-00-00:
Changed:
<
<
  • Production just started. Files are in /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig/dig.pixelbarrel_B.600*.root
>
>
  • Production is about halfway through. Files are in /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig/dig.pixelbarrel_B.600*.root
 
  • The corresponding hits files can be found in the ATLAS-GEO-04-00-00/sim directory

How to run reconstruction:

Revision 282009-01-15 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 42 to 42
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
  • Approx 46k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
Changed:
<
<
>
>
  • The corresponding hits files can be found in the ATLAS-GEO-03-00-00/sim directory
 
ATLAS-GEONF-04-00-00:
Changed:
<
<
  • First 40k events showing up at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.pixelbarrel.500*.root
>
>
  • Approx 48k events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.pixelbarrel.500*.root
  • The corresponding hits files can be found in the ATLAS-GEONF-04-00-00/hits directory
 
ATLAS-GEO-04-00-00:
Changed:
<
<
  • just started
>
>
  • Production just started. Files are in /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig/dig.pixelbarrel_B.600*.root
  • The corresponding hits files can be found in the ATLAS-GEO-04-00-00/sim directory
 

How to run reconstruction:

  • Use release 14.5.0.2,AtlasProduction

Revision 272009-01-14 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 45 to 45
 

ATLAS-GEONF-04-00-00:
Changed:
<
<
  • First ~10k events showing up at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.pixelbarrel.500*.root
>
>
  • First 40k events showing up at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.pixelbarrel.500*.root
 
ATLAS-GEO-04-00-00:
Changed:
<
<
  • not yet
>
>
  • just started
 

How to run reconstruction:

  • Use release 14.5.0.2,AtlasProduction

Revision 262009-01-12 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 84 to 84
 
  • This will run and produce ESD, CBNT. you can configure the job to also produce monitoring histograms, TAG_COMM, Jive xml by adding the appropriate rec flags.
(monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)
Added:
>
>

useful info

  • we can see how full our castor diskpool is by looking: here our limit is 5TB
 -- ElseLytken - 9 Dec 2008

Revision 252009-01-12 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 45 to 45
 

ATLAS-GEONF-04-00-00:
Changed:
<
<
  • First events showing up at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.pixelbarrel.500*.root
>
>
  • First ~10k events showing up at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.pixelbarrel.500*.root
 
ATLAS-GEO-04-00-00:
  • not yet

Revision 232009-01-11 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 28 to 28
 

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • 38596 at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root
>
>
  • 58666 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root
 
  • The corresponding hits files can be found in the ATLAS-GEO-03-00-00/sim directory
Deleted:
<
<
  • Will make 50K events in this config (rest still being made).
 
ATLAS-GEONF-04-00-00:
  • 50327 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel.200*.root
  • The corresponding hits files can be found in the ATLAS-GEONF-04-00-00/hits directory

ATLAS-GEO-04-00-00:
Changed:
<
<
  • some data started to appear in: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig
>
>
  • 57756 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig
 
  • corresponding hits files can be seen in ATLAS-GEO-04-00-00/sim directory

Production with pixel barrel Volume

Revision 222008-12-17 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 42 to 42
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • Approx 40k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
>
>
  • Approx 46k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
 

ATLAS-GEONF-04-00-00:

Revision 212008-12-16 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 37 to 37
 
  • The corresponding hits files can be found in the ATLAS-GEONF-04-00-00/hits directory

ATLAS-GEO-04-00-00:
Changed:
<
<
  • nothing submitted yet
>
>
  • some data started to appear in: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-04-00-00/dig
  • corresponding hits files can be seen in ATLAS-GEO-04-00-00/sim directory
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:

Revision 202008-12-16 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 51 to 51
 
  • not yet

How to run reconstruction:

Changed:
<
<
  • Use release 14.5.0.1,AtlasProduction
>
>
  • Use release 14.5.0.2,AtlasProduction
  • Check out and compile
     RecExCommission-00-03-94 
 
  • get JO:
get_files -jo Collisions_ATN.py
Line: 83 to 84
 
  • This will run and produce ESD, CBNT. you can configure the job to also produce monitoring histograms, TAG_COMM, Jive xml by adding the appropriate rec flags.
(monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)
Deleted:
<
<

Pending issues

  • Seems to be something funny going on with the truth (maybe reco related?) - see bug report 44779 and 44941. Should be ok with InDetRecExample-01-16-07
  • I have seen a rare (one off) crash from MuGirl running reco on the cosmic simulation samples - see bug eport here
 -- ElseLytken - 9 Dec 2008

Revision 192008-12-16 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 41 to 41
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • Approx 30k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
>
>
  • Approx 40k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
 

ATLAS-GEONF-04-00-00:

Revision 182008-12-15 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 41 to 41
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • Approx 20k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
>
>
  • Approx 30k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
 

ATLAS-GEONF-04-00-00:

Revision 172008-12-11 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 28 to 28
 

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • About 27k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root
>
>
  • 38596 at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root
 
  • The corresponding hits files can be found in the ATLAS-GEO-03-00-00/sim directory
Added:
>
>
  • Will make 50K events in this config (rest still being made).
 
ATLAS-GEONF-04-00-00:
  • 50327 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel.200*.root

Revision 162008-12-11 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 40 to 40
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • First few k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
>
>
  • Approx 20k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
 

ATLAS-GEONF-04-00-00:

Revision 152008-12-11 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 50 to 50
 
  • not yet

How to run reconstruction:

Changed:
<
<
  • For now this is for a nightly (devval, rel_3) but this will become 14.5.0 very soon
>
>
  • Use release 14.5.0.1,AtlasProduction
 
  • get JO:
get_files -jo Collisions_ATN.py

Revision 142008-12-10 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 8 to 8
 
  • Tags for digitization: CommissionUtils-00-00-21, PixelDigitization-00-07-13-02, SiDigitization-03-05-04, SCT_Digitization-00-11-13 . jobOptions testdig.py attached.
  • The size of the ATLAS-GEO samples will be 50-100k events when finished.
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
Changed:
<
<
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings to come
>
>
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings for the generator can be found in the attached jobOptions_ConfigCosmicProd.py.
 
  • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation flux calculation uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)

List of geometries used:

Line: 90 to 90
 
Added:
>
>
 
META FILEATTACHMENT attachment="testdig.py.txt" attr="h" comment="example of digitization jobOptions" date="1227172165" name="testdig.py.txt" path="testdig.py" size="7217" stream="testdig.py" user="Main.ElseLytken" version="1"
Added:
>
>
META FILEATTACHMENT attachment="jobOptions_ConfigCosmicProd.py.txt" attr="" comment="Cosmic generator settings" date="1228938562" name="jobOptions_ConfigCosmicProd.py.txt" path="jobOptions_ConfigCosmicProd.py" size="2919" stream="jobOptions_ConfigCosmicProd.py" user="Main.ElseLytken" version="1"

Revision 132008-12-09 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 83 to 83
 (monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)

Pending issues

Changed:
<
<
  • Seems to be something funny going on with the truth (maybe reco related?) - see bug report 44779 and 44941
>
>
  • Seems to be something funny going on with the truth (maybe reco related?) - see bug report 44779 and 44941. Should be ok with InDetRecExample-01-16-07
 
  • I have seen a rare (one off) crash from MuGirl running reco on the cosmic simulation samples - see bug eport here
Changed:
<
<
-- ElseLytken - 27 Nov 2008
>
>
-- ElseLytken - 9 Dec 2008
 

Revision 122008-12-05 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 44 to 44
 

ATLAS-GEONF-04-00-00:
Changed:
<
<
  • test sample in ~gencomm/w0/cosmicSim_rel14/NoField has faulty pixel hit timing
>
>
  • not yet
 
ATLAS-GEO-04-00-00:
Changed:
<
<
  • test sample in ~gencomm/w0/cosmicSim_rel14/ToroidsOnly has faulty pixel hit timing
>
>
  • not yet
 

How to run reconstruction:

  • For now this is for a nightly (devval, rel_3) but this will become 14.5.0 very soon

Revision 112008-12-04 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 40 to 40
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • First ~1k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
>
>
  • First few k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
 

ATLAS-GEONF-04-00-00:

Revision 102008-12-04 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 32 to 32
 
  • The corresponding hits files can be found in the ATLAS-GEO-03-00-00/sim directory

ATLAS-GEONF-04-00-00:
Changed:
<
<
  • 24k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel.200*.root
  • At the moment only files with numbers >= 200400 have the latest pixel digitization settings
>
>
  • 50327 events at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel.200*.root
 
  • The corresponding hits files can be found in the ATLAS-GEONF-04-00-00/hits directory

ATLAS-GEO-04-00-00:
Line: 41 to 40
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • so far only test events: ~gencomm/w0/cosmicSim_rel14/dig.GEO-03.pixelbarrel_B1.root
>
>
  • First ~1k events can be found at: /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.pixelbarrel_B.400*.root
 
ATLAS-GEONF-04-00-00:
  • test sample in ~gencomm/w0/cosmicSim_rel14/NoField has faulty pixel hit timing
Line: 83 to 83
 (monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)

Pending issues

Changed:
<
<
  • Seems to be something funny going on with the truth (maybe reco related?) - see bug report 44779
>
>
  • Seems to be something funny going on with the truth (maybe reco related?) - see bug report 44779 and 44941
 
  • I have seen a rare (one off) crash from MuGirl running reco on the cosmic simulation samples - see bug eport here

-- ElseLytken - 27 Nov 2008

Revision 92008-12-04 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 84 to 84
 

Pending issues

  • Seems to be something funny going on with the truth (maybe reco related?) - see bug report 44779
Changed:
<
<
>
>
  • I have seen a rare (one off) crash from MuGirl running reco on the cosmic simulation samples - see bug eport here
  -- ElseLytken - 27 Nov 2008

Revision 82008-12-03 - JamieBoyd

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 28 to 28
 

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • About 17k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root
>
>
  • About 27k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root
 
  • The corresponding hits files can be found in the ATLAS-GEO-03-00-00/sim directory

ATLAS-GEONF-04-00-00:
Line: 49 to 49
 
ATLAS-GEO-04-00-00:
  • test sample in ~gencomm/w0/cosmicSim_rel14/ToroidsOnly has faulty pixel hit timing
Changed:
<
<
<!------++ How to run reconstruction: 
  • to come (I hope) -->
>
>

How to run reconstruction:

  • For now this is for a nightly (devval, rel_3) but this will become 14.5.0 very soon
  • get JO:
get_files -jo Collisions_ATN.py
  • edit this file with the following
add the lines:
jobproperties.Beam.beamType.set_Value_and_Lock('cosmics')
rec.doTrigger.set_Value_and_Lock(False)
after the importing of the flags.
edit the lines:
<             globalflags.DetDescrVersion.set_Value_and_Lock('ATLAS-Comm-02-00-00')
<             athenaCommonFlags.PoolRDOInput.set_Value_and_Lock( ["/afs/cern.ch/atlas/maxidisk/d17/dig.trtbarrel_ma_B100.root"])
to point to the dataset you want and to set teh DetDescrVersion correctly for that datset.
(you may also have to edit the lines:
            jobproperties.BField.solenoidOn=True
            jobproperties.BField.barrelToroidOn=True
            jobproperties.BField.endcapToroidOn=True
to se the magnetic field configuration correctly).
for simulation made in rel 14 remove the line: 
           SpecialTileConfigHack=True
edit the number of events you want to run over:
athenaCommonFlags.EvtMax.set_Value_and_Lock(500)
  • then run like:
athena -c RTTsim=True Collisions_ATN.py
  • This will run and produce ESD, CBNT. you can configure the job to also produce monitoring histograms, TAG_COMM, Jive xml by adding the appropriate rec flags.
(monitoring histograms fail if the run number changes during the job - which happens with old (<14) simulated cosmics)

Pending issues

  • Seems to be something funny going on with the truth (maybe reco related?) - see bug report 44779
 

-- ElseLytken - 27 Nov 2008

Revision 72008-11-27 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Overview

Changed:
<
<
>
>
 
  • The size of the ATLAS-GEO samples will be 50-100k events when finished.
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings to come
Line: 28 to 28
 

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • About 20k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig.GEO-03-TRTBarrel.*.root
>
>
  • About 17k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig/dig.GEO-03-TRTBarrel.*.root
  • The corresponding hits files can be found in the ATLAS-GEO-03-00-00/sim directory
 
ATLAS-GEONF-04-00-00:
Changed:
<
<
  • 24k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel2*.root
>
>
  • 24k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel.200*.root
  • At the moment only files with numbers >= 200400 have the latest pixel digitization settings
  • The corresponding hits files can be found in the ATLAS-GEONF-04-00-00/hits directory
 
ATLAS-GEO-04-00-00:
  • nothing submitted yet
Line: 46 to 49
 
ATLAS-GEO-04-00-00:
  • test sample in ~gencomm/w0/cosmicSim_rel14/ToroidsOnly has faulty pixel hit timing
Changed:
<
<

How to run reconstruction:

  • to come (I hope)
>
>
<!------++ How to run reconstruction: 
  • to come (I hope) -->
 
Changed:
<
<
-- ElseLytken - 18 Nov 2008
>
>
-- ElseLytken - 27 Nov 2008
 

META FILEATTACHMENT attachment="testdig.py.txt" attr="h" comment="example of digitization jobOptions" date="1227172165" name="testdig.py.txt" path="testdig.py" size="7217" stream="testdig.py" user="Main.ElseLytken" version="1"

Revision 62008-11-21 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 33 to 33
 
ATLAS-GEONF-04-00-00:
  • 24k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel2*.root
Added:
>
>
ATLAS-GEO-04-00-00:
  • nothing submitted yet
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
  • so far only test events: ~gencomm/w0/cosmicSim_rel14/dig.GEO-03.pixelbarrel_B1.root
Added:
>
>
ATLAS-GEONF-04-00-00:
  • test sample in ~gencomm/w0/cosmicSim_rel14/NoField has faulty pixel hit timing

ATLAS-GEO-04-00-00:
  • test sample in ~gencomm/w0/cosmicSim_rel14/ToroidsOnly has faulty pixel hit timing
 

How to run reconstruction:

Added:
>
>
  • to come (I hope)
  -- ElseLytken - 18 Nov 2008

Revision 52008-11-20 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Overview

  • These samples are produced in 14.4.0 AtlasProduction on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
Added:
>
>
 
  • The size of the ATLAS-GEO samples will be 50-100k events when finished.
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings to come
Changed:
<
<
  • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation fluxes uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)
>
>
  • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation flux calculation uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)
 

List of geometries used:

  • ATLAS-GEO-03-00-00 (aligned, Solenoid On, Toroids On)
Line: 22 to 24
 

Samples

Production with Muon Volume

ATLAS-GEONF-04-00-00:
Changed:
<
<
  • so far only a few thousand test events. Can be found at ~gencomm/w0/cosmicSim_rel14/NoField/dig.muon*.root
>
>
  • so far only a few thousand test events. Pixel hit timing not correct for these. Can be found at ~gencomm/w0/cosmicSim_rel14/NoField/dig.muon*.root .
 

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
Line: 38 to 40
 

How to run reconstruction:

-- ElseLytken - 18 Nov 2008

Added:
>
>

META FILEATTACHMENT attachment="testdig.py.txt" attr="h" comment="example of digitization jobOptions" date="1227172165" name="testdig.py.txt" path="testdig.py" size="7217" stream="testdig.py" user="Main.ElseLytken" version="1"

Revision 42008-11-19 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Overview

Changed:
<
<
  • These samples are produced on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
  • Locations are scattered at the moment but we hope to move to new dedicated castor area soon.
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume.
  • More details to come
>
>
  • These samples are produced in 14.4.0 AtlasProduction on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
  • The size of the ATLAS-GEO samples will be 50-100k events when finished.
  • To access the data use STAGE_SVCCLASS=atlasgroupdisk
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume - more details on the settings to come
  • Several questions lately: note that the mu+/mu- ratio in simulation (1.5) is not the same as in data. The simulation fluxes uses this reference: A. Dar , Phys. Rev. Letters 51, 227 (1983)
 

List of geometries used:

  • ATLAS-GEO-03-00-00 (aligned, Solenoid On, Toroids On)
Line: 25 to 26
 

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
Changed:
<
<
  • About 8.5k at /castor/cern.ch/user/j/jboyd/cosmic_sim_nov08/digitization/dig.GEO-03-TRTBarrel.*.root
>
>
  • About 20k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEO-03-00-00/dig.GEO-03-TRTBarrel.*.root
 
ATLAS-GEONF-04-00-00:
Changed:
<
<
  • 24k at /castor/cern.ch/user/l/lytken/cosmic_14/digitization/dig.trtbarrel2*.root
>
>
  • 24k at /castor/cern.ch/grid/atlas/atlasgroupdisk/proj-simcos/rel14/ATLAS-GEONF-04-00-00/dig.trtbarrel2*.root
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:

Revision 32008-11-19 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 28 to 28
 
  • About 8.5k at /castor/cern.ch/user/j/jboyd/cosmic_sim_nov08/digitization/dig.GEO-03-TRTBarrel.*.root

ATLAS-GEONF-04-00-00:
Changed:
<
<
  • About 12k at /castor/cern.ch/user/l/lytken/cosmic_14/digitization/dig.trtbarrel2*.root
>
>
  • 24k at /castor/cern.ch/user/l/lytken/cosmic_14/digitization/dig.trtbarrel2*.root
 

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:

Revision 22008-11-18 - ElseLytken

Line: 1 to 1
 
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Line: 9 to 9
 
  • More details to come

List of geometries used:

Changed:
<
<
  • ATLAS-GEO-03-00-00 (aligned, field on)
  • ATLAS-GEONF-04-00-00 (aligned, no magn fields)
  • ATLAS-GEO-04-00-00 (aligned, solenoid off, toroids on)
>
>
  • ATLAS-GEO-03-00-00 (aligned, Solenoid On, Toroids On)
  • ATLAS-GEONF-04-00-00 (aligned, no magn field)
  • ATLAS-GEO-04-00-00 (aligned, Solenoid off, Toroids On)
 

List of simulation filter volumes used:

  • Muon (all of Atlas, geant volume is MUONQ2::MUONQ2)

Revision 12008-11-18 - ElseLytken

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="CosmicSimulationSamples"

Cosmic Simulation in rel 14: Samples

Overview

  • These samples are produced on the batch system, although simulation step is also available with Simulation/SimuJobTransforms/scripts/csc_cosmics_sim_trf.py
  • Locations are scattered at the moment but we hope to move to new dedicated castor area soon.
  • Two filters: CosmicGenerator constrains the production vertex and direction of generator-level tracks, G4CosmicFilter requires simulated hits inside a certain volume.
  • More details to come

List of geometries used:

  • ATLAS-GEO-03-00-00 (aligned, field on)
  • ATLAS-GEONF-04-00-00 (aligned, no magn fields)
  • ATLAS-GEO-04-00-00 (aligned, solenoid off, toroids on)

List of simulation filter volumes used:

  • Muon (all of Atlas, geant volume is MUONQ2::MUONQ2)
  • TRT barrel (geant volume is TRT::BarrelOuterSupport)
  • Pixel barrel (has to have hits inside geant volumes TRT::BarrelOuterSupport and Pixel::Pixel)

Samples

Production with Muon Volume

ATLAS-GEONF-04-00-00:
  • so far only a few thousand test events. Can be found at ~gencomm/w0/cosmicSim_rel14/NoField/dig.muon*.root

Production with TRT barrel Volume

ATLAS-GEO-03-00-00:
  • About 8.5k at /castor/cern.ch/user/j/jboyd/cosmic_sim_nov08/digitization/dig.GEO-03-TRTBarrel.*.root

ATLAS-GEONF-04-00-00:
  • About 12k at /castor/cern.ch/user/l/lytken/cosmic_14/digitization/dig.trtbarrel2*.root

Production with pixel barrel Volume

ATLAS-GEO-03-00-00:
  • so far only test events: ~gencomm/w0/cosmicSim_rel14/dig.GEO-03.pixelbarrel_B1.root

How to run reconstruction:

-- ElseLytken - 18 Nov 2008

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback