Discussion Forum » General »

Telecon tomorrow (Thursday) @ 5 pm Eastern time

Hi all!

Telecon tomorrow (Jan. 27 in North America, Jan. 28 in Australia) at the regular time: 5 pm Eastern (2 pm Pacific, 11 am Hawaii, 23.00 European, 9 am Eastern Australia). Andrew Macdonald has made a lot of new progress populating and testing our newly-fabricated ALTAIR photodiode readout / transimpedance amplifier boards -- photos will be sent tomorrow! (I have a couple of good photos that I just took now, but Andrew told me he'll be installing even more components in the morning, so I'll get more photos before I send out the progress report!) Additionally, a little bit more progress has been made with operation of the two Raveon M8S 144 MHz transceiver boards. Progress also continues to be made on optical simulation and on measuring electrical characteristics of the photodiode readout. More discussion items for tomorrow's telecon include: flight/telescope plans and tests; construction and lab tests of the new gondolas/payloads; light sources and light source modelling; goniometric and pre- and post-flight calibration; propulsion work; nanosat bus and payload solid models; computing / website / TWiki forums and e-mails; grant applications; and recap of schedules. I'll send a progress report before the telecon tomorrow.

Here's how to connect:

1) Open Skype on your computer (note that of course, you should first install Skype, http://www.skype.com, on your machine if you haven't already).
2) In the "Contacts" menu, add me ( jalbertuvic ) as a contact, if you haven't already.
3) Just wait for me to Skype-call you at the usual time (5 pm Eastern, 2 pm Pacific, etc).
4) If there is any trouble, or if you don't get a Skype-call for some reason and would like to join, please just send me an e-mail (jalbert@uvicNOSPAMPLEASE.ca).

Here's the tentative agenda:

I) Flight & telescope plans, and upcoming tests
II) Construction, drop tests, and other tests of the new gondola and payload
III) Diffused light source and its modelling, pre- and post-flight calibration, and goniometric calibrations
IV) Solid modelling
V) Computing/website, including recent flight control and simulation progress
VI) Grant applications
VII) AOB

Talk to you all tomorrow, thanks!!!
justin

-- Justin Albert - 2022-01-27

Hi all,

My apologies for the delay! -- here's the update on recent ALTAIR balloon work and minutes of today's meeting (attendees Arnold Gaertner [NRC], Liviu Ivanescu [Sherbrooke], and me):

As mentioned in the meeting announcement yesterday, Andrew Macdonald has made a lot of progress populating (and doing cross-checks at each of his population steps) one of our three fabricated ALTAIR photodiode readout / transimpedance amplifier boards. Here are two photographs from yesterday of the partially-populated board:

and one from mid-day today:

The can be compared with the analogous photos from two weeks ago at:

https://twiki.cern.ch/twiki/bin/view/Altair/Forum/ForumGeneral0096

Andrew will, of course, continue populating, and then testing, this board. (And I'll share the continued progress from him at the telecon 2 weeks from today.)

As sharp-eyed viewers may notice, the TWiki links above have all moved from our ALTAIR TWiki's former residence at:

https://wiki.heprc.uvic.ca/twiki/bin/view/Forum/ForumGeneral

to a new ALTAIR TWiki residence at CERN at:

https://twiki.cern.ch/twiki/bin/view/Altair/Forum/ForumGeneral

Our ALTAIR TWiki will thus now be hosted at CERN instead of UVic. (This is because UVic no longer wants to host TWiki sites, due to what some UVic Computing people feel are some security issues with wikis. CERN has a larger computing infrastructure than UVic, of course, and is fortunately quite happy to host our TWiki site [in addition to the many many other physics-oriented TWikis that are hosted at CERN], so we've moved the TWiki forum to CERN. Hopefully this will be entirely transparent for all users -- e.g., I've changed the link near the top of http://projectaltair.org to link to our new CERN TWiki location -- please just let me know if you ever encounter any problems.)

The two 144 MHz Raveon M8S data modem transceivers are still here in my office (together with the LiPoly batteries that power them), and hopefully this weekend I will get a chance to test Colton Broughton's most recent code updates for them, which can be found in:

https://particle.phys.uvic.ca/~jalbert/ALTAIR_M8S_Colton8dec21/

(as compared with his older code within https://particle.phys.uvic.ca/~jalbert/ALTAIR_M8S_Colton17nov21/ ).

Colton Broughton, Sarah Alshamaily, and Will Stokes have also completed installing AIFCOMSS ( https://github.com/ProjectALTAIR/AIFCOMSSwithCUPredictorTest ) on their laptops. I've updated AIFCOMSS to work with the recent Cesium v1.83, as well as the instructions, and they all report success with this update and those instructions. The next two things that we know most definitely will need updating (or, rather, creating) are the station-keeping software for AIFCOMSS, and the online command-handling within the onboard Arduino software -- and I'll also be working on those over the next 2 weeks.

Regarding the latest news on our four Radiometrix SHX1 144 MHz transceiver modules that were returned to us from Radiometrix (following their firmware update to fix the BUSY output):

and the problems that Colton found with them (i.e., that of the 12 radio TX to radio RX permutations between those 4 boards, only 3 of the 12 permutations work, 3 of the other permutations give spotty connections -- e.g. only around 1 out of every 5 characters gets successfully transmitted -- as if one is transmitting and the other is receiving on neighbouring channels, but not the same channel..., and the remaining 6 permutations do not successfully receive any transmitted characters) -- we sent an e-mail to Radiometrix to ask about this over 4 months ago. They then sent back an e-mail a week later asking for more information, and Colton replied to them the next day providing the info (just a query about what logic voltages we were using -- we've being using 5V TTL from our Arduino Megas). Radiometrix has not replied to us since that e-mail reply sent to them 16 weeks ago, and thus I pinged them 14 weeks ago to follow up, and again 9 weeks ago -- and Radiometrix hasn't replied to those yet either. I will be pinging Radiometrix on this yet again next week.

We also still need to test out our new DFRobot SEN0177 payload aerosol monitors that we have here:

I've begun to look some more at MEEP (https://meep.readthedocs.io/en/latest/) for finite-difference time domain (FDTD) simulation of integrating sphere output, but I haven't yet had time to make ALTAIR-relevant significant progress there yet -- I'm hoping to do that in the next couple of weeks. It will be interesting to compare that with ray tracing simulations, when I can get a chance to do that!

Engineering students Josh Gage and Evan Moore found that the "wings" that Josh had found in the laser diode light output distributions:

were due to how the diode was mounted in the heat sink. When the diode is mounted properly and carefully, the wings go away.

We also have our 10 Hamamatsu S12698-01 photodiodes and 3 Thorlabs FDS100-NOCAN photodiodes (those Thorlabs ones have their windows removed) here in Victoria:

I've given them to Evan to try out -- he's taking a few weeks to ramp up, and will produce some linearity, etc., plots from them soon.

The survey-tripod-mounted device to cross-check yaw-pitch-roll information from the gondola (e.g., on days before/after flights) is also constructed now, thanks to Mark Lenckowski -- photo at:

and all that remains to be done is to finish the small fitting between the device and the bottom of the payload. The purchased hardware in it includes both the survey tripod (http://www.cpotools.com/cst-berger-60-alwi20-o-aluminum-tripod-with-quick-release--orange-/cstn60-alwi20-o,default,pd.html), two adjustable angle mounts (http://www.thorlabs.com/thorproduct.cfm?partnumber=AP180), and a rotation mount (https://www.thorlabs.com/thorproduct.cfm?partnumber=RP01). That last fitting to attach (temporarily, pre-or post-flight) the upper adjustable angle mount to the payload landing gear has been started and will be completed here in the next couple weeks.

We're currently revising the draft initial contractual agreement from our colleagues at Globalstar Canada regarding 2 initial SPOT Trace devices (and their service plans) for the educational side-project for the upcoming NATO SPS application, in which classrooms in elementary and high schools could launch company-donated SPOT Traces using party balloons (or a more environmentally-friendly version thereof), and track them to learn more about winds at different levels in Earth's atmosphere.

Houman will send Cordell and/or us updated sections of his master's thesis soon -- that information will be extremely useful to us going forward. Also, Susana and Nathan, it would be very helpful for us all to get the JHU students' final writeup when you have a chance.

Next grant application will be a NATO "Science for Peace and Security" application (together with Australian colleague partners).

Our next telecon will be in 2 weeks from now, on Thurs. Feb. 10.

Cheers, talk in 2 weeks from now -- thanks all!

justin

-- Justin Albert - 2022-01-28

DiscussionTopicForm
Title Telecon tomorrow (Thursday) @ 5 pm Eastern time
Forum ForumGeneral
Topic attachments
I Attachment History Action Size Date Who Comment
JPEGjpg ALTAIR_PartiallyPopulatedNewlyFabricatedTIAPhotodiodeReadoutBoardPhotoOfBack_26jan22.jpg r1 manage 2571.2 K 2022-01-27 - 23:46 JustinAlbert Photograph, taken 26 Jan 2022 by me, of the back of the recently-fabricated, partially populated (by Andrew Macdonald) ALTAIR photodiode readout board (i.e., board containing the transimpedance amplifiers and digitization, as usual)
JPEGjpg ALTAIR_PartiallyPopulatedNewlyFabricatedTIAPhotodiodeReadoutBoardPhotoOfFront_26jan22.jpg r1 manage 2099.5 K 2022-01-27 - 23:45 JustinAlbert Photograph, taken 26 Jan 2022 by me, of the front of the recently-fabricated, partially populated (by Andrew Macdonald) ALTAIR photodiode readout board (i.e., board containing the transimpedance amplifiers and digitization, as usual)
JPEGjpg ALTAIR_PartiallyPopulatedNewlyFabricatedTIAPhotodiodeReadoutBoardPhotoOfFront_27jan22.jpg r1 manage 2360.9 K 2022-01-27 - 23:46 JustinAlbert Photograph, taken 27 Jan 2022 by me, of the front of the recently-fabricated, partially populated (by Andrew Macdonald) ALTAIR photodiode readout board (i.e., board containing the transimpedance amplifiers and digitization, as usual)
Edit | Attach | Watch | Print version | History: r2 < r1 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r2 - 2022-01-28 - JustinAlbert
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    Altair/Forum All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback