(r67) TileMobiDAQAnalysis < AtlasArchive

AtlasArchive Web>TileCal>TileMobiDAQAnalysis (revision 67) (raw view)~~EditAttachPDF~~

%CERTIFY%
<LINK href="/twiki/pub/TWiki/WysiwygPlugin/kuputwiki.css" type=text/css rel=stylesheet><!-- This is the default ATLAS template. 
Please modify it in the sections indicated to create your topic!
If you have any comments/complaints about this template, then please email me:
edward.moyse@cern.ch
-->

<!-- By default the title is the WikiWord used to create this topic !--><!-- if you want to modify it to something more meaningful, just replace %TOPIC% below with i.e "My Topic"!-->
---+!! Analysis of the cosmics data taken in the pit 
%TOC% %STARTINCLUDE% 

---+ Cosmics analysis issues and information 

*For runs > M3 see: [[https://twiki.cern.ch/twiki/bin/view/Atlas/TileCosmicsAnalysis][The new Tile Cosmics Analysis page]]*

---++ Reconstruction in Athena 
All the ntuples with useful data are normally reconstructed and stored on CASTOR immediately after data taking. But if you want to run reconstruction yourself or to play with event display, follow the instructions given at TileMobiDAQReconstruction page. For Atlantis reconstruction details see [[https://twiki.cern.ch/twiki/bin/view/Sandbox/CosmicPulseShapeDisplayAtlantis?template=viewprint]]

---+++ TileCal timing corrections
TileCal timing corrections are currently not in the calibration database but are available for different run ranges as data files, which have to be copied to the reconstruction directory by hand. A list of valid timing corrections can be found [[http://atlas-sw.cern.ch/cgi-bin/viewcvs-atlas.cgi/groups/stockholm/TileCal/LaserTiming/Dskews/RunsAndDskews?view=markup][here]].
The corresponding Tile2007.tdlas and Tile2007.tclas files can be found in the respective subdirectories here:
<verbatim>
/afs/cern.ch/user/n/ngollub/public/timing
</verbatim>

In addition the TileConditions package needs to be told to use calibration files with the "Tile2007" prefix in the reconstruction. This is done by adding the following two lines at the end of the <noautolink>RecExCommission_topOptions.py</noautolink>:
<verbatim>
from TileConditions.TileConditionsConf import TileInfoLoader
TileInfoLoader.CalibFilePrefix = "Tile2007"
</verbatim>
(The default in <noautolink>RecExCommission jobOptions</noautolink> is to use calibration files with the prefix "TileMobi", but no such files exist and thus defaults are loaded.) In order to verify which files are really loaded during running, one could also add
<verbatim>
TileInfoLoader.OutputLevel = DEBUG
</verbatim>
Looking for "Tile2007" in the log file should result in a lot of WARNINGs for non-existing Tile2007.* files, but the files Tile2007.tclas, Tile2007.tdlas and Tile2007.tcfib should be found and loaded. The WARNINGs about the non-existence of the other files can be safely ignored.

---++ Task list 
   * <div class="TML">Task list for calorimeter performance with cosmic ray muons: [[%ATTACHURL%/Task_list_for_calorimeter_performance_studies.ppt][Task_list_for_calorimeter_performance_studies.ppt]]</div>
---++ Summary Talks 
   * <div class="TML">Summary talk from September 2006: [[%ATTACHURL%/TEUSCHER_LAr_week_Combined_LAr_TileCal.ppt][TEUSCHER_LAr_week_Combined_LAr_TileCal.ppt]]</div>
   * <div class="TML">Combined LAr + TileCal Analysis November 2006: [[http://indico.cern.ch/conferenceDisplay.py?confId=8274]]</div>
---++ TileMuonFitter 
   * <div class="TML">Dedicated page on the method, usage and results of this algorithm for cosmic muon track reconstruction from the calorimeter data only.</div>
---++ Towering Mapping in the Cosmic Trigger Boards

For M5 week, the cosmic boards have the following tower mapping.

For top cosmics regions the module ordering is 13, 14, 15, 16, 17, 18, 19, 20, 11, 12, 21, 22. <BR>
For bottom cosmics regions the module ordering is 45, 46, 47, 48, 49, 50, 51, 52, 43, 44, 53, 54.

During M5 the LBA cosmic boards were connected to the Muon Output.

| *Board*| *Scaler 0* |  *Scaler 1* |  *Scaler 2* |  *Scaler 3* |  *Scaler 4* |  *Scaler 5* |  *Scaler 6* |  *Scaler 7* | 
| LBA | T1 | - | T7 | T6 | T5| T4 | T3 | T2 | 
| LBC | T1 | T8  | T7 | T5 | T4 | T3 | T2 | T1 | 
| EBC | T1 | - | - | T6 | T5| T4 | T3 | T2 | 

Where 'T' indicates the tower number within the module. There are eight scalers in the cosmic board per module. The first module on the board has scaler numbers 0-8, the second module numbers 8-15, etc. 

*Note: The mapping was incorrect for some time. The following reflects the mapping previous to M5 (Oct 23th, 2007)*
The towering mapping the cosmic trigger boards should be the same for all regions but bottom LBA and top EBC has a slightly different mapping for reasons that are still under investigation. The current mapping for top/bottom EBA and LBA and top EBC is listed as following. The mapping of LBC and EBC has not yet been verified.

For top cosmics regions the module ordering is 13, 14, 15, 16, 17, 18, 19, 20, 11, 12, 21, 22. <BR>
For bottom cosmics regions the module ordering is 45, 46, 47, 48, 49, 50, 51, 52, 43, 44, 53, 54.

| *Board*| *Scaler 0* |  *Scaler 1* |  *Scaler 2* |  *Scaler 3* |  *Scaler 4* |  *Scaler 5* |  *Scaler 6* |  *Scaler 7* | 
|Top EBA | T1 | - | - | T6 | T5| T4 | T3 | T2 | 
|Bottom EBA | T1 | - | - | T6 | T5| T4 | T3 | T2 | 
|Top LBA | T1 | T8 | T7 | T6 | T5| T4 | T3 | T2 | 
|Bottom LBA | T7 (scaler 8) | T6  | T5 | T4 | T3| T2 | T1 | T8 (scaler 15) | 
|Top EBC (module 13) | T1 | T6 | T5 | T4 | T3| - | - | T2 |
|Top EBC | - | T6 | T5 | T4 | T3| T2 | T1 | - |  

Where 'T' indicates the tower number within the module. There are eight scalers in the cosmic board per module. The first module on the board has scaler numbers 0-8, the second module numbers 8-15, etc. In bottom LBA, tower 7 of LBA45 will appear on scaler 8 which should be LBA46 tower 1 for example. In the last module LBA54, tower 7 and 8 are missing. 

---+TileCal Cosmics runs: used setups and available data
See also the [[https://twiki.cern.ch/twiki/bin/view/Atlas/LArCosmicRunList][LAr cosmic run list.]]
---++ Combined Cosmic Runs in 2007 
---+++ Setup (to be completed)
Easter setup Combined runs with Extended Barrel and LAr barrel and endcaps

Modules in readout:

EBA: 13, 14, 15, 16, 17, 18, 19, 20, 45, 47, 48, 49

LBA: 14, 15, 19, 20, 49, 50, 51, 52

LBC: 15, 16, 17, 18

---+++ Runs taken 
Tilecal only ntuples (and log files) in */castor/cern.ch/user/m/maneira/cosmics/2007/*. Reconstruction was done with 
12.5.0 and tags according to TileMuonFitter#Present_software_structure. 
Runs above 10825 were reconstructed with the athena setup described ReconstructionStatus.

The setup as seen in the ntuple is also given (*A* for *LBA*, *C* for *LBC*, *D* for *EBA*, *E* for *EBC*):
   * *Run 4120*: 
      * Started at 20:18 on April 4, stopped at 8:51 on April 5, ROD problems, 1320 events;
      * C15-C18 D13-D49;
   * *Run 4198*: 
      * Started at 17:08 on April 5, stopped on April 6 at 13:39, 769 events (0.6 /min);
      * A14-A15,A17,A19-A20 A49-A52 C15-C18 D13-D15,D17-D20 D45,D47-D49;
   * *Run 4206*:
      * Started at 14:02 on April 6, stopped on April 7 at 17:41, ROD problems, 1053 events;
      * A14-A15,A17,A19-A20 A49-A52 C15-C18 D13-D15,D17-D20 D45,D47-D49;
   * *Run 4218*:
      * Started at 17:51 on April 7, stopped on April 7 at 22:24, 173 events (0.6 /min);
      * A14-A15,A17,A19-A20 A49-A52 C15-C18 D13-D15,D17-D20 D45,D47-D49;
   * *Run 4220*:
      * Started at 23:18 on April 7, stopped on April 10 at 08:44, 2151 events (0.6 /min);
      * A14-A15,A17,A19-A20 A49-A52 C15-C18 D13-D15,D17-D20 D45,D47-D49;
   * *Run 4504*: 
      * Started at 20:59 on April 13, stopped on April 14 at 00:14, 269 events (1.4 /min);
      * A14-A15,A17,A19-A20 A49-A52 C15-C18 D13-D15,D17-D20;
   * *Run 4509*: 
      * Started at 12:00 on April 14, stopped on April 14 at 14:08, 126 events (1.0 /min);
      * A14-A15,A17,A19-A20 A49-A52 C15-C18 D13-D15,D17-D20;
   * *Run 4510*: 
      * Started at 14:30 on April 14, stopped on April 16 at 09:25, 8555 events (7.5 /min);
      * A14-A15,A17,A19-A20 A49-A52 C15-C18 D13-D15,D17-D20;
   * *Run 6709*: 
      * Started at 10:47 on April 29, stopped on April 30 at 09:35, 4734 events (3.3 /min) (with 12.0.5);
      * A13-A20 A37-A44 C15-C18 D5-D16 D37-D52 D57-D64;

   * *Run 14066*:
      * Started June 29 evening (around 19:30), stopped June 30 around 15:00;
      * EBA only, with revised trigger settings (removed masking of five towers per module) and thresholds; substantial improvement in rate
   * *Run 14110*:
      * Started June 30 evening (around 15:00), stopped July 2 morning (around 10:00?);
      * Same as 14066, added FCAL
  * *Run 14834*:
      * Started at 19:41 on 6.7.2007, stopped 7.7.2007 morning due to ROS errors (12 events/minute);
      * First run with EBA, LBA, LBC, EBC;
      * see attached files: run14834_cellphivseta.eps and run14834_tmfdirvspos.eps


---+++ M3 Week
During M3 were used different triggers paired with the TileCal board trigger. TileCal trigger from EBA+LBA+LBC: 11-22 & 43-54 (8 towers in each barrel and 6 towers in each extended barrel: 8*12*4+6*12*2 = 528 towers able to give triggers) ;

---++++ Run list

Lists already compiled [[https://twiki.cern.ch/twiki/bin/view/Atlas/ReconstructionStatus#M3_data_and_reconstruction_in_Ti][here]]: 
   * *WEEK 1* runs detailed in this linked wiki;
   * *WEEK 2* in the attached *.xls* file in the same wiki;

---++++ Analysis

Looks at these and other runs have been shown (or stored) in:
   *  [[http://indico.cern.ch/conferenceDisplay.py?confId=17069][LAr Cosmics Analysis Meeting]]
   *  [[http://indico.cern.ch/materialDisplay.py?contribId=7&amp;materialId=slides&amp;confId=17696][T4,5 meeting: 13010 vs 1205]]
   *  [[http://indico.cern.ch/conferenceDisplay.py?confId=17555][Offline Commissioning: several talks on M3 Analysis]]
   *  [[http://indico.cern.ch/conferenceDisplay.py?confId=17130][Virtual agenda of M3 analysis progress]]

---++++ General characteristics of analysed runs

   A more detailed information on the runs (to be updated as analysis goes on)  
   * *10825* : 1679 events in 13 hours (2.1 ev/min); 
   * *11000* : 3912 events in 15 hours (4.2 ev/min);

---++ Combined Cosmic Runs in 2006 
---+++ Setup 
   * <div class="TML">Thresholds (mV) 07-oct-06 for coincidence boards: [[%ATTACHURL%/threshold07oct06.ps][threshold07oct06.ps]]</div>
   * <div class="TML">Conversion: 50 mV ~ 2 GeV </div>
      * <div class="TML"><font size="2">5.0 * 4.6 mV/pC * 1.05 pC/GeV = 24.15 mV/GeV <br />where<font size="2">Trigger Boards Gain = 5 ; mv/pC = 4.6 ; pC/GeV for Fit Method = 1.05)</font></font></div>
   * <div class="TML">Description of TileCal trigger word (tower threshold bits): </div>
      * *AUGUST* runs: [[%ATTACHURL%/trigger_word_description.txt][trigger_word_description.txt]]
      * *OCTOBER* runs: [[%ATTACHURL%/October_trigger_word_description.txt ][October_trigger_word_description.txt]]
   * Cabling map between drawers- trigger cables and cosmic boards:
      * [[%ATTACHURL%/Map-trigger-cables-to-cosmic-boards.ppt][Map-trigger-cables-to-cosmic-boards.ppt]]: Map-trigger-cables-to-cosmic-boards.ppt
   * Module Status:
      * Online: http://solans.web.cern.ch/solans/TileOnlineStatus/
      * Offline Team 4-5: http://atlas-php.web.cern.ch/atlas-php/NOVA/TBAnalysis/TileCommAnalysis/version1.3/index.php
   * [[http://pcata007.cern.ch/elog/Commissioning/?mode=full&reverse=0&reverse=1&npp=20&Run=Cosmics][TileCal Commissioning ELOG ]]

---+++ TileCal + LAr information 
   * <div class="TML">ELOG including LAr run list: [[http://pcatlas227.cern.ch:8080/Barrel+Phase+III+Soft%26Analysis/?mode=full&reverse=0&reverse=1&npp=20&Category=Cosmic][http://pcatlas227.cern.ch:8080/Barrel+Phase+III+Soft%26Analysis/?mode=full&amp;reverse=0&amp;reverse=1&amp;npp=20&amp;Category=Cosmic]]</div>
   * <div class="TML">LAr cosmics analysis Wiki: [[LArCosmicMuonAnalysis][https://twiki.cern.ch/twiki/bin/view/Atlas/LArCosmicMuonAnalysis]]</div>
---+++ TileCal + Muon system 
   * <div class="TML">Job options [[MuonCommRecoInstructions][https://twiki.cern.ch/twiki/bin/view/Atlas/MuonCommRecoInstructions]] </div>
   * <div class="TML">Muon Analysis wiki: [[MuonCommSoftware#Reconstruction_of_cosmic_data_wi][https://twiki.cern.ch/twiki/bin/view/Atlas/MuonCommSoftware#Reconstruction_of_cosmic_data_wi]]</div>


---+++ List of combined LARG+Tile, where to find the data 
The raw data files endup on the online machine pc-lar-ros-mbl-03 in directory: /tmp/ExpertWeek/data 

In CASTOR they are stored in /castor/cern.ch/atlas/LargFec/BarrelP3C/ 

---++ Cosmic Runs in 2005 
---+++ Ntuples ready for analysis 
<li>You can get reconstructed root files for runs on /castor/cern.ch/user/t/tilebeam/cosmics/jun05 and july05. These were made using pmt ordering and not channel ordering, so the data arrays are named A13, C45 and so on. No correction was made for the double or triple-gain runs, so you should see double or triple the energy. Here's a list of runs, with info taken from http://pcata007.cern.ch:8080/mobidaq/. 

We are in the process of understanding the July 2005 data. Please see/edit TileMobiCosmicAnalysisJuly05 for a list of current issues. 

September 2005 Cosmics runs: 
   * Run 3036 back-to-back trigger, variable threshold, MobiDAQ readout, 114 events, nominal PMT gain
   * Run 3037 back-to-back trigger, variable threshold, MobiDAQ readout, 40 K events, nominal PMT gain
   * Run 3038 back-to-back trigger, variable threshold, MobiDAQ readout, 31 K events, nominal PMT gain, no LBC13
   * Run 3039 back-to-back trigger, variable threshold, MobiDAQ readout, 40 K events, nominal PMT gain, LBC13 included in run
   * Run 3048 single-tower trigger, variable threshold, MobiDAQ readout, 300K events, nominal PMT gain
   * Run 3072 single-tower trigger, variable threshold, MobiDAQ readout, 300K events, nominal PMT gain
   * Run 3074 back-to-back trigger, variable threshold, MobiDAQ readout, 150 events, nominal PMT gain
   * Run 3225 back-to-back trigger, ROD + MobiDAQ readout, 99 events
   * Run 3232 back-to-back trigger, ROD + MobiDAQ readout, 3154 events
   * Run 3233 back-to-back trigger, ROD + MobiDAQ readout, 26374 events
   * Run 3244 back-to-back trigger, ROD + MobiDAQ readout, 7155 events, TDAQ errors by L1ID jumps in ROD
   * Run 3252 back-to-back trigger, ROD + MobiDAQ readout, 5669 events, HV off at the end of the run
   * Run 3265 back-to-back trigger (threshold 33 mV), ROD + MobiDAQ readout, 21243 events
   * Run 3306 single-tower, variable threshold, 15 Hz, ROD + MobiDAQ readout, 500K events, nominal PMT gain, HV on in modules LBA49 and LBC17 only

July 2005 Cosmics runs: 
   * Run 2005 back-to-back trigger, variable threshold (see file below cosmics7-29.dat), 30 events, <nop>MobiDAQ
   * Run 2006 back-to-back trigger, variable threshold, 110 events, <nop>MobiDAQ
   * Run 2007 back-to-back trigger, variable threshold, 17 events, <nop>MobiDAQ, ROS event fragment
   * Run 2015 back-to-back trigger, variable threshold, <nop>MobiDAQ,
   * Run 2016 back-to-back trigger, variable threshold, long run, <nop>MobiDAQ
   * Run 2018 back-to-back trigger, variable threshold, <nop>MobiDAQ
   * Run 2021 back-to-back trigger, variable threshold, <nop>MobiDAQ, fixed L1ID problem in full event
   * Run 2119 back-to-back trigger, variable threshold, ROD partition
   * Run 2120 back-to-back trigger, variable threshold, ROD partition
   * Run 2140 back-to-back trigger, variable threshold, long run, ROD partition
   * Run 2143 back-to-back trigger, variable threshold, ROD partition
   * Run 2145 back-to-back trigger, variable threshold, ROD partition, correct ROD data format from here on
   * Run 2147 back-to-back trigger, variable threshold, ROD partition, correct ROD data format, but BCID errors observed

September 2005 CIS runs: 
   * Run 3031 monoCIS 40k events, MobiDAQ readout
   * Run 3032 CIS scan 40k events, MobiDAQ readout
   * Run 3061 monoCIS 40K events, MobiDAQ readout
   * Run 3064 CIS scan 35K events, MobiDAQ readout

July 2005 CIS runs: 
   * Run 2002 monoCIS 40k events, cap=100pF dac=200, full event number always 0
   * Run 2003 monoCIS 40k events, cap=5.2pF dac=100, full event number always 0
   * Run 2004 CIS run 35k events, full event number always 0
   * Run 2009 monoCIS 40k events, cap=100pF dac=200, event numbers fixed
   * Run 2010 monoCIS 40k events, cap=5.2pF dac=100, event numbers fixed
   * Run 2011 CIS run 35k events, event numbers fixed

September 2005 Pedestal runs: 
   * Run 3030 - pedestals, 40k events, bigain, MobiDAQ readout
   * Run 3060 - pedestals, 40k events, bigain, MobiDAQ readout
   * Run 3237 - pedestals, 40k events, bigain, ROD + MobiDAQ readout, EB errors, BCID errors observed
   * Run 3245 - pedestals, 40k events, bigain, ROD + MobiDAQ readout, EB errors, BCID errors observed
   * Run 3247 - pedestals, 40k events, bigain, ROD + MobiDAQ readout
   * Run 3249 - pedestals, 26934 events, bigain, ROD + MobiDAQ readout
   * Run 3251 - pedestals, 34123 events, bigain, ROD + MobiDAQ readout, BCID errors observed
   * Run 3253 - pedestals, 40k events, bigain, ROD + MobiDAQ readout, EB errors, BCID errors observed

July 2005 Pedestal runs: 
   * Run 2008 - pedestals, 10k events, bigain

June 2005 Cosmics runs: 
   * Run 1108 is back-to-back, 35mv threshold, 45C no HV, 500 events (likely noise)
   * Run 1109 is single-tower triggered (50 mV, 2.0 GeV), nominal gain, about 12 hours (?)
   * Run 1110 Cosmics back-to-back, 84 events, threshold ?
   * Run 1114 is back-to-back tower triggered (threshold 38 mV, 1.5 GeV), nominal gain, 14 hours
   * Run 1126 is back-to-back tower triggered (threshold 38 mV, 1.5 GeV), 2*nominal gain, no 45A, 160 events
   * Run 1134 is back-to-back tower triggered (threshold 38 mV, 1.5 GeV), triple gain, 3115 events, almost 64 hours

June 2005 CIS runs: 
   * Run 1102 10k events
   * Run 1105 monoCIS 2k events
   * Run 1112 35 k events, no module LBC45
   * Run 1154 monoCIS 1k events, trigger word, LBC45C, LBC46, LBA46
   * Run 1155 CIS run 35k events, trigger word, LBC45C, LBC46, LBA46

June 2005 Pedestal runs: 
   * Run 1106 - pedestals, high gain only, 2000 events
   * Run 1113 - pedestal run, 35K events, no module LBC45
---

---++ Summary of July 2005 Expert Week 
---+++ LVPS 
Three working finger power supply assemblies were used on bottom modules (LBA49, 50, 52) over several days pedestals, CIS, cosmics. The LVPS assembly for LBA51 failed and was replaced by an external supply. The reasons for the failure are being investigated. 

Installation of LVPS assemblies in fingers requires special care to avoid restricting cooling. 

Several LVPS assemblies passed QC at Prevessin but failed in UX15. Again, the reasons are being investigated. Future tests in Prevessin should be with long cables to include capacitance, delays, etc. 

On LBA50, the +15 V MB brick tripped at 9:49PM on Sat. 30.07.05 and was restarted successfully at 10:41PM on 31.07.05. This voltage is only used for charge injection. Earlier trips like this appeared to be associated with application of HV but this one was not associated with HV activity. The -15V HV brick on LBA50 went out of regulation from 14:33 to 18:18 on 29.7.05. 

Electronics noise from pedestal run (Run 2008) a. Module High gain Low gain Dead ch#[0] LVPS b. A49 1.47 0.63 - new c. A50 1.50 0.63 - new d. A51 1.17 0.48 8 (low?) old e. A52 (HV off) 1.43 0.65 - new w cores f. C17 1.23 0.54 25 old g. C18 1.24 0.51 - old h. C19 1.14 0.51 - old i. C20 1.15 0.51 - old 

---+++ ROD 

One ROD successfully tested to work in the LBC partition together with a TBM. Stand-alone mode with injected fake data no errors. Successfully integrated ROD in the online software 01-02-00. Combined partition to start both MobiDAQ and ROD segments. Many changes applied to the DSP code in order to get readable output data for the offline. 

Could not upgrade monitoring applications on time for cosmic runs. Linkage errors with one of the fibres from the FE (FragId 0x130). Combined event building problems (smp kernel or network failure + wrong BCID because of fragment loss in fibre 0x130). Data from the last run corrupted since HV trip. 

---+++ Front-End Electronics 

C17 Pulse shape of channel 26 (25 counting from 0) low gain problem: all zeroes, both for monoCIS and pedestals. High gain looks fine. Likely a hardware problem in a digitizer? 

---+++ HV 
Constant overcurrent tripped state on 1 module (52A) Wild current fluctuations on 1 module (50A) o Verified with 2 different LV supplies (old+new) One trip at end (49A) after 3 days 

---+++ DAQ 
bug found in DAQ software, resulting in event number always zero for some of the data. 

---+++ HLT 
first use of event filter in PC 

---+++ Cooling 
Heater failed in cooling unit on C-side, replaced with temporary heater, part on order (end August). System ran stably throughout the data taking. 

---+++ DCS 
Difficult to recover from power cut / reset DCS to racks Need better on-line monitoring of LV, HV a. LVPS assembly monitoring is good but not integrated with external LV supplies, HV, Temperatures, or run data base b. Work needed on sense-line readout for MB voltages 

---+++ Offline 
Need to store HV values read from drawer during run into database 

---+ Example event displays 
See attached files at bottom. 



%STOPINCLUDE% 

   * Cosmic Run 7814 event 475. Example of a shower candidate: <br />
<img width="690" alt="cosmic__7814_00475.gif" src="%ATTACHURLPATH%/cosmic__7814_00475.gif" height="718"></img> 

   * [[%ATTACHURL%/October_trigger_word_description.txt][October_trigger_word_description.txt]]: Description of TileCal trigger word (tower threshold bits)

   * [[%ATTACHURL%/October_trigger_word_description.txt][October_trigger_word_description.txt]]: October_trigger_word_description.txt


<!--Please add the name of someone who is responsible for this page (probably you!) so that they can be contacted if the content needs updating!-->%RESPONSIBLE% Main.SanyaSolodkov %BR% 
<!--Once this page has been reviewed, please add the name and the date e.g. Main.StephenHaywood - 31 Oct 2006 -->%REVIEW% </li>
<!-- MAJOR UPDATES
For significant updates to the topic, consider adding your 'signature' (beneath this editing box) !-->
---
*Major updates*:%BR% <!--Future editors should add their signatures beneath yours!-->-- Main.SanyaSolodkov - 14 Jun 2005 -- Main.maneira - 21 Jun 2005 -- Main.SanyaSolodkov - 03 Aug 2005 -- Main.JoseManeira - 17 Apr 2007

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who	Comment
jpg	JiveXML_1114_00000-win_R-proj_LegoPlot-2005-06-22-09-19-38.jpg	r1	manage	132.7 K	2005-07-11 - 09:15	RichardTeuscher	Cosmic ray run 1114 example 1
png	JiveXML_1114_00005-win_R-proj_LegoPlot-2005-06-22-09-28-19.png	r1	manage	29.9 K	2005-07-11 - 09:19	RichardTeuscher	Cosmic ray run 1114 example 2
png	JiveXML_1114_00006-win_R-proj_LegoPlot-2005-06-22-09-28-51.png	r1	manage	29.8 K	2005-07-11 - 09:16	RichardTeuscher	Cosmic ray run 1114 example 4
png	JiveXML_1114_00011-win_R-proj_LegoPlot-2005-06-22-09-29-46.png	r1	manage	29.9 K	2005-07-11 - 09:20	RichardTeuscher	Cosmic ray run 1114 example 4
doc	July2005cabling.doc	r1	manage	24.0 K	2005-08-05 - 13:46	RichardTeuscher	Trigger Cabling July 2005
ppt	Map-trigger-cables-to-cosmic-boards.ppt	r1	manage	70.5 K	2006-10-20 - 18:07	ChristopheClement
txt	October_trigger_word_description.txt	r1	manage	1.0 K	2006-10-27 - 19:51	UnknownUser	Description of TileCal trigger word (tower threshold bits)
ppt	TEUSCHERCosmicRayExpertWeekJuly2005Setup.ppt	r1	manage	61.0 K	2005-08-04 - 09:58	RichardTeuscher	Setup for July 2005 Cosmic Ray Expert Week
ppt	TEUSCHERCosmicRayExpertWeekSeptember2005.ppt	r1	manage	56.5 K	2005-09-26 - 13:43	RichardTeuscher	September 2005 Expert Week Layout
ppt	TEUSCHER_LAr_week_Combined_LAr_TileCal.ppt	r1	manage	2671.0 K	2006-10-19 - 14:51	RichardTeuscher	Summary talk from September 2006
ppt	Task_list_for_calorimeter_performance_studies.ppt	r1	manage	39.5 K	2006-10-19 - 12:36	RichardTeuscher	Task list for calorimeter performance with cosmic ray muons
png	cosmic__2147_00253-win_S-proj_YX-2005-08-02-15-42-30.png	r1	manage	29.8 K	2005-08-03 - 15:37	RichardTeuscher	Cosmics with Finger LVPS and ROD Readout Example 2
png	cosmic__2147_00291-win_S-proj_YX-2005-08-02-15-44-16.png	r1	manage	29.7 K	2005-08-03 - 15:36	RichardTeuscher	Cosmics with Finger LVPS and ROD Readout
gif	cosmic__7814_00475.gif	r1	manage	25.0 K	2006-09-05 - 11:15	UnknownUser	Cosmic Run 7814 event 475. Example of a shower candidate
gif	cosmic__7814_01023.gif	r1	manage	24.4 K	2006-09-05 - 11:11	UnknownUser	Cosmic Run 7814 event 1023. A Catastrophic energy loss example
dat	cosmics7-29.dat	r1	manage	4.7 K	2005-08-04 - 18:53	RichardTeuscher	July 2005 Trigger Coincidence board thresholds
pdf	module_cabling_26-09-20051.pdf	r1	manage	15.4 K	2005-09-26 - 13:37	RichardTeuscher	September 2005 Module Cabling
eps	run14834_cellphivseta.eps	r1	manage	37.9 K	2007-07-11 - 12:38	JoseManeira	Phi:Eta Cell distribution for run 14834 (first with all partitions)
eps	run14834_tmfdirvspos.eps	r1	manage	19.6 K	2007-07-11 - 12:39	JoseManeira	Track verticality versus z position for run 14834 (first all 4 partitions)
ps	threshold07oct06.ps	r1	manage	58.4 K	2006-10-17 - 16:45	RichardTeuscher	Thresholds (mV) 07-oct-06 for coincidence boards
doc	threshold2.doc	r2 r1	manage	50.0 K	2005-09-26 - 15:02	RichardTeuscher	Coincidence Board Trigger Words and Threshold Settings September 2005
dat	threshold_single_tower.dat	r1	manage	9.0 K	2005-09-27 - 15:28	RichardTeuscher	Approximate thresholds for single tower trigger September 2005 (not modified for hot channels)
ppt	thresholds.ppt	r1	manage	107.0 K	2005-09-26 - 15:03	RichardTeuscher	Plots of Coincidence Board Thresholds September 2005
txt	trigger_word_description.txt	r1	manage	0.9 K	2006-10-19 - 14:58	RichardTeuscher	Description of TileCal trigger word (tower threshold bits)
ppt	triggerboards.ppt	r1	manage	182.0 K	2005-08-05 - 13:44	RichardTeuscher	Documentation on Chicago Coincidence Boards

Topic revision: r67 - 2007-10-23 - MonicaDunford

AtlasArchive

Public webs

- Cern Search
- TWiki Search
- Google Search
Atlas All webs

Copyright &© 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback