This is the expert panel for the setup of the Datapoint structure and the FSM building of the first time. Since the datapoits are created and the FSM is built, this panel is not to be used anymore. The project should go through the export ATLAS DCS projects procedure.

This panel on the left displays the mdt chambers to be entered in the front end electronics system. Since the chambers are selected (and finally all chambers should be seected to have a fully working project) the user has to choose the appropriate actions. Firstly the "Plag chambers in Supervisor PC" button should be pressed and will create the datapoints that represent the chambers inside the project. When the chambers are in, the user can continue pressing the button "MDT ELTX create chamber dp" . This action will create all the important information for the representation of the chamber inside the FSM. (The base stracture and the datapoint types should already have been created).

-- CharilaosTsarouchas - 24 Oct 2008