Here a compilation of tile calorimeter figures published in past papers, useful when preparing your slides and proceedings. All figures from published papers are public and can be used in conference slides/proceedings.

For your information a list of all tile calorimeter publications publications is maintained at this location .

Figures from past publications

Readiness Paper (Eur. Phys. J. C 70 (2010) 1193-1236)

Physics signal pulse shapes used as reference for the Optimal Filtering weights calculation. The pulse shapes are slightly different for high-gain and low-gain, they were obtained with testbeam data.

Reference: CERN-PH-EP-2010-024
Date: May 2010
A cut-away drawing of the ATLAS inner detector and calorimeters. Tile Calorimeter consists of one barrel and two extended barrel sections and surrounds the LAr barrel electromagnetic and endcap hadronic calorimeters.

Reference: Figure 1
Flow diagram of the readout signal path of the difference TileCal calibration tools. The paths are partially overlapping, allowing for cross-checks and an easier identification of component failures

Reference: Figure 12

Detector Reference Figures and Schematics from Atlas Detector Paper (2008 Jinst 3 S08003)

A complete archive of the figures in this paper is available here
Schematic showing how the mechanical assembly and the the optical readout of the tile calorimeter are integrated together. The various components of the optical readout, namely the tiles, the fibres and the photomultipliers, are shown.

Contact: James Proudfoot
Date: 2008
Ref: Figure 5.9 Correction The original figure was incorrect, since Cs pipes run through the holes at the higher radii in each tile. Corrected figure uploaded (T.Davidek)

Azimuthal view of the tile-calorimeter module-to-module interface showing the bearing locations at the inner and outer radii, and the azimuthal gap with a nominal width at the inner radius of 1.5mm, in which the readout fibres are routed to the photomultipliers inside the girder.

Contact: James Proudfoot
Date: 2008
Ref: Figure 5.10

Radial view, looking inwards towards the interaction point, showing the fibre routing in the barrel modules. The fibre shown outside the channel accepts the light for the tile onto which it is pressed. Further along the channel, this fibre is routed through a slot in the channel, into the interior region, while one of the other fibres is routed outside to view the next series of scintillator tiles in depth.

Contact: James Proudfoot
Date: 2008
Ref: Figure 5.11

Segmentation in depth and in $\eta$ of the tile-calorimeter modules in the central (left) and extended (right) barrels. The bottom of the picture corresponds to the inner radius of the tile calorimeter. The tile calorimeter is symetric about the interaction point at the origin.

The colored version was added in 2019 by Henric.

Contact: James Proudfoot
Date: 2008
Ref: Figure 5.12


[color EPS]

Block diagram of the tile-calorimeter readout electronics.

Contact: James Proudfoot
Date: 2008
Ref: Figure 5.39


Cesium monitoring system for the ATLAS Tile Hadron Calorimeter (NIM A494 pp381-384,2002)

Calibration data treatment. The accuracy of a single tile response value is close to 1.8%.

Contact: Jenya Starchenko
Date: 2002
Ref: Figure 6

Technical Design Report

Conceptual diagram of signal path for the Tile Calorimeter and calibration entry points (see text for definitions of the functions L and Q).

Contact: Ilias Efthymiopoulos
Date: 1996
Ref: Figure 7-1

Mechanical concept of the source calibration system.

Contact: Ilias Efthymiopoulos
Date: 1996
Ref: Figure 7-5

Major updates:
-- HenricWilkens - 09-Aug-2013

Responsible: HenricWilkens
Subject: public

Topic attachments
I Attachment History Action Size Date Who Comment
PNGpng CDD-Slide2.png r1 manage 83.7 K 2013-08-09 - 09:52 HenricWilkens  
Unknown file formateps Calorimeter_d3.eps r1 manage 3375.0 K 2016-03-17 - 11:22 TomasDavidek  
PDFpdf Calorimeter_d3.pdf r1 manage 106.7 K 2016-03-17 - 11:22 TomasDavidek  
PNGpng Calorimeter_d3.png r1 manage 907.0 K 2016-03-17 - 11:15 TomasDavidek Calorimeter 3D view
PNGpng FE-Slide1new.png r1 manage 145.5 K 2013-08-09 - 10:31 HenricWilkens  
PDFpdf FIG234.pdf r1 manage 16.0 K 2013-08-09 - 11:23 HenricWilkens  
PNGpng FIG234.png r1 manage 143.7 K 2013-08-09 - 11:23 HenricWilkens  
JPEGjpg Fig6.jpg r1 manage 392.9 K 2013-08-09 - 11:37 HenricWilkens  
PNGpng Profile.png r1 manage 34.9 K 2013-08-09 - 10:08 HenricWilkens  
PNGpng TileCal_Cells_and_Rows2.png r1 manage 32.6 K 2013-08-09 - 10:08 HenricWilkens  
Unknown file formateps TileCal_Cells_and_Rows_color.eps r1 manage 30.1 K 2019-03-22 - 10:03 HenricWilkens  
PNGpng TileCal_Cells_and_Rows_color.png r1 manage 99.2 K 2019-03-22 - 10:03 HenricWilkens  
PNGpng TileCal_Module3.png r1 manage 50.5 K 2013-08-09 - 10:16 HenricWilkens  
Unknown file formateps TileCal_Module4.eps r1 manage 63.2 K 2016-08-29 - 22:21 TomasDavidek  
PDFpdf TileCal_Module4.pdf r1 manage 18.5 K 2016-08-29 - 22:21 TomasDavidek  
PNGpng TileCal_Module4.png r1 manage 58.6 K 2015-01-21 - 15:27 TomasDavidek  
GIFgif cal-clrs.gif r2 r1 manage 6.9 K 2013-08-09 - 14:41 HenricWilkens  
GIFgif cal-prin.gif r1 manage 12.7 K 2013-08-09 - 13:57 HenricWilkens  
Unknown file formateps calib_scheme.eps r1 manage 116.0 K 2016-03-17 - 11:22 TomasDavidek  
PDFpdf calib_scheme.pdf r1 manage 13.7 K 2016-03-17 - 11:22 TomasDavidek  
PNGpng calib_scheme.png r1 manage 18.5 K 2016-03-17 - 11:24 TomasDavidek Basic signal path scheme

This topic: AtlasPublic > Atlas > DataPreparation > ApprovedDetectorPlots > ApprovedPlotsTile > PublishedTilecalFigures
Topic revision: r9 - 2019-05-24 - HenricWilkens
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback