CERN 2022-06 Combined SiW ECAL 15 SLABs and AHCAL
First test of the full 15 layer stack at CERN, with the full AHCAL.
This page is a copy of
SiWCERN201809.
It can be edited by the members of the
Main.SiWCERN201809Group .
Organisation
Responsabilities & Contacts
Admin
Vincent Boudry +33 6 7131 0577,
SiW -ECAL Contact:
Roman Poeschl +33 6 68 50 16 28 +
Adrián Irles +
Vincent Boudry + Taikan Suehara
AHCAL contacts:
Katja Krueger +
Jiri Kvasnicka
Technical Coordinator:
Adrián Irles +
Jiri Kvasnicka
Shift coordinator:
Vincent Boudry
GLIMOS:
Vincent Boudry +33 6 7131 0577,
Roman Poeschl Katja Krueger
e-group of TB-participants:
CALICE-SIW-ECAL-AHCAL-BT-CERN2022-06@cernNOSPAMPLEASE.ch (
Management link
)
Elog
Elog
SiWECAL and AHCAL hosted at DESY
Documentation
Admin chore
- CERN Registration procedure:
- Pre-Arrival: Follow step-by-step (1 to 4 at least) on this page: What I need to do
(before arrival)
- Needed documents, Forms, Requested Safety courses. Everything is on that page.
First step: get your documents and ask your group leader to make a Pre-Registration PRT
(the form can be started and shared with the incumbent for easier filling).
⚠ It might take some days for things to get through ⚠
- The proper radio-protection course is the one for the Supervised area (see below).
- Full procedure: User's office procedure for Users and Visiting scientists
- Once registered, you can already ask for access to the Control Room on either:
- 1) EDH
> Access Demand (top line):
- Search by Access point (right, in the middle), and type 887-1-B81
Select the only choice (0887-1-B81 SALTO ), and again (0887-1-B81 Control Room HNA383).
- Give the date of the stay ±1 day (7/6 – 23/6), and the reason (beam test in PPE 172)
- 2) Adams3
- with other information (card validity, etc).
- On arrival: The access card and dosimeter offices are in building 55-R-001 at the entrance.
Opening hours are:7h30–17h30 for the access cards, but 8h30-12:00 for dosimeters.
A valid dosimeter is the key for the beam test area.
- North Area Instructions
Lodging and Mobility
To go to Prevessin, you can:
Take the shuttle:
https://sce-dep.web.cern.ch/cern-shuttle-service
https://sce-dep.web.cern.ch/mobility/shuttle/circuit-5
Rent a bike:
https://sce-dep.web.cern.ch/mobility/bike-rental
Everything is there:
https://sce-dep.web.cern.ch/campus-life/mobility
including the information about the shuttle to/from the airport.
Planning
Admin documents are on the
CERNBOX (use this link to edit docs)
SHIFTS
CERN2022 Shift Instructions to be updated
Materials & Logistics
Talks, proceedings and papers
W.I.P
Commissioning
Data that is necessary for the commissioning is located in the eos folder below.
/eos/project/s/siw-ecal/TB2022-06/commissioning
Slabs commissioned
Layer Position |
SLAB |
SLB- ID |
SLB-Add |
ASU type |
Wafer (μm) |
W (mm) |
0 |
34 |
15 |
0 |
FEV13 |
650 |
4.2 |
1 |
37 |
28 |
1 |
FEV13 |
650 |
4.2 |
2 |
36 |
18 |
2 |
FEV13 |
650 |
4.2 |
3 |
38 |
12 |
3 |
FEV13 |
500 |
4.2 |
4 |
35 |
16 |
4 |
FEV13 |
650 |
4.2 |
5 |
39 |
25 |
5 |
FEV13 |
500 |
4.2 |
6 |
29 |
22 |
6 |
COB |
500 |
4.2 |
7 |
30 |
19 |
7 |
FEV12 |
500 |
4.2 |
8 |
33 |
20 |
8 |
COB |
500 |
4.2 |
9 |
31 |
17 |
9 |
FEV12 |
500 |
5.6 |
10 |
19 |
13 |
10 |
FEV11 |
320 |
5.6 |
11 |
18 |
2 |
11 |
FEV11 |
320 |
5.6 |
12 |
23 |
6 |
12 |
FEV10 |
320 |
5.6 |
13 |
40 |
27 |
13 |
FEV13 |
320 |
5.6 |
14 |
17 |
10 |
14 |
FEV11 |
320 |
5.6 |
Passports
Passports are contained in
this file.
Calibration constants (pedestals and MIP)
Calibration files is in the
attachement file. (Taken 03/06/2022)
Pictures of slabs (before installation at CERN)
Taken at 21 Jun at CERN
Full Setup
W.I.P.
Settings
All files (only txt please) to be stored at /eos/project/s/siw-ecal/TB2022-06/calibration/setting_files
following the convention there described and updating the README after every time it corresponds.
Physics program
Analysis
Analysis page
--
AdrianIrles - 2018-06