Preshower bulk leakage current measurements

Abstract: Plots of the Preshower bulk leakage current measurements vs time and integrated LHC luminosity for data taken during 2011 and early 2012. Comparisons to predictions from a FLUKA simulation are also shown.

CDS entry

iCMS entry

Figure Caption
pdf version
es fig1.png
The FLUKA package was used to simulate particle rates across the whole CMS detector. The particle fluence was derived from the Monte Carlo simulation using events generated by DPMJET3. The radiation damage to silicon from each particle is scaled to the damage from a 1 MeV neutron, based on known bulk damage behavior properties

The calculated fluence has a maximum at R = 45 cm (eta ~ 2.6) corresponding to a value of 4.531011 n/cm2 for 1 fb-1 of data.
pdf version
es fig2.png
Measured volume leakage current and integrated luminosity as a function of time calculated for 1 cm3 of silicon at a distance of 45.0 cm from the beam line. Data from 2011 and early 2012 is used.
pdf version
es fig3.png
Volume leakage current measured as a function of the distance from the beam axis, after an integrated luminosity of 6.17 fb-1.

The solid line indicates the expected values based on Fluka simulations and calculations of the Hamburg model for 0 C. The measurements were carried out at 18.9 C, but the data are converted to the equivalent currents at 0 C. Points far from the blue line are due to sensors with excess surface currents.
pdf version
es fig4.png
Ratio of the measured to calculated sensor leakage current. The 5 events with a ratio above 1.3 are believed to come from sensors suffering from excess surface currents. The mean value and the rms refer to the Gaussian fit. The plot includes sensors from one specific producer only.
pdf version
es fig5.png
Current measured on 2 high voltage channels supplying 28 and 7 sensors for channels 1 and 2, respectively, as a function of time. The open symbols represent the calculated current as a function of time based on the Hamburg model. The calculated current was scaled to the current measured for each channel on October 29, 2011, at the end of the proton run.
pdf version
es fig6.png
Ratio of the measured to calculated leakage current for the 8 high voltage channels, for multiple measurements performed in 2011. The Gaussian fit gives and a mean of 0.97 and an rms of 0.03.
Topic attachments
I Attachment History Action Size Date Who Comment
PDFpdf es_fig1.pdf r1 manage 13.1 K 2013-07-11 - 17:20 ToyokoOrimoto  
PNGpng es_fig1.png r1 manage 14.7 K 2013-07-11 - 17:20 ToyokoOrimoto  
PDFpdf es_fig2.pdf r1 manage 32.7 K 2013-07-11 - 17:20 ToyokoOrimoto  
PNGpng es_fig2.png r1 manage 21.8 K 2013-07-11 - 17:20 ToyokoOrimoto  
PDFpdf es_fig3.pdf r1 manage 51.0 K 2013-07-11 - 17:20 ToyokoOrimoto  
PNGpng es_fig3.png r1 manage 27.1 K 2013-07-11 - 17:20 ToyokoOrimoto  
PDFpdf es_fig4.pdf r1 manage 14.8 K 2013-07-11 - 17:20 ToyokoOrimoto  
PNGpng es_fig4.png r1 manage 16.2 K 2013-07-11 - 17:20 ToyokoOrimoto  
PDFpdf es_fig5.pdf r1 manage 18.8 K 2013-07-11 - 17:20 ToyokoOrimoto  
PNGpng es_fig5.png r1 manage 22.5 K 2013-07-11 - 17:20 ToyokoOrimoto  
PDFpdf es_fig6.pdf r1 manage 15.0 K 2013-07-11 - 17:21 ToyokoOrimoto  
PNGpng es_fig6.png r1 manage 17.5 K 2013-07-11 - 17:21 ToyokoOrimoto  
Edit | Attach | Watch | Print version | History: r1 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r1 - 2013-07-11 - ToyokoOrimoto
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    CMSPublic All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback