Top PAG Reference Selection Configurations

Complete: 4

TIP This documentation refers to TopQuarkAnalysis/Configuration in CMSSW_5_3_16_patch1)
Installation recipes and older releases and CVS tags are found in the release notes.

Contents:

Introduction

General Information Sources for the User

Concepts

Configuration Organisation

Usage

Documentation

User Job Steering UPDATED

This section describes the constants offered to user for easy steering of the PAT tuple creation.

The descriptions are given regardless of the appearance of the parameters in single example configurations. Not all described constants are available resp. usable in every configuration.

Data or MC?

Configuration Parameter Constants

  • runOnMC ( boolean ):
    general switch to run the configuration on:
    • True: real data input;
    • False: MC input.

Remarks

Selection Steps

Configuration Parameter Constants

  • useTrigger ( boolean ):
    general switch to apply analysis specific trigger selection.
  • useGoodVertex ( boolean ):
    general switch to apply selection on primary vertex quality

  • useGoodMuon ( boolean ):
    general switch to require the existance of a good muon.
  • useMuonVeto ( boolean ):
    general switch to apply a veto on an additional muon.

  • useElectronVeto ( boolean ):
    general switch to apply a veto on an additional electron.

  • use1Jet ( boolean ):
    general switch to require at least one good jet fulfilling a tight pt cut.
  • use2Jets ( boolean ):
    general switch to require at least two good jets fulfilling a tight pt cut.
  • use3JetsTight ( boolean ):
    general switch to require at least three good jets fulfilling a tight pt cut.
  • use3JetsLoose ( boolean ):
    general switch to require at least three good jets fulfilling a loose pt cut.
  • use4Jets ( boolean ):
    general switch to require at least four good jets fulfilling a very loose pt cut.
  • use6JetsLoose ( boolean ):
    general switch to require at least six good jets.
  • use6JetsTight ( boolean ):
    general switch to require at least six good jets with variably increased pt cuts.

  • addTriggerMatching ( boolean ):
    general switch to apply trigger matching according to the trigger selection.

Remarks

Reference Selection UPDATED

Configuration Parameter Constants UPDATED

  • muonCut ( string ): UPDATED
    cut string defining generally good standard muons to be considered for signal and veto;
    default : 'isPFMuon && (isGlobalMuon || isTrackerMuon) && pt > 10. && abs(eta) < 2.5 && (chargedHadronIso+max(0.,neutralHadronIso+photonIso-0.50*puChargedHadronIso))/pt < 0.2'
  • signalMuonCut ( string ): UPDATED
    cut string defining standard signal muons;
    default : 'isPFMuon && isGlobalMuon && pt > 26. && abs(eta) < 2.1 && globalTrack.normalizedChi2 < 10. && track.hitPattern.trackerLayersWithMeasurement > 5 && globalTrack.hitPattern.numberOfValidMuonHits > 0 && abs(dB) < 0.2 && innerTrack.hitPattern.numberOfValidPixelHits > 0 && numberOfMatchedStations > 1 && (chargedHadronIso+max(0.,neutralHadronIso+photonIso-0.50*puChargedHadronIso))/pt < 0.12'
  • muonVertexMaxDZ ( double ):
    maximum distance between muon vertex and primary vertex in z;
    default : 0.5

  • jetCut ( string ):
    cut string defining good calorimeter jets;
    default : 'pt > 20. && abs(eta) < 2.5 && numberOfDaughters > 1 && neutralHadronEnergyFraction < 0.99 && neutralEmEnergyFraction < 0.99 && (chargedEmEnergyFraction < 0.99 || abs(eta) > 2.4) && (chargedHadronEnergyFraction > 0. || abs(eta) >= 2.4) && (chargedMultiplicity > 0 || abs(eta) >= 2.4)'=
  • veryLooseJetCut ( string ):
    cut string defining signal jets on top of jetCut.
  • looseJetCut ( string ):
    cut string defining signal jets on top of jetCut.
  • veryLooseJetCut ( string ):
    cut string defining signal jets on top of jetCut.

  • electronCut ( string ): UPDATED
    cut string defining generally good standard electrons to be considered for signal and veto;
    default : 'pt > 20. && abs(eta) < 2.5 && electronID("mvaTrigV0") > 0. && (chargedHadronIso+max(0.,neutralHadronIso+photonIso-1.0*userIsolation("User1Iso")))/et < 0.15'

Trigger

  • triggerSelectionData ( string ):
    logical expression defining the trigger event selection on data.
  • triggerObjectSelectionData ( string ):
    logical expression selecting trigger objects for trigger matching according to the trigger event selection on data.
  • triggerSelectionMC ( string ):
    logical expression defining the trigger event selection on Monte Carlo.
  • triggerObjectSelectionMC ( string ):
    logical expression selecting trigger objects for trigger matching according to the trigger event selection on Monte Carlo.

Remarks

TIP These configuration parameters are commented in the example configuration files, and their values do not necessarily reflect the default settings, which are defined elsewhere.

Reconstruction

Configuration Parameter Constants

  • muonsUsePV ( boolean ):
    switch to correct the muon for the primary vertex; beam spot is used instead, if set to False;
    default : False
  • muonEmbedTrack ( boolean ):
    switch to embed the track used in the muon reconstruction into the PAT muon;
    default : True

Remarks

Particle Flow

Configuration Parameter Constants

  • postfix ( string ):
    string to distinguish the particle flow products from standard products.

  • usePFnoPU ( boolean ):
    switch to remove pile-up contributions before the muon reconstruction;
    TIP determines also the correct set of jet energy corrections to be used.
  • usePfIsoLessCHS ( boolean ):
    switch to use new pile-up subtraction in PF isolation calculations;
    • True: uses new, optimised pile-up subtraction for isolation calculations (default in CMSSW_5_2_X)
    • False: uses original pile-up subtraction for isolation calculations
  • useNoMuon ( boolean ):
    switch to remove muon contributions before the electron reconstruction.
  • useNoElectron ( boolean ):
    switch to remove electron contributions before the jet reconstruction.
  • useNoJet ( boolean ):
    switch to remove jet contributions before the tau reconstruction.
  • useNoTau ( boolean ):
    switch to remove tau contributions before the MET reconstruction.

  • pfVertices ( string ):
    label of vertex collection to be used;
    default : 'goodOfflinePrimaryVertices'
  • pfD0Cut ( float ):
    max. transverse impact parameter for leptons with respect to primary vertex;
    default : 0.2
  • pfDzCut ( float ):
    max. longitudinal impact parameter for leptons with respect to primary vertex;
    default : 0.5
  • pfMuonSelectionCut ( string ):
    cut string defining muons to be kept for top projections;
    default : 'pt > 5.'
  • useMuonCutBasePF ( bool ):
    switch to apply loosest (veto) muons selection cut muonCutPF on top of pfMuonSelectionCut already at PF2PAT level, which influences the top projections.
  • muonCutPF ( string ): NEW
    cut string defining generally good standard muons to be considered for signal and veto in PFBRECO, applied on top of default PFBRECO selection;
    default : 'pt > 10. && abs(eta) < 2.5
    (isolation cut applied separately)
  • pfMuonIsoConeR03 ( bool ):
    switch cone size for the determination of the muon isolation to 0.3 (current PF2PAT default: 0.4);
    default : False
  • pfMuonCombIsoCut ( float ):
    max. relative combined isolation for a muon to be kept;
    default : 0.2
  • pfElectronSelectionCut ( string ):
    cut string defining electrons to be kept;
    default : 'pt > 5. && gsfTrackRef.isNonnull && gsfTrackRef.trackerExpectedHitsInner.numberOfLostHits < 2'
  • useElectronCutBasePF ( bool ):
    switch to apply loosest (veto) electrons selection cut electronCutPF on top of pfElectronSelectionCut already at PF2PAT level, which influences the top projections.
  • electronCutPF ( string ): NEW
    cut string defining generally good standard electrons to be considered for signal and veto in PFBRECO, applied on top of default PFBRECO selection;
    default : 'pt > 20. && abs(eta) < 2.5'
    (isolation and ID cut applied separately)
  • pfElectronIsoConeR03 ( bool ):
    switch cone size for the determination of the electron isolation to 0.3 (current PF2PAT default: 0.4);
    default : True
  • pfElectronCombIsoCut ( float ):
    max. relative combined isolation for an electron to be kept for top projections;
    default : 0.2

Remarks

ALERT! The postfix parameter must not be equal to jetAlgo + 'PF'.

Jet Energy Corrections UPDATED

Configuration Parameter Constants

  • useL1FastJet ( boolean ):
    switch to add L1FastJet corrections to the PAT jets.
    ALERT! Jet areas have to be recalculated for jets collections from the standard work flows. For most input datasets, this is not possible for calo jets due to missing input, so that they are switched to use L1Offset corrections automatically, if useRelVals is set to False.
  • useL1Offset ( boolean ):
    switch to add L1Offset corrections to the PAT jets.
  • useL2Relative ( boolean ):
    switch to add L2Relative corrections to the PAT jets.
  • useL3Absolute ( boolean ):
    switch to add L3Absolute corrections to the PAT jets.
  • useL2L3Residual ( boolean ):
    switch to add L2L3Residual corrections to the PAT jets in data only.
  • useL5Flavor ( boolean ):
    switch to add L5Flavor corrections to the PAT jets. ALERT! not available for 2012 JEC
  • useL7Parton ( boolean ):
    switch to add L7Parton corrections to the PAT jets. ALERT! not available for 2012 JEC

Remarks UPDATED

ALERT! L1FastJet and L1Offset corrections cannot be used simultaneously.

ALERT!_L1Offset_ is not available in the most recent jet correction payloads.

TIP If L3Absolute or L2L3Residual corrections are used, the PAT jets will be corrected to these levels automatically. The correction factors accessible through the PAT jets will be recalculated accordingly.
Otherwise, they will remain uncorrected.

Input

Configuration Parameter Constants

  • useRelVals ( boolean ):
    switch to use automatically retrieved release validation files of the current release;
    TIP input files are determined considering the runOnMC parameter.
  • inputFiles ( vector of strings ):
    list of input files.
  • maxEvents ( integer ):
    maximum number of events;
    setting this to -1 means all.

Remarks

TIP If useRelVals is set to True, inputFiles will be ignored.

Conditions

Configuration Parameter Constants

  • globalTagData ( string ):
    global tag used on data;
    default : 'FT53_V21A_AN6::All'
  • globalTagMC ( string ):
    global tag used on Monte Carlo;
    default : 'START53_V27::All'

Remarks

Output

Configuration Parameter Constants

  • outputFile ( string ):
    name of the output EDM file.
  • fwkReportEvery ( integer ):
    define frequency of log messages showing the job's advance.
  • wantSummary ( boolean ):
    switch to add trigger and time report to the end of the job's log output.

Remarks

Command Line Arguments NEW

Configuration parameters

Following parameters can be steered by passing command line arguments to the configuration:

  • runOnMC (bool):
    configure for running on MC input?; default: True.
  • maxEvents (int):
    maximum number of events to process; default: -1 (all).
  • outputFile (string):
    name of EDM output file; default differs depending on configuration file.

Examples

  • Run semi-muonic example configuration on all events with real data input:
    cmsRun TopQuarkAnalysis/Configuration/test/patRefSel_muJets_cfg.py runOnMC=False
  • Run hadronic example configuration on 1000 events with MC input and user-defined output file name:
    cmsRun TopQuarkAnalysis/Configuration/test/patRefSel_muJets_cfg.py maxEvents=1000 outputFile=myOutput.root

Release Notes UPDATED

The versions given refer to the the tag of the CMSSW/TopQuarkAnalysis/Configuration package..
The CMSSW versions given refer to the inclusion of the according code into the release cycle. The actual tag in CMSSW is possibly a later/different one.

CMSSW_5_3_16_patch1 UPDATED

TIP This is, what this version of the documentation refers to!

Change Log

  • Move CSC halo filter to more appropriate location (backport)

Installation Recipe

Show  Hide  
ssh lxplus5.cern.ch
cmsrel CMSSW_5_3_16_patch1
cd CMSSW_5_3_16_patch1/src
cmsenv
git cms-addpkg TopQuarkAnalysis/Configuration
git cms-merge-topic cms-analysis-tools:5_3_16_patch1-updateTopRefSel
git cms-addpkg EgammaAnalysis/ElectronTools
cd EgammaAnalysis/ElectronTools/data
cat download.url | xargs wget
cd -
scram b -j 20

Older Tags

Show older tags  Hide older tags 

CMSSW_5_3_13 UPDATED

TIP This tag is documented in this version of this TWiki!

Change Log

  • GIT transition of recipe, incl. policy changes for package repositories.
  • Update to most recent CMSSW_5_3_X release.
  • Switch on base selection for leptons in PFBRECO.
  • Use EA/rho corrections for electrons.

Installation Recipe

Show  Hide  
ssh lxplus5.cern.ch
cmsrel CMSSW_5_3_13
cd CMSSW_5_3_13/src
cmsenv
git cms-addpkg TopQuarkAnalysis/Configuration
git cms-addpkg EgammaAnalysis/ElectronTools
git cms-merge-topic cms-analysis-tools:5_3_13-updateTopRefSel
cd EgammaAnalysis/ElectronTools/data
cat download.url | xargs wget
cd -
scram b -j 20

V07-00-04 (CMSSW_5_3_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Update of recommended MET filters.

Installation Recipes

CMSSW_5_3_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_3_11
cd CMSSW_5_3_11/src
cmsenv
addpkg TopQuarkAnalysis/Configuration
addpkg TopQuarkAnalysis/TopSkimming V07-01-04
addpkg TopQuarkAnalysis/TopTools    V06-07-13
cvs co -r V03-03-11-01    DataFormats/METReco
cvs co -r V04-06-09-02    JetMETCorrections/Type1MET
cvs co -r V00-00-08       RecoMET/METAnalyzers
cvs co -r V15-02-06       RecoParticleFlow/PFProducer
cvs co -r V00-00-30-01 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V07-00-03 (CMSSW_5_3_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Update to CMSSW_5_3_X.

Installation Recipes

CMSSW_5_3_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_3_5
cd CMSSW_5_3_5/src
cmsenv
cvs co -r V07-00-03    TopQuarkAnalysis/Configuration
cvs co -r V07-01-04    TopQuarkAnalysis/TopSkimming
cvs co -r V06-07-13    TopQuarkAnalysis/TopTools
cvs co -r V00-00-08    RecoMET/METAnalyzers
cvs co -r V15-02-06    RecoParticleFlow/PFProducer
cvs co -r V00-00-13 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V07-00-02 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Update GlobalTags for broken ones.

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_6
cd CMSSW_5_2_6/src
cmsenv
cvs co -r V07-00-02    TopQuarkAnalysis/Configuration
cvs co -r V06-07-11-01 TopQuarkAnalysis/TopTools
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-11-06 PhysicsTools/PatAlgos
cvs co -r V03-09-22    PhysicsTools/PatUtils
cvs co -r V00-03-16    CommonTools/ParticleFlow
cvs co -r V00-00-09    CommonTools/RecoUtils
cvs co -r V04-06-09    JetMETCorrections/Type1MET
cvs co -r V00-00-08    RecoMET/METAnalyzers
cvs co -r V00-00-07    RecoMET/METFilters
cvs co -r V00-00-13 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V07-00-01 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Update to the latest reference selction prescription after object approvals for ICHEP2012:
    • new MET filters;
    • use only PFBRECO (formerly known as PF2PAT);
    • remove obsolete x-object DeltaR cleaning;
    • add missing simple muon selector for z-distance of vertices (mu+jets);
    • muon updates;
    • jet updates (mu+jets:different pt cuts).
  • Update GlobalTags for Summer12 JECs and new b-tag scale factors.

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_6
cd CMSSW_5_2_6/src
cmsenv
cvs co -r V07-00-01    TopQuarkAnalysis/Configuration
cvs co -r V06-07-11-01 TopQuarkAnalysis/TopTools
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-11-02 PhysicsTools/PatAlgos
cvs co -r V03-09-22    PhysicsTools/PatUtils
cvs co -r V00-03-14    CommonTools/ParticleFlow
cvs co -r V00-00-09    CommonTools/RecoUtils
cvs co -r V04-06-09    JetMETCorrections/Type1MET
cvs co -r V00-00-08    RecoMET/METAnalyzers
cvs co -r V00-00-07    RecoMET/METFilters
cvs co -r V00-00-13 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V06-02-08 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Update to the latest PAT prescription.

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_5
cd CMSSW_5_2_5/src
cmsenv
cvs co -r V06-02-08    TopQuarkAnalysis/Configuration
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-11-00 PhysicsTools/PatAlgos
cvs co -r V03-09-22    PhysicsTools/PatUtils
cvs co -r V00-03-14    CommonTools/ParticleFlow
cvs co -r V00-00-09    CommonTools/RecoUtils
cvs co -r V04-06-05    JetMETCorrections/Type1MET
cvs co -r V00-00-13 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V06-02-07 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Eliminate obsolete re-running of jet algos completely.

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_5
cd CMSSW_5_2_5/src
cmsenv
cvs co -r V06-02-07    TopQuarkAnalysis/Configuration
cvs co -r V06-07-11-01  TopQuarkAnalysis/TopTools
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-07    PhysicsTools/PatAlgos
cvs co -r V00-03-11    CommonTools/ParticleFlow
cvs co -r V00-00-08 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V06-02-06 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Fix/update isolation treatment in/from PF2PAT.
  • Fix input to rho calculation for all CMSSW_5_2_X GlobalTags according to this update from Mar. 15th.
    (The CMSSW_5_2_X GlobalTags inherit from CMSSW_5_0_X GlobalTags, which are newer than the ones mentioned there.)

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_5
cd CMSSW_5_2_5/src
cmsenv
cvs co -r V06-02-06    TopQuarkAnalysis/Configuration
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-07    PhysicsTools/PatAlgos
cvs co -r V00-03-11    CommonTools/ParticleFlow
cvs co -r V00-00-08 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V06-02-05 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Fix electrons PF isolation for recent naming scheme updates (from Sarah).

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_5
cd CMSSW_5_2_5/src
cmsenv
cvs co -r V06-02-05    TopQuarkAnalysis/Configuration
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-05    PhysicsTools/PatAlgos
cvs co -r V00-03-11    CommonTools/ParticleFlow
cvs co -r V00-00-08 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V06-02-04 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Apply HBHE noise and scraping filters to data only (thanx, Andrea G.!).
  • Use correct MVA electron ID.

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_5
cd CMSSW_5_2_5/src
cmsenv
cvs co -r V06-02-04    TopQuarkAnalysis/Configuration
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-05    PhysicsTools/PatAlgos
cvs co -r V00-03-11    CommonTools/ParticleFlow
cvs co -r V00-00-08 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
cd EGamma/EGammaAnalysisTools/data
cat download.url | xargs wget
cd -
scram b -j 9

V06-02-02 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Apply new reference selection as in TWikiTopRefEventSel:
    • New MVA electron ID instead of CiC.
    • Delta R cut for jets vs. leptons removed in PF2PAT.
    • Updated cuts and IDs.

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_5
cd CMSSW_5_2_5/src
cmsenv
cvs co -r V06-02-02    TopQuarkAnalysis/Configuration
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-09-04    PhysicsTools/PatAlgos
cvs co -r V00-00-06 -d EGamma/EGammaAnalysisTools UserCode/EGamma/EGammaAnalysisTools
scram b -j 9

V06-02-01 (CMSSW_5_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Remove TotalKinematicsFilter for MC again, since it is not needed any more.
  • Clean up triggers and run ranges.

Installation Recipes

CMSSW_5_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_5_2_5
cd CMSSW_5_2_5/src
cmsenv
cvs co -r V06-02-01 TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-23 (CMSSW_4_4_X)

TIP This tag is documented in this version of this TWiki!

Change Log

Installation Recipes

CMSSW_4_4_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_4_4
cd CMSSW_4_4_4/src
cmsenv
cvs co -r V00-03-05-10 CommonTools/ParticleFlow
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-07-47    PhysicsTools/PatAlgos
cvs co -r V06-01-23    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-22 (CMSSW_4_4_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Remove incompatibility switch to 42X again.
  • Fix/update isolation treatment in/from PF2PAT.
  • Fix input to rho calculation for used GlobalTags START44_V13, GR_R_44_V15 according to this update from Mar. 15th.

Installation Recipes

CMSSW_4_4_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_4_4
cd CMSSW_4_4_4/src
cmsenv
cvs co -r V00-03-05-10 CommonTools/ParticleFlow
cvs co -r V06-05-01    DataFormats/PatCandidates
cvs co -r V08-07-46    PhysicsTools/PatAlgos
cvs co -r V06-01-22    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-19 (CMSSW_4_4_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Add forgotten TotalKinematicsFilter for MC
  • Deal with new backward incompatibility to 42X input in PAT with a new switch.
  • Use pvCollection collection parameter of usePF2PAT.
  • Adapt kt6PFJets to latest JetMET recipe.

Installation Recipes

CMSSW_4_4_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_4_4
cd CMSSW_4_4_4/src
cmsenv
cvs co -r V00-03-05-04 CommonTools/ParticleFlow
cvs co -r V08-07-42    PhysicsTools/PatAlgos
cvs co -r V06-01-19    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-17 (CMSSW_4_4_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Updated GlobalTags.

Installation Recipes

CMSSW_4_4_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_4_4
cd CMSSW_4_4_4/src
cmsenv
cvs co -r V00-03-05-04 CommonTools/ParticleFlow
cvs co -r V08-07-41    PhysicsTools/PatAlgos
cvs co -r V06-01-17    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-14-04 (CMSSW_4_2_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Fix/update isolation treatment in/from PF2PAT.
  • Fix input to rho calculation for used GlobalTags START42_V17, GR_R_42_V23 according to this update from Mar. 15th.

Installation Recipes

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_8_patch7
cd CMSSW_4_2_8_patch7/src
cmsenv
cvs co -r B4_2_X_V00-03-02 CommonTools/ParticleFlow
cvs co -r V06-04-19-04 DataFormats/PatCandidates
cvs co -r V08-06-54    PhysicsTools/PatAlgos
cvs co -r V03-09-18    PhysicsTools/PatUtils
cvs co -r V00-03-24    PhysicsTools/SelectorUtils
cvs co -r V08-02-14    PhysicsTools/UtilAlgos
cvs co -r V00-03-31    RecoEgamma/ElectronIdentification
cvs co -r V02-04-17    RecoJets/Configuration
cvs co -r V06-01-14-02 TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-14-02 (CMSSW_4_2_X) and V06-01-16 (CMSSW_4_4_X)

TIP This tag is documented in this version of this TWiki!

Change Log

  • Added switch for new pile-up subtraction for PF isolation calculation (from TJ).

Installation Recipes

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_8_patch7
cd CMSSW_4_2_8_patch7/src
cmsenv
cvs co -r B4_2_X_V00-03-02 CommonTools/ParticleFlow
cvs co -r V06-04-19-04 DataFormats/PatCandidates
cvs co -r V08-06-54    PhysicsTools/PatAlgos
cvs co -r V03-09-18    PhysicsTools/PatUtils
cvs co -r V00-03-24    PhysicsTools/SelectorUtils
cvs co -r V08-02-14    PhysicsTools/UtilAlgos
cvs co -r V00-03-31    RecoEgamma/ElectronIdentification
cvs co -r V02-04-17    RecoJets/Configuration
cvs co -r V06-01-14-02 TopQuarkAnalysis/Configuration
scram b -j 9

CMSSW_4_4_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_4_3
cd CMSSW_4_4_3/src
cmsenv
cvs co -r V08-07-38-02 PhysicsTools/PatAlgos
cvs co -r V06-01-16    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-14-01 (CMSSW_4_2_X) and V06-01-15 (CMSSW_4_4_X)

TIP This tag is documented in this version of this TWiki!

Change Log

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_8_patch7
cd CMSSW_4_2_8_patch7/src
cmsenv
cvs co -r B4_2_X_V00-03-01 CommonTools/ParticleFlow
cvs co -r V06-04-19-02     DataFormats/PatCandidates
cvs co -r V08-06-53        PhysicsTools/PatAlgos
cvs co -r V03-09-18        PhysicsTools/PatUtils
cvs co -r V00-03-24        PhysicsTools/SelectorUtils
cvs co -r V08-02-14        PhysicsTools/UtilAlgos
cvs co -r V00-03-31        RecoEgamma/ElectronIdentification
cvs co -r V02-04-17        RecoJets/Configuration
cvs co -r V06-01-14-01     TopQuarkAnalysis/Configuration
scram b -j 9

CMSSW_4_4_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_4_3
cd CMSSW_4_4_3/src
cmsenv
cvs co -r V08-07-38-02 PhysicsTools/PatAlgos
cvs co -r V06-01-15    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-14

TIP This tag is documented in this version of this TWiki!

Change Log

  • Update to the latest version of the PAT:
    • Use switches to select lepton isolation cones of R=0.3 (default: 0.4) rather than setting the absolute value.
      This goes along with PF2PAT developments, where these two values are both used for production by default (muons only so far).
  • Fix missing parameter in PrimaryVertexFilter configuration (from Supriya).

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_8_patch7
cd CMSSW_4_2_8_patch7/src
cmsenv
cvs co -r B4_2_X_V00-03-00 CommonTools/ParticleFlow
cvs co -r V06-04-19-02 DataFormats/PatCandidates
cvs co -r V08-06-50    PhysicsTools/PatAlgos
cvs co -r V03-09-18    PhysicsTools/PatUtils
cvs co -r V00-03-24    PhysicsTools/SelectorUtils
cvs co -r V08-02-14    PhysicsTools/UtilAlgos
cvs co -r V00-03-31    RecoEgamma/ElectronIdentification
cvs co -r V02-04-17    RecoJets/Configuration
cvs co -r V06-01-14    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-12

TIP This tag is documented in this version of this TWiki!

Change Log

  • Provide switch to add minimal lepton analysis selection cuts (veto leptons) to top projections.
  • Calculating jet areas for jets from RECO in case of L1FastJet corrections, which would be constantly 1 otherwise.
  • Use another instance of PrimaryVertexObjectFilter instead of the buggy PrimaryVertexFilter.
    TIP However, the fix for the PrimaryVertexFilter is also included in the tag set below.
  • Use correct vertices also in PAT lepton producers.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_8
cd CMSSW_4_2_8/src
cmsenv
cvs co -r V06-04-19-01 DataFormats/PatCandidates
cvs co -r V08-06-41-02 PhysicsTools/PatAlgos
cvs co -r V00-03-24    PhysicsTools/SelectorUtils
cvs co -r V08-02-14    PhysicsTools/UtilAlgos
cvs co -r V00-03-31    RecoEgamma/ElectronIdentification
cvs co -r V02-04-17    RecoJets/Configuration
cvs co -r V06-01-12    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-08

TIP This tag is documented in this version of this TWiki!

Change Log

  • Added further electron ID working points.
  • Require comb. iso. of 0.2 in a cone of 0.4 for muons in PF.
  • Require comb, iso. of 0.125 for signal PF muons (tight and loose identical).
  • Bug fix for PF leptons iso. calculation config. (Nic, HN message).
  • Covering issue described in https://hypernews.cern.ch/HyperNews/CMS/get/JetMET/1215.html by switching Voronoi computation off.
  • Produce kt6PF rho in any case in order to be available for later application of L1Fastjet corrections ("on-the-fly").
  • Some minor fixes.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_8
cd CMSSW_4_2_8/src
cmsenv
cvs co -r V06-04-19-01 DataFormats/PatCandidates
cvs co -r V08-06-41    PhysicsTools/PatAlgos
cvs co -r V00-03-17    PhysicsTools/SelectorUtils
cvs co -r V00-03-31    RecoEgamma/ElectronIdentification
cvs co -r V02-04-17    RecoJets/Configuration
cvs co -r V06-01-08    TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-04

TIP This tag is documented in this version of this TWiki!

Change Log

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_4
cd CMSSW_4_2_4/src
cmsenv
cvs co -r V06-04-16 DataFormats/PatCandidates
cvs co -r V08-06-31 PhysicsTools/PatAlgos
cvs co -r V00-03-31 RecoEgamma/ElectronIdentification
cvs co -r V02-04-17 RecoJets/Configuration
cvs co -r V06-01-04 TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-03

Change Log

  • Bug fix in order of tool calls (Kevin);
  • Added pile-up info for MC (Kevin);
  • Fixing some input tags.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_4
cd CMSSW_4_2_4/src
cmsenv
cvs co -r V06-04-16 DataFormats/PatCandidates
cvs co -r V08-06-31 PhysicsTools/PatAlgos
cvs co -r V00-03-31 RecoEgamma/ElectronIdentification
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V06-01-03 TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-02

TIP This tag is documented in this version of this TWiki!

Change Log

  • Enable option to run a separate standard workflow with PF jets instead of Calo jets.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_4
cd CMSSW_4_2_4/src
cmsenv
cvs co -r V06-04-14 DataFormats/PatCandidates
cvs co -r V08-06-31 PhysicsTools/PatAlgos
cvs co -r V00-03-31 RecoEgamma/ElectronIdentification
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V06-01-02 TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-01

TIP This tag is documented in this version of this TWiki!

Change Log

  • Add CiC electron IDs to the work flows (not used in selection yet), following the recipe given on the CiCelectronID TWiki.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_4
cd CMSSW_4_2_4/src
cmsenv
cvs co -r V06-04-14 DataFormats/PatCandidates
cvs co -r V08-06-31 PhysicsTools/PatAlgos
cvs co -r V00-03-31 RecoEgamma/ElectronIdentification
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V06-01-01 TopQuarkAnalysis/Configuration
scram b -j 9

V06-01-00

TIP This tag is documented in this version of this TWiki!

Change Log

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_4
cd CMSSW_4_2_4/src
cmsenv
cvs co -r V06-04-14 DataFormats/PatCandidates
cvs co -r V08-06-31 PhysicsTools/PatAlgos
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V06-01-00 TopQuarkAnalysis/Configuration
scram b -j 9

V06-00-16

TIP This tag is documented in this version of this TWiki!

Change Log

  • Added PF jets to standard work-flow in the all-hadronic example by Eike.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_4
cd CMSSW_4_2_4/src
cmsenv
cvs co -r V06-04-14 DataFormats/PatCandidates
cvs co -r V08-06-31 PhysicsTools/PatAlgos
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V06-00-16 TopQuarkAnalysis/Configuration
scram b -j 9

V06-00-15

TIP This tag is documented in this version of this TWiki!

Change Log

  • Added configuration parameters to steer the PF2PAT top projections;
  • Added PF jets to standard work-flow in the all-hadronic example.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_4
cd CMSSW_4_2_4/src
cmsenv
cvs co -r V06-04-14 DataFormats/PatCandidates
cvs co -r V08-06-31 PhysicsTools/PatAlgos
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V06-00-15 TopQuarkAnalysis/Configuration
scram b -j 9

V06-00-13

TIP This tag is documented in this version of this TWiki!

Change Log

  • All hadronic example added by Eike.

Installation Recipies

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_3
cd CMSSW_4_2_3/src
cmsenv
cvs co -r V08-06-25 PhysicsTools/PatAlgos
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V04-01-00 RecoJets/JetAlgorithms
cvs co -r V05-05-03 RecoJets/JetProducers
cvs co -r V06-00-13 TopQuarkAnalysis/Configuration
scram b -j 9

V06-00-12 and V06-00-09-03

TIP These tags are documented in this version of this TWiki!

Change Log

  • Initial tag announced to public;
  • mu+jets only.

Installation Recipies

CMSSW_4_1_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_1_6
cd CMSSW_4_1_6/src
cmsenv
addpkg                 FWCore/ParameterSet
cvs up -r 1.76         FWCore/ParameterSet/python/SequenceTypes.py
addpkg                 PhysicsTools/PatAlgos
cvs up -r 1.22.2.1     PhysicsTools/PatAlgos/python/tools/trigTools.py
cvs co -r V02-04-16    RecoJets/Configuration
cvs co -r V04-01-00    RecoJets/JetAlgorithms
cvs co -r V05-05-03-00 RecoJets/JetProducers
cvs co -r V06-00-09-03 TopQuarkAnalysis/Configuration
scram b -j 9

CMSSW_4_2_X

Show  Hide  
ssh lxplus.cern.ch
cmsrel CMSSW_4_2_3
cd CMSSW_4_2_3/src
cmsenv
cvs co -r V08-06-25 PhysicsTools/PatAlgos
cvs co -r V02-04-16 RecoJets/Configuration
cvs co -r V04-01-00 RecoJets/JetAlgorithms
cvs co -r V05-05-03 RecoJets/JetProducers
cvs co -r V06-00-12 TopQuarkAnalysis/Configuration
scram b -j 9

Contacts

Review status

Reviewer/Editor and DateSorted ascending Comments
Volker Adler - 19-May-2011 created page

-- VolkerAdler - 19-May-2011

This topic: CMSPublic > CMSCommunicationsGroup > CMSCommunicationsProjects > WebHome > SWGuide > SWGuideTop > SWGuideTopRefEventSel
Topic revision: r65 - 2014-03-11 - VolkerAdler
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright &© 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback