TWiki> CMSPublic Web>SWGuideUsersFAQ (revision 24)EditAttachPDF

Questions and answers

This page collects frequently asked questions. Some questions (and answers) concerning common problems have been included here from the Hypernews forums. You can also submit question through the CMSSW Savannah page. Choose "Submit" from the "Support" menu bar or go directly to the Submit page.

There's also a possibility of having the questions answered by experts in User Support Questions&Answers sessions which can be held on Tuesdays at 9:30 am. in 40-RA-10. The next session will be held when need arises.

Please check the existing documentation, especially the CMSWorkbook before adding your question.

Naming of the samples in DBS

hn-cms-btag, Pavel Demin, 07 February 2007

Could someone please explain me what QCD samples are intended to be used for b-tag validation? I can see that currently there are two types of samples:

  • mc-onsel-120_PU_QCD_pt_80_120
  • mc-onsel-120_QCD_pt_80_120
I could not find any description of the samples in DBS.

Answer:

In http://cmsdbs.cern.ch/discovery/ :

  1. Datasets with "onsel" in the name were produced at the request of the HLT group. The corresponding configuration files are in the CMSSW directory Configuration/CSAProduction/data/.
  2. Datasets with "physval" in the name were requested by the Physics Validation Group. The .cfg files are in Configuration/PhysicsValidation/data/.
  3. Datasets with "relval" in the name were requested by the Software Validation Group. The .cfg files are in Configuration/ReleaseValidation/data/.

The data/ directories all contain a subdirectory PileUp/, which contains any .cfg files used for pileup production.

(In some cases, you may need to check out the CVS HEAD of Configuration to find them ...)

So in your example: mc-onsel-120_PU_QCD_pt_80_120 was produced with Configuration/CSAProduction/data/PileUp/CSA06Production/data/PileUp/QCD_pt_80_120_PU_OnSel.cfg , whilst mc-onsel-120_QCD_pt_80_120 was produced with Configuration/CSA06Production/data/QCD_pt_80_120_OnSel.cfg . And our pileup bb and cc dijets are produced with PhysicsValidation/data/PileUp/BBbar_pt80to120_LowLumi.cfg etc. (Ian Tomalin)

Compatibility between CMSSW versions

hn-cms-edmFramework, Pedrame Bargassa, 23 Nov 2006

Is there any known 120pre2 -> 106 incompatibility as well ?

Answer:

Yes, you should expect to read the CSA06 MC data only up to CMSSW_1_0_6.

The general picture is:

Type of data produced in run in
GEN-SIM-DIGI 0_8_x-1_0_x 1_0_x (preferably 1_0_6)
GEN-SIM-DIGI-RECO 1_0_x 1_0_x (preferably 1_0_6)
GEN-SIM-DIGI 1_1_1 1_1_x
GEN-SIM-DIGI-RECO 1_1_1 1_1_x

i.e. in general don't expect to read any MC data written in 1_0_x with 1_1_x and don't expect to read anything written in 1_1_x with 1_2_x. (It may run, but produce garbage results, don't waste your time on it.)

Right now it looks like only GEN-SIM data will be usefully compatible between 1_1_x and 1_2_x. (Peter Elmer)

NB, this table has been updated in WorkBookWhichRelease

How to access trajectories and track state on each crossed layers

hn-cms-swDevelopment, Boris Mangano, 18 Oct 2006

In the past, there were many requests to access track's parameters (in particular the complete TrajectoryMeasurement) on the surface of each layer crossed by the track. The trajectory is the object devoted to collect all the TrajectoryMeasurements (TM) of the tracks. Nevertheless TrajectoryMeasurement objects were not designed to be saved on disk and, after the final fit of the tracks is done, the informations about the TMs is discarded. Final Track contain only the TSOS on the innermost and outermost hits.

Answer:

Since last nightly and, hopefully, in120pre2: Thanks to a very recent update of the Framework, there is the possibility to define transient-only product which can be put into the event, even if they are not allowed to be saved on the root file.

The RecoTracker/TrackProducer has been accordingly modified to be able to put the vector of trajectories into the event. The default behavior, for saving cpu time, is to discard the copy. Nevertheless,the user can now change the new TrackProducer's parameter "TrajectoryInEvent" from 'false' to 'true' and the trajectories will be put into the Event during the execution of the job.

A subsequent module can get them back from the event using the standard commands:

Handle<vector<Trajectory> > trajCollectionHandle;
iEvent.getByLabel(param_.getParameter<string>("trajectoryInput"),trajCollectionHandle);
and then analyze them:
for(vector<Trajectory>::const_iterator it =
trajCollectionHandle->begin(); it!=trajCollectionHandle->end();it++){
      edm::LogVerbatim("TrajectoryAnalyzer") << "this traj has " <<
         it->foundHits() << " valid hits" ;

vector<TrajectoryMeasurement> tmColl = it->measurements();
.............
A complete analyzer (TrajectoryAnalyzer .cc .cfg) has been committed in the RecoTracker/TrackProducer/test directory. It explains how the value of the TMs can be accessed.

Last remarks, the trajectories can be accessed after the TrackProducer module is executed (with its default TrajectoryInEvent parameter changed) or after the Refitter module: this second producer, has also the new TrjectoryInEvent parameter.

The important thing is that the 2 modules (TrackProducer+"user defined trajectory analyzer" or TrackRefitter+"user defined..") are run in the same job. The trajectories are not persistent! (Boris Mangano)

Can't compile an EDAnalyzer created with mkedanlzr

hn-cms-swDevelopment, Benedict Huckvale, 10 Oct 2006

I've done nothing more than

> eval ...
> mkedanlzr WGAnalyser
> rm -r interface/ test/ doc/
But when I try to build I get this:
benedict@lxplus061:~/w0/cmssw/CMSSW_1_0_1/src/WGAnalyser > scramv1 b -r
Resetting caches
Parsing BuildFiles
..
 /afs/cern.ch/user/b/benedict/w0/cmssw/CMSSW_1_0_1/tmp/slc3_ia32_gcc323/Makefile:536: *** target file
`src_clean' has both : and :: entries.  Stop.

Answer:

You need to put the generated package into a subsystem (i.e. NOT under /src/myAnalyzer but /src/subsys/myAnalyzer. (Shaun Ashby)
Unfortunately you might also find you need to check out an entirely new CMSSW project area. Try not to build a wrongly placed package by accident in future! (Benedict Huckvale)

Problems when removing RECO.cff from a config file

hn-cms-swDevelopment Taylan Yetkin, Sep 23,

I would like to remove reconstruction part from the others. When I remove include "Configuration/Examples/data/RECO.cff" and reconstruction from path path p = {smear_and_geant,digitization, reconstruction} which are in the exampleRunAll.cfg my naive guess is that it should work. However it does not.

Answer:

I have found what in RECO.cff depends on the ParticleDataTable: it is the HepMCCandidateProducer which is then used by different Jet and Met algorithms to do their work on the mc particles instead of the reconstructed quantities. So I guess RECO.cff is not a completely accurate name, it probably should be called MCRECO.cff since it is designed to work with MC and not actual data. To solve your problem, I suggest adding

include "SimGeneral/HepPDTESSource/data/pdt.cfi"

to your config file. (Chris Jones)

Problems accessing more than one file

hn-cms-swDevelopment, Christian Veelken, Wed, 13 Sep 2006

I have two Monte Carlo files that were produced independently and each contain 500 events. I have written a class derived from EDAnalyzer to make plots of the file content. When I run over one of the two files at a time, everything is fine, no problem. But when I run over both MC files in the same cmsRun job, cmsRun crashes when processing the first event in the second file.

Answer:

My guess is the program crashes in your EDAnalyzer. Are you by chance filling your own ROOT file from within the EDAnalyzer? If so, then other have found that when the PoolSource goes from one input ROOT file to another one their code crashes. What was determined is unless you've explicitly openned your own ROOT file and tied your histogram, ntuples, etc. to your file, then ROOT will tie those things to the first 'input' file and when that input file goes away the pointers to your histograms, ntuples, etc. then point to object that no longer exist (since ROOT deleted them when the file closed). So it look like you need to modify the ROOT calls you are making in your EDAnalyzer. (Chris Jones)

If Chris' diagnosis is correct (very likely), you can have a look at RecoEcal/EgammaClusterProducers/src/EgammaSimpleAnalyzer.cc where I had a similar problem and is now solved by correctly binding the histos and trees to my root file w/o interfering with PoolSource. (Shahram Rahatlou)

Where can I find the data?

How do I know what data is available (real data from MTCC or simulation data) and how can I access it?

Answer:

See the Workbook page on data access.

For the MTCC data (cosmic muons at CMS) see the instructions in the IGUANA web page, and in particular the data file location.

The CSA06 samples can be found using DBS tool.

For each release of the CMSSW packages, a set of of small event samples are produced which are mainly used to validate the release. Find the instructions how to access this data in the release validation samples page.

How to save cross section in the root file?

Sami Lehti, 21 Jul 2006

In an analysis containing several channels (signal+backgr), it is very helpful if some normalization constants, like cross section and preselection efficiency, can be stored in the root file. How is this done in practise (a working example would be nice)? How is the cross section read from the root file? Can the stored cross section be changed by hand afterwards? For example if i have 1M events in root file(s), and i get a new cross section from theorists, do i have to rerun the 1M events, or can i change the cross section value in the root file(s)? If yes, how?

Answer:

The mechanism to add a cross-section to the run or job (i.e. one number per run) is not yet ready, it is planned but not yet there (it is foreseen by the end of August, at the earliest)

Meanwhile, you can try the following solution which writes a number to each event.

-- KatiLassilaPerini - 13 Jul 2006

Edit | Attach | Watch | Print version | History: r54 | r26 < r25 < r24 < r23 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r24 - 2007-02-08 - CMSUserSupport



 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    CMSPublic All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback