Dream Testbeam July 2012
Shift schedule: July beam period 16th - 30th July
people at CERN
DAQ expert schedule: July test beam period 16th - 30th July.
DAQ expert to be called in case of problem: on call shift are intended from 3pm first day in the header to 3pm second day in the header
Measurement program: July test beam period 16th - 30th July.
Crystal Program:
- Study of polarization measurements with PbF2 crystal (electron and photon beam)
- center the crystal position (acquisition with ADC)
- Results of PbF2 showed only a small effect, apparently due to scrambling of the light polarization along the long axis of the crystal -- see CrystalPolarizationStudies.
- Study of polarization measurements with BSO (BSO1) + U330+ GG495 filters and comparison with last year data. Acquisition with oscilloscope.
- scan with different thickness of lead absorber with electron
- change favorable/unfavorable filter
- scan with different thickness of lead absorber with photon
- change favorable/unfavorable filter
- Test amplifiler
- Energy scan to verify double gain measurements
Fiber Module Program:
wafeforms taken with parassitic muons with oscilloscope:
S signal:
https://atlserver.pv.infn.it/franchin/DREAM/2012/TEST_NOISE_AGO/TB_July/
C signal:
https://atlserver.pv.infn.it/franchin/DREAM/2012/TEST_NOISE_AGO/TB_July/
- Light Mixers. some results here:
Shift Summaries
Please at the end of the shift fill the report here :
JulyTBShiftSummary
HV Mappings
You can check here the HV mapping of
RO Mappings
You can find several readout configurations, depending from the testbeam perod:
Good Run List
Information on the run taken are reported here:
GoodRunListTBJuly2012
2012 July online macros
- CheckRun_2012.C Xtals (ADC), Newdream (ADC) and Ancillary are displayed. Run it in root with .x CheckRun_2012.C ("RUN#")
- NewDream_scope.C Newdream 2 Channels oscilloscope.
- Newdream_2012.C shows every plot (high and low gain of newdream)
- Newdream_2012_Low.C shows only low gain plots of newdream both with and without pedestal (there is also the TGraph to do scan positions in order to find the edges, but now it is commented)
--
SilviaFranchino - 10-Jul-2012