Installation of the DWC


The DWC requires the following Voltages: +6V, -6V, 0 (beware, sometimes the color convetion is not respected, if the DWC does not work check that the voltages on the lemo connector are as described in the manual ). The Discriminator box (the long metallic bar under the DWC) also requires -12V.



See DwcCalibration

-- MicheleCascella - 2014-11-28

Topic attachments
ISorted ascending Attachment History Action Size Date Who Comment
PNGpng DWC_power.png r1 manage 39.4 K 2017-07-18 - 19:02 MicheleCascella DWC power connector

This topic: DREAM > DREAMDaqDocumentation > DwcInstallation
Topic revision: r4 - 2017-07-20 - MicheleCascella
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback