Trigger Box Mapping

The authoritative version of this document is in the DreamTrigger.ucf file in the https://twiki.cern.ch/twiki/bin/view/DREAM/TriggerBox page

Channel 13 discriminator has problems

NIM in/out ch other signal type nameSorted ascending comment V262 (IO) ch V513 (IO) ch V814 (Discr.) ch
- OUT of BUSY timing unit - busy shaped daqTr1 (25 usec)   IN 1  
- NIM scaler clear - DAQ clear clears scaler (at run start) SHP OUT 1    
17   NIM output daqTr1 to busy gate gen.      
18   NIM output daqTr2 to V976 fan-out      
15   NIM output isPedTrig     IN 3  
13   NIM output isPhysTrig     IN 0  
16   NIM output isSpill     IN 2  
10   ECL input          
5   NIM input nim_daqRes DAQ reset SHP OUT 0    
1   NIM input nim_enable trigger enable OUT 0    
2   NIM input nim_enPed pedestal enable OUT 3    
4   NIM input nim fast gate fast gate      
3   NIM input nim_spill SPS spill signal      
14   NIM output nimFastGate 1 to Calorimeter
ADC gate (0&1)
     
19   NIM output nimFastGate 2 to DRS Trig input TR0      
20   NIM output nimFastGate 3 to DRS Trig input TR1      
6   ECL input ped pedestal trigger     9
8   ECL input T1       11
12   NIM output T1T2 T1 & T2      
11   NIM output T1T2 _Vbar T1 & T2 & not(Veto)      
9   ECL input T2       12
7   ECL input veto       10
-- MicheleCascella - 2014-11-30


This topic: DREAM > DREAMDaqDocumentation > TriggerBoxMapping
Topic revision: r7 - 2015-10-28 - SilviaFranchino
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback