TWiki home Point 1 Point 2 Point 3 Point 4 Point 5 Point 6 Point 7 Point 8 Minutes

Back to overview

YOU ARE VIEWING BlogEntryPoint6x2007x10x03x15x28

Warm Magnets Commissioning in point 6. Action list for the 24h run and polarity test

-Thursday 4th morning: Setup ongoing (Bernard Dubois) and pre-test from the CCC before 10:30h

-Thursday 4th,10:30h: Consignation of the converters in order to remove the covers from the magnets (Jacky Mazet)

-Thursday 4th,≈14:00h: Once the covers are removed, the converters will be deconsignée (Jacky Mazet)

-Thursday 4th,after deconsignation of the converters: Start of the 24h heat run from the CCC

-Thursday 4th,≈ 17:00h: General verification on the cables (Baptiste Lebeau)

-Friday 5th, before finishing the 24h heat run: Polarity test (Jacky Mazet)

-Friday 5th, ≈ 13:30h: Magnets and cables temperatures measurements (Jacky Mazet, Baptiste Lebeau)

-Friday 5th, ≈ 14:00h: Stop of the heat run from the CCC

-Friday 5th, just after stopping the heat run, temperatures measurements on the converters (Bernard Dubois)

-Friday 5th , consignation of the converters (Jacky Mazet)

-Friday 5th, after consignations of the converters: the covers will be put in place (Jacky Mazet)

Comments:


This topic: HCC > WebHome > BlogEntryPoint6x2007x10x03x15x28
Topic revision: r2 - 2007-10-03 - JacekSzkutnik