TWiki> LHCb Web>LHCbVELO>VELOOperatingManuals>Cooling (revision 1)EditAttachPDF

Quick start

Before you start the cooling system check that the power supplies of the base-plate heaters are switched on. The 8 power supplies are located at the bottom of the C3B02 rack. Note that the voltage/current reading can be zero when the system cooling has been off for long time.

The system can be started from the user interface (see section 5 and figure 1 of the manual).

  • Push the button “start TL(TR) A-side (C-side)” to start the cooling of the A-side(C-side).
  • Verify that the set-point is correct in the field “setpoint”
    • +10'C for the backup chiller SB
    • -25'C for the main chiller SA
  • Follow the status in the status field (see section 5 for details)
    • Verify that the right mode (SA or SB) is started
    • Verify that the correct half is cooled
  • To switch off push the button “Stop TL & TR”

For more information see manual

-- MartinVanBeuzekom - 24 Apr 2008

Edit | Attach | Watch | Print version | History: r6 | r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 2008-04-24 - MartinVanBeuzekom
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    LHCb All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback