Sub-Farm D1E08 (vlan 908)
Sub-nets:
- 10.130.152.254 / 24
- 10.131.152.254 / 24
Ports:
Ports used:
| Port |
host(s) |
Comment |
| Gi 0/46 |
sw-d1e08-c1 |
farm uplink |
Switches
| Type |
Name |
Serial |
MAC |
| Control |
sw-d1e08-c1 |
TW547SD046 |
00:15:60:19:96:00 |
| Data |
sw-d1e08-d1 |
SG652TH01F |
00:16:B9:0C:7f:00 |
Computers
| Name |
Serial |
base MAC |
Data patched to |
SW-DAQ-01 port |
| hlte0804 |
DY5ZF2J |
00:13:72:fb:08:80 |
D2D02F20 |
Gi 0/7 |
| hlte08 |
13H222J |
00:14:22:B0:C7:E9 |
|
| hlte0803 |
3Y5ZF2J |
00:13:72:f9:18:5f |
D2D02F20 |
Gi 0/7 |
| hlte0801 |
52K4H2J |
00:15:c5:e5:44:54 |
D2D02F19 |
Gi 0/6 |
| hlte0802 |
7ZYXD2J |
00:13:72:fa:61:25 |
D2D02F19 |
Gi 0/6 |
Steps
| Install & Cable Control & Data switches |
X |
| Enter info in hlt_nodes.csv |
X |
| Connect the uplink in D2 to the main control switch |
X |
| Configure the swiches addresses in DNS & DHCP |
X |
| Configure SW-UX-01 |
X |
| Power on the switches |
X |
| Configure the control switch |
X |
| Update the Data switch firmware |
X |
| Configure the Data switch |
X |
| Install the Server |
X |
| Connect data cables in D2 & configure SW-DAQ-01 |
X |
| Connect the storage uplink |
X |
| Install and boot the nodes |
X |
| Test the connectivity |
X |
| Ask for PVSS license |
X |
| Install the pvss_licence on the node and in /var/www/html/pvss/licences on sw-sx-01. |
X |
This topic: LHCb
> WebHome >
LHCbOnline >
NetworkManagement >
PortsUX01 > FarmE08
Topic revision: r3 - 2008-04-08 - LoicBrarda
Copyright &© 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.