Fibre Mat Inventory - Overview of fibre mats

"good mats"

mats that are used in modules etc or which are meant to

Name Nickname Fibres used Winding place wheel layers width length pins glue quality comments measurements used in module other comments current location
FiMa -DO-14-Mar-18 coverlay mat 13112107 DO (DO) 6 130 2500 coverlay marks

301-2

+TiO2

strange fibre shifts and localy incorrect pitch due to not well enough aligned coverlay cross section, 90Sr, testbeam 2014 ("6-layer" testbeam) wound on coverlay structure which was fixed by hand on DO-wheel CERN
FiMa -DO-14-Okt-23 Workshop 13112102 DO AC 5 130 2500 no (2)

301-1?

+TiO2

longitudinal cut (few cm) at one end - - casted, shown at module workshop DO
FiMa -DO-14-Sep-17 Testbeam 10012135 DO AC 5 130 2500 no

301-1

+20% TiO2

fine - FiMo -HD-14XXXX module shown at module workshop HD
FiMa -Do-14-Feb-14  

10012136

10012134

13XXXXXX

DO DO 5 130 2500 no

301-2

+TiO2

fine cros section (?) 1/3rd used in FiMo -HD-14XXXX wound for test purpuses to test the "glueing in layer". Wound from many different fibre leftovers  
"EDR mats"

mats produced for the EDR module

Name Nickname Fibres Winding place Wheel Layers Width Length Pins Glue Quality comments Measurements Used in Module Other Comments Current location
FiMa-DO-15-Feb-13   100112138 DO DO 6 150 3000 11/11 Pins: 301 else:301-2, 25% TiO2 tiny cracks beside pins     first 6-layer mat with pins, taking off too slow (cracks) AC
FiMa-DO-15-Feb-18   14080803 + 1/2 layer 13112104 DO DO 6 150 3000 10/11 Pins: 301 else:301-2, 20% TiO2 lost 1 pins afterwards       AC
FiMa-DO-15-Mar-03   14080802 + 1/2 layer 14080804 DO DO 6 150 3000 11/11 Pins: 301 else:301-2, 20% TiO2 fine       AC
FiMa-DO-15-Mar-06   14080804 + 3/4 layer 14080805 DO DO 6 150 3000 11/11 Pins: 301 else:301-2, 20% TiO2 fine       AC
FiMa-DO-15-Mar-13   14080805 + 1 layer 14080801 DO DO 6 150 3000 10/11 Pins: 301 else:301-2, 20% TiO2 lost 1 pin     many interventions during winding due to bad quality of spool (blobs and winding) AC
FiMa-DO-15-Mar-18   14080801 + 1 layer 13112104 DO DO 6 150 3000 11/11 Pins: 301 else:301-2, 20% TiO2 fine       AC
FiMa-DO-15-Mar-26 Testbeam Mat 15022701 DO DO 6 150 3000 11/11 Pins: 301 else:301-2, 20% TiO2 fine       AC
FiMa-DO-15-Apr-10   15022701+15022703 DO DO 6 150 3000 11/11 Pins: 301 else:301-2, 20% TiO2 many interventions during winding due to thin fibre and lot of blobs, missing fibre for ca. 20cm at cut surface       AC
FiMa-DO-15-May-05   15022703 + 15022702 DO DO 6 150 3000 11/11 Pins: 301 else:301-2, 20% TiO2 fine       DO

"test mats"

mats that where produced for winding (or other) tests

Name Nickname Fibres used Winding place wheel layers width length pins glue quality comments measurements used in module other comments current location
FiMa -DO-14-Jul-14 TiO2 -mat 1 13112102 DO DO 5 30 2500 no no TiO2         CERN
FiMa -DO-14-Jul-14 TiO2 -mat 2 13112102 DO DO 5 31 2500 no 20% TiO2         CERN
FiMa -DO-14-Aug-05   13112102 DO AC 5 40 2500 no 20% TiO2         DO
FiMa -DO-14-Aug-11 Pin-Test 10012135 DO AC 3 30 2500 no 20% TiO2

Layer 2: One Fibre missing

Layer 3: Two Fibre missing

    Two Pins with "Uhu Endfest" DO?
FiMa -DO-14-Nov-25   13112103 DO AC 3 30 2500 no

301-1

+20% TiO2

Layer 1: Glue cured very fast    

massive problems during takeoff

glue around pinholes between first layer and wheel

the middle part off the mat stuck on the wheel while the outer parts peel away

also the first layer didn't stuck to the second

maybe one "good" meter of the fibremat

DO?
FiMa -DO-15-Jan-19   Fishing line DO DO 5 140 3000 8/11 301, 25% TiO2         AC
FiMa -DO-15-Jan-23   different oddments DO DO 5 140 3000 0/11 301-2, 25% TiO2 mat shrunk after cutting, lost pins     glue was not cured enough AC
FiMa -DO-15-Jan-27   different oddments DO DO 5 140 3000 9/11 Pins: 301 else:301-2, 25% TiO2 lost 2 pins due to taking off procedure       AC
FiMa -DO-15-Feb-02   different oddments DO DO 5 140 3000 11/11 Pins: 301 else:301-2, 25% TiO2 fine       AC

Fibre Module Inventory - Overview of fibre modules

Fibre Modules

modules with scintillating fibres

Name Nickname Fibre mat used Production place width length quality comments measurements other comments current location
FiM o -HD-14XXXX workshop module FiMa -DO-14XXXX HD 130 2500        
FiM o -HD-14XXXX
testbeam 2.5m HD module FiMa -AC-XXXXXX HD 130 2500   testbeam 2014 week 1+2 mat is 7cm wide  
FiM o -HD-14XXXX
testbeam 1m HD module FiMa -DO-14XXXX HD 130 1000   testbeam 2014 half of week 1 ?    

Dummy Modules

modules with dummy mats

Name Nickname Fibres used Winding place layers width length quality comments measurements used in module other comments current location
                       
-- RobertEkelhof - 2014-12-03
Edit | Attach | Watch | Print version | History: r10 < r9 < r8 < r7 < r6 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r10 - 2018-11-27 - BlakeLeverington
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    LHCb All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback