Force10 Switch: software upgrade

Make sure that both RPMs must contain the same software label number before the upgrade. Also the following steps apply if the bootcode version is 2.4.1.1

Force10#copy file-url flash://filepath boot-image synchronize-rpm
Where file-url is the location of the source(image) file.

Force10#redundancy force-failover rpm

Peer RPM's SW version is different but HA compatible.
Failover can be done by warm or hitless upgrade.
All linecards will be reset during warm upgrade.
Specify hitless upgrade or warm upgrade [confirm hitless/warm]:warm 
Proceed with warm upgrade [confirm yes/no]:yes

Now Standby RPM will mastership of the system.

Warm upgrade means that a software upgrade requires a reset of the line cards and SFMs and forwarding will be interrupted.

Hitless upgrade requires the first three release numbers must be the same, for example: upgrading from 7.4.2.3 to 7.4.2.5 is a hitless upgrade

-- GuomingLiu - 19 May 2008

Edit | Attach | Watch | Print version | History: r1 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r1 - 2008-05-19 - GuomingLiu
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    LHCb All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback