Setup for Herschel in TED run

This page intend to collect informations on how to run Herschel in the TED run of November 21-22, 2014.

Description of the setup

Only the backward station are considered for the TED run.

PMT

The station's PMTs receives HV and bias from the Caen power supply located in D. These are controlled via the .... WinCC project

Crate

CROC and FE configuration, where are the input cable connected

Tell1

where is the tell1, how to connect to it, what is connected to it, where does it sends its data

Never run the TFC, HRC is our project

vedev01 in the pit it contains the WinCC project

ssh herschel@vedev01NOSPAMPLEASE.cern.ch

Scope

Connect to the scope with rdesktop -f herschelscope01 or rdesktop -g 1200x1000 herschelscope01

username herschel password hrc01

The station's PMTs receives HV and bias from ???. These are controlled via the .... WinCC project -- VictorCoco - 2014-11-19


This topic: LHCb > WebHome > LHCbHerschel > HerschelInTED
Topic revision: r3 - 2014-11-22 - PaulaCollins
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback