-- MariannaFontana - 10 Aug 2009

MoniGUI

This twiki describes how to use MoniGUI that is a graphical user interface based on Root for the offline alignment monitoring which can be found in Quality under the LHCB software project. It is based on the original version of GUI developed for VELO.

How to get MoniGUI

On lxplus using your account

Login to any lxplus machine.

Get and set up the package:

  • getpack Quality/MoniGUI v0r0

  • cd Quality/MoniGUI/cmt

  • cmt config

  • source setup.csh

How to start MoniGUI

Now go into the Quality/MoniGUI/root directory and open Root. To run the tool:

1. Load and execute the macro:

2. Execute directly the macro:

A graphical interface appears with several tabs (one for the PV and one for each subdetector) and buttons.

How to close MoniGUI

Click in the menu Data, then Exit .

How to visualize the monitoring plots

To visualize the plots for the alignment open a Root file:

Click in the menu Data, then Open ROOT file .

Once the file is open choose the tab:

  • Tab for Primary Vertex (drawVertexPlots.C): click on PV to visualize the plots
    • Difference between PV evaluated with tracks reconstructed in the left or in the right half of Velo
    • x, y, z coordinates of PV

  • Tab for VELO (drawVeloPlots.C): click on Misalignment to visualize the plots
    • Misalignment above warning threshold
    • Misalignment significance
    • Clicking on green-red buttons one can show more details for each individual sensor
      • Overview of R and Phi sensors misalignment along x and y evaluated by sinusoidal fit of the residual distribution versus phi (alignOfflineMoni.py)

  • Tab for IT (drawITPlots.C):
    • Number of measurements
    • Residual pull

  • Tab for TT (drawTTPlots.C):
    • Number of measurements
    • Residual pull

  • Tab for OT (drawOTPlots.C):
    • Number of measurements
    • Residual pull

  • Tab for MUON (drawMuonPlots.C):
    • Number of measurements

How to Add new plots

To add or change plots open the correspondent Root macro and modify the method "draw". This method draws a page with a canvas that contains the histograms. In this method one can set the histograms that should be visualized inside. It is possible to visualize any histograms produced by any standard Brunel job.

How to Add new tabs

It is possible to add new tabs for other subdetectors. Open AlignMoniGUI.C:

1. Define the new tab in Constructor;

2. Clear canvases in the tab with the ClearCanvases method;

3. Describe the contents of the tab with a new method (ex. ContentsTabNewTab);

4. Display documentation on the monitoring available in a tab;

5. Handle the buttons in the tab.

Edit | Attach | Watch | Print version | History: r6 < r5 < r4 < r3 < r2 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r4 - 2009-08-12 - MariannaFontana
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    LHCb All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback