---+ Interlock System

PVSS project

The interlocks are handled by the VEDCSHV project (see here)

Starting FSM

See above

Procedure after a powercut

  1. Log on to windows terminal in the online network.
  2. Open the directory G:\online\ecs\Shortcuts\VELO
  3. Double click on VEDCSHV_UI_FSM
  4. The following window appears:
    VEDCSHV_UI_FSM.PNG
  5. expand VELOA/C_DCS
  6. right click on VELOA/C_DCS_TB
  7. take control by cliking the padlock
  8. click on the Interlock circles (repeat the next 9 steps for all the three circles)
  9. you will be prompted with the question "Do you want to change the ELMB state?", answer YES (preoperational)
    ELMB_Preoperational.PNG
  10. You will get the Status_and_Event_reg window.
  11. click on Check status (in commands frame), you will see all channels are masked (the mask box is ticked)
  12. click on reset board, and then load mask configuration (both buttons are in the Commands frame)
  13. check status again and you should see that the 4 interlocks fired.
  14. click on the Send button in the Control Register Reset frame
  15. To make sure that everything is ok (ie that the interlocks have gone) check status again
  16. Close the panel
  17. Switch on the Board again (click in the state of the corresponsing board and select "Switch_ON", in the VELOA/C_DCS_TB panel). The state becomes ready and the status of the ELMB becomes OPERATIONAL.

How to know when an interlock fired?

  • An Easyboard goes into error

What to do when an interlock fired?

  1. Verify that the cooling is operational,
  2. Open the panel VELOA/C_DCS_TB
  3. When an interlock fired because of the Temperature Boards the Interlock circle in the panel VELOA/C_DCS_TB will be RED
  4. click on the Interlock circles (repeat the next 6 steps for all the three circles)
  5. you will be prompted with the question "Do you want to change the ELMB state?", answer YES (preoperational)
    ELMB_Preoperational.PNG
  6. You will get the Status_and_Event_reg window.
    • You will see some red fields in the panel (red fields do not matter when channels are masked);
    • In the status register frame you will see which interlock(s) fired;
    • In the control register reset you will see the corresponding interlocks and errors ticked, and the reset byte field filled with the right bit pattern.
      Status_and_Event_Reg_INTERRUPT.PNG
  7. click on Check status (in commands frame)
    Status_and_Event_Reg_INTERRUPT_TooWarm.PNG
  8. Click on Send in the Control Register Reset frame
  9. Check status again
  10. If you are lucky you will get everything OK (green), if not call an expert.

Trouble shooting (description and documentation for the hardware to be provided)


-- AnnVL - 01 Aug 2008

Edit | Attach | Watch | Print version | History: r5 < r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r2 - 2008-08-04 - AnnVL
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    LHCb All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback