LHCb Background

This page contains information related to machine related background studies in the LHCb experiment.

Additional information can be found on the old webpage.

Mechanisms of background formation

Following Chamonix XV, we consider several different mechanisms of machine background formation. These mechanisms are studied as independent and the effect of the background is estimated separately for each of them.

Beam halo losses at the tertiary collimators

Beam halo that accompanies the circulating beam in the LHC must be absorbed by two cleaning insertions in IR3 and IR7 at the collimators that act as primary aperture limitations in the machine. The uncleaned halo can be lost at other limiting apertures in the machine structure, and in the case of the loss close to the experiment can create machine background. Two tertiary collimators (TCTs) installed close to separation dipoles at each side of the LHCb interaction point provide such aperture restrictions for beam halo losses.

Elastic beam-gas scattering in the LHC arcs

Elastic scattering of the beam at the residual gas nuclei is one of the processes that populates the beam halo. The halo created along the LHC sectors close to the experiment can be lost at the TCTs before it will reach the cleaning insertions. More...

Cleaning inefficiency in IR3 and IR7

Some fraction of beam halo particles may be out-scattered and not absorbed in the cleaning insertions but rather lost at the TCTs downstream. More...

Beam-gas losses in the Long Straight Section

Inelastic interactions of the beam with the residual gas in the Long Straight Section of the LHCb interaction point can create background directly visible in the experiment. More...

Particle collisions in IP1

Elastic proton-proton collisions in the interaction points is another process that contributes to the beam halo. In the case of particle collisions in IP1 the resulting halo can reach the TCTs close to LHCb. More...

Sources of background

Estimation of machine background and its effect for the experiment depends on the combination of machine operational parameters. For each operational scenario there are several source files of the background particles prepared for use in the LHCb simulation.

Year 2009 start-up at 3.5 TeV

There is an attempt to predict the background with the operational parameters as defined for the LHC start-up in 2009. More...

Nominal running conditions at 7 TeV

Nominal running conditions assume perfect machine, clean vacuum, complete collimation scheme and full stored beam energy. More...

Background analysis in the detectors

Analysis of the machine background in the experiment is performed with the set of tools developed within the LHCb simulation framework. More...

Beam Condition Monitors


Beam Loss Scintillators


Velo and IT






These are presentation and reports outside the regular meetings:



Some collection of papers is available also on the old webpage.

-- VadimTalanov - 19-Nov-2009

This topic: LHCb > WebHome > LHCbBackground
Topic revision: r4 - 2009-12-01 - VadimTalanov
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback