Calorimeter data quality survey
In this page are listed all the hardware problems identified during the analysis of
calorimeter data (noise, LED or cosmics)
Problematic channels
List
The problematic channels listed below have been identified thanks to the analysis of
Cosmics and LED data taken in february 2008.
Detailed analysis of the data can be found
here
and
there
.
Irina's survey summary (beg. march 2008) can be found here.
Calo |
Crate |
FEB |
RO channel |
diagnostic |
Data |
seen |
fixed |
Hcal |
22 |
10 |
30 |
dead |
LED/Cosmics |
13/02/08 |
|
Hcal |
23 |
8 |
28 |
dead |
LED/Cosmics |
13/02/08 |
|
Hcal |
22 |
13 [PIN] |
2 |
dead |
LED |
13/02/08 |
|
Ecal |
13 |
2 |
7 |
dead |
LED |
13/03/08 |
|
Ecal |
8 |
5 |
29 |
dead |
LED/Cosmics |
13/02/08 |
20/02/08 PM replaced |
Ecal |
10 |
0 |
21 |
dead |
LED/Cosmics |
13/02/08 |
20/02/08 PM replaced |
Ecal |
11 |
7 |
12 |
dead |
LED/Cosmics |
13/02/08 |
20/02/08 PM replaced |
Ecal |
12 |
2 |
1 |
dead |
LED/Cosmics |
13/02/08 |
13/03/08 no longer pb(?) |
Ecal |
14 |
8 |
6 |
dead |
LED/Cosmics |
13/02/08 |
13/03/08 no longer pb(?) |
Ecal |
9 |
8 |
31 |
dead (FEB pb to be fixed) |
LED/Cosmics |
13/02/08 |
|
Ecal |
14 |
9 |
24 |
dead |
LED/Cosmics |
13/02/08 |
20/02/08 bad connector |
Ecal |
12 |
2->11 |
3,11,19,27 |
low signal |
LED/Cosmics |
13/02/08 |
20/02/08 power line pb |
Ecal |
13 |
2->4 |
7,15,23 |
low signal |
LED/Cosmics |
13/02/08 |
20/02/08 power line pb |
Ecal |
14 |
11->13 |
7,15,23 |
low signal |
LED/Cosmics |
13/02/08 |
20/02/08 power line pb |
Ecal |
11 |
8 |
4->7, 12->15, 20->23, 28->31 |
low signal (bad timing ?) |
LED |
13/02/08 |
|
Ecal |
11 |
9 |
0->3, 8->11, 16->19, 24->27 |
low signal (bad timing ?) |
LED |
13/02/08 |
|
Ecal |
11 |
7 |
12 |
hot |
Cosmics |
02/2008 |
20/02/08 found dead - PMT replaced |
Ecal |
13 |
12 |
9 |
hot |
Cosmics |
02/2008 |
20/02/08 found dead - PMT replaced |
Ecal |
14 |
7 |
28 |
very hot |
Cosmics/High trigger rate |
13/02/08 |
20/02/08 found dead - PMT replaced |
Ecal |
14 |
8 |
7 & 15 & 23 & 31 |
very hot |
Cosmics/High trigger rate |
13/02/08 |
|
Ecal |
14 |
9 |
13 |
hot |
Cosmics/High trigger rate |
13/02/08 |
|
Ecal |
14 |
9 |
21 |
hot |
Cosmics/High trigger rate |
13/02/08 |
20/02/08 found dead - PMT replaced |
Hcal |
22 |
8 |
6-7 & 14-15 & 22-23 & 30-31 |
hot |
Cosmics |
13/02/08 |
|
Hcal |
23 |
6 |
31 |
hot |
Cosmics |
13/02/08 |
|
Hcal |
23 |
7 |
10 & 18 & 26 |
hot |
Cosmics |
13/02/08 |
|
Figures
- DEAD AND LOW SIGNAL CHANNELS : Ecal (right) LED scan : ADC (summed over 5 consecutive BX) as a function of FEB and channel
- DEAD CHANNELS : Hcal (left) and Ecal (right) LED scan : ADC (summed over 3 consecutive BX) as a function of FEB and channel
- HOT CHANNELS : Hcal (left) and Ecal (right) L0 trigger : ADC as a function of FEB and channel
- HOT Ecal channels
DAQ problems
List
- problem of transmission with ecTell07 (time to time wrong header and/or wrong L0ADC/ADC)
- 1 uncorrect L0ADC/ADC observed with ecTell04
- problem with FEB#6 in Prs0 (psTell01) : wrong header with CrateID/FEBId=0
- problem with 4 FEB in Prs2 (FEB#4,5,6,7) --> faulty PGA of psTell03 ?
Figures :
- PRS C-side
- L0ADC/ADC matching
Wrong settings
List
- Ecal and Hcal PIN-diode signal is shifted ~ -2 BX with respect to PMT signal
- Ecal PIN-diode signal for BOX#5 and BOX#6 additional ~ -2BX delay (10m cable vs 17m cable)
- CROC & TELL1 BCIDs not aligned -> production of error banks : BCID offset to be set
--
OlivierDeschamps - 26 Feb 2008