$WCCOAui -proj SFHV -p /group/sf/wincc/fwComponents_SFHV/panels/fwDeviceEditorNavigator/fwDeviceEditorNavigator.pnl & -> Hardware tab ->sfcaenpshv01 -> Crate status tab (see screenshot)
Check OPC client in project: Check in Console ($startConsole) that the OPC UA Client on manager #6 is running (see screenshot). Restart if necessary. (Important: Don't confuse with OPC DA Client! This should be off.)
Restart OPC server:
in full config mode with pre-generated config file for assembly hall: /localdisk/scifi/OpcUaRunDir/startServerFullConfig.sh
in hardware discovery mode (if setup has changed): /localdisk/scifi/OpcUaRunDir/startServerAutoDiscovery.sh
This will work if the server is not running; can check with $ps aux | grep -i opc. If you still need to restart, the other instance needs to be killed first.