General Information
1. You need a DESY indico account. This is not your CERN indico account. It takes a couple hours for someone to approve it. Then fill in the Registration form for the LHCb SciFi testbeam. Both actions can be done through this link: https://indico.desy.de/confUser.py?confId=16599
2. There is a hostel on the DESY site. You can register for it here:
http://guest-services.desy.de/e17/req1/index_eng.html
The DESY-Group is "FH-Test Beam".
3.The dates are 13.02.2017 to 26.02.2017
4. There is a mandatory safety instruction on 13.02. or 20.02. at 13:00. You cannot enter the area without it. You will receive your access card after the training.
Further information about the area can be found here: http://particle-physics.desy.de/test_beams_at_desy/tb_rules__safety_instructions/index_ger.html
5. The plan will be to arrive at least by late Monday morning, do the safety training at 13:00, get our cards, and setup in the remaining evening and Tuesday.
Beamline Information
General information can be found here: http://testbeam.desy.de/
Description of the beam:
https://www.eudet.org/e26/e28/e182/e283/eudet-memo-2007-11.pdf
https://www.eudet.org/e26/e28/e182/e580/eudet-memo-2007-50.pdf
Logbook
Copy of DAQ Logbook
Data Backup
Data is backed up to CERN EOS under /eos/lhcb/testbeam/scifi/tb2017_1Useful infos
Useful infos to run threshold calibration are stored in the attachments- thresholdCalibration.pdf: Description of how to obtain the correct thresholds for the PACIFIC
- thresholdCalibration.tex: Description of how to obtain the correct thresholds for the PACIFIC
Run Plan
last updated: 20.02.2017| Testbeam Plan | |||||||
| Threshold | PACIFIC setting | Module position | Electron energy | Complete | |||
| Y | X | Overvoltage | |||||
| 0.5/1.5/2.5 | 4 | -10 | -24.2 | 3.5 | 2 | Done | 2M events per setting |
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 4 | -10 | -24.2 | 3.5 | 2 | Done | |
| 0.5/1.5/2.5 | 3 | -10 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 3 | -10 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 3 | -10 | -24.2 | 3.5 | 2 | Done | |
| 0.5/1.5/2.5 | 4 | 390 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 4 | 390 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 4 | 390 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 3 | 390 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 3 | 390 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 4 | 790 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 4 | 790 | -24.2 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 3 | 790 | -14.8 | 3.5 | 2 | Done | |
| 0.5/1.5/2.5 | 3 | 790 | -14.8 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 3 | 790 | -14.8 | 3.5 | 2 | Done | |
| 0.5/1.5/2.5 | 4 | 790 | -14.8 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 4 | 790 | -14.8 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 4 | 790 | -14.8 | 3.5 | 2 | Done | |
| 0.5/1.5/2.5 | 3 | 390 | -20 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 3 | 390 | -20 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 3 | 390 | -20 | 3.5 | 2 | Done | |
| 0.5/1.5/2.5 | 4 | 390 | -20 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 4 | 390 | -20 | 3.5 | 2 | Done | |
| 1.5/2.5/4.5 | 4 | 390 | -20 | 3.5 | 2 | Done | |
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 3.5 | 1 | Done | 500k (450Hz, not determined well) |
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 3.5 | 3 | Done | 2000k (420Hz, mean over 10min.) |
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 3.5 | 6 | Done | 3000k (33 Hz) |
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 3.5 | 4 | Done | 500k (also ~450Hz) |
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 3.5 | 5 | Done | 500k (also ~450Hz) |
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 3.0 | 2 | ||
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 4.5 | 2 | ||
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 5.5 | 2 | ||
| 1.5/2.5/3.5 | 4 | -10 | -24.2 | 6.5 | 2 | ||
| 0.5/1.5/2.5 | 3 | 1790(?) | ? | 3.5 | 2 | ||
| 1.5/2.5/3.5 | 3 | 1790(?) | ? | 3.5 | 2 | ||
| 1.5/2.5/4.5 | 3 | 1790(?) | ? | 3.5 | 2 | ||
| 0.5/1.5/2.5 | 4 | 1790(?) | ? | 3.5 | 2 | ||
| 1.5/2.5/3.5 | 4 | 1790(?) | ? | 3.5 | 2 | ||
| 1.5/2.5/4.5 | 4 | 1790(?) | ? | 3.5 | 2 | ||
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 20 degrees | |
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 10 degrees | |
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 3 degrees | |
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 15 degrees | |
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 25 degrees | |
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 20 degrees | |
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 6 degrees | |
| 1.5/2.5/3.5 | 4 | -10 | ? | 3.5 | 2 | 5 degrees | |
- thresholds_PACIFIC_week1.pdf: The manually corrected thresholds for both PACIFICs for setting3 and setting4 (testbeam week 1)
| I | Attachment | History | Action | Size | Date | Who | Comment |
|---|---|---|---|---|---|---|---|
 pdf |
thresholdCalibration.pdf | r2 r1 | manage | 107.8 K | 2017-02-18 - 22:27 | DavidGerick | Description of how to obtain the correct thresholds for the PACIFIC |
 tex |
thresholdCalibration.tex | r2 r1 | manage | 7.0 K | 2017-02-18 - 22:28 | DavidGerick | Description of how to obtain the correct thresholds for the PACIFIC |
 png |
eventdisplay.png | r1 | manage | 638.6 K | 2017-02-20 - 19:00 | BlakeLeverington | event display |
| tex |
Introductioncopia.tex | r1 | manage | 4.8 K | 2017-02-17 - 16:59 | MariaElenaStramaglia | |
| pdf |
PACIFIC010_56v8_gain2_ch16.pdf | r1 | manage | 31.2 K | 2017-02-20 - 19:32 | BlakeLeverington | |
| pdf |
UsefulInfos.pdf | r1 | manage | 912.6 K | 2017-02-17 - 16:59 | MariaElenaStramaglia | |
| pdf |
calib.pdf | r1 | manage | 829.7 K | 2017-02-17 - 16:59 | MariaElenaStramaglia | |
| pdf |
thresholds_PACIFIC_week1.pdf | r1 | manage | 33.4 K | 2017-02-20 - 11:00 | DavidGerick | The manually corrected thresholds for both PACIFICs for setting3 and setting4 (testbeam week 1) |
This topic: LHCb > WebHome > LHCbUpgrade > UpgradeSciFiTracker > SciFiTrackerTestBeam > SciFiTrackerTestBeamFeb2017
Topic revision: r20 - 2017-02-20 - BlakeLeverington
Copyright &© 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback