Clearing an interlock

  1. From the VELOC_DVCS_TB top panel click on the red button.
  2. The following window should appear:
    ELMB_Preoperational.PNG

  3. Click YES and change the state of the ELMB to PREOPERATIONAL.
  4. The following panel should appear Status_and_Event_Reg_INTERRUPT.PNG

  5. Click on the button "Check Status"
  6. The panel look something like the following:
    Status_and_Event_Reg_INTERRUPT_TooWarm.PNG

  7. Click on Send.
  8. Check status again.
  9. Everything should be green.

-- MarkTobin - 30 Apr 2008


This topic: LHCb > WebHome > LHCbVELO > VELOOperatingManuals > LowVoltage > VELOLVBasic > VELOLVClearInterlock
Topic revision: r2 - 2008-08-19 - MarkTobin
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback