Getting Started

  1. Log on to windows terminal in the online network.
  2. Open the directory G:\online\ecs\NewShortcuts\VELO
  3. Double click on VEDCSHV_UI_FSM
  4. The following window appears:
    VEDCSHV_UI_FSM.PNG

  5. To operate a module on the C side rightclick on VELOC_DCS
    VELOC_DCS_TOP.PNG

  6. Take control of the project by left clicking on the padlock next to VELOC_DCS on the panel and then clicking Take in the panel which appears.
    VELOC_DCS_TAKE.PNG

  7. Double click on the VELOC_DCS_LV button.
  8. The following panel should appear:
    VELOC_DCS_LV_TOP.PNG

  9. If the button next to VELOC_DCS_LV_ConfDB is NOT_READY then click this button.
    VELOC_DCS_LV_ConfDB.PNG

  10. The following panel should appear. Click Send PHYSICS.
    VELOC_DCS_LV_ConfDB_PHYSICS.PNG

  11. The panel should now look like this:
    VELO_DCS_LV_OFF.PNG

  12. Switch on the 48V supply - click on button next to VELOC_DCS_LV_PS
    VELOC_DCS_LV_PS.PNG

  13. Send the RUN_TYPE PHYSICS.
    VELOC_DCS_LV_PS_PHYSICS.PNG

  14. VELOC_DCS_LV_PS should now be READY.
    VELOC_DCS_LV_PS_READY.PNG

-- MarkTobin - 06 Aug 2008


This topic: LHCb > WebHome > LHCbVELO > VELOOperatingManuals > LowVoltage > VELOLVBasic > VELOLVGettingStarted
Topic revision: r6 - 2008-08-19 - MarkTobin
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback