Velotest for Beam-monitor
Responsible: Massimiliano Ferro-Luzzi
Acquisition
Data are acquired onto pcvelo01 (login as local user
velo
)
The login will setup Online v4r6 in /home/velo/cmtuser
Datataking can be started with the hltrx.sh script or with startRun (not working yet)
Data will be written onto /scratch/velodata
This area is replicated to castor using tbct.py (not started yet) onto /castor/cern.ch/lhcb/testbeam/lhcbvelo/2008/
The user account used for copying the data is
lhcbvelo
. tbct.py is part of the local crontab on pcvel01
TELL1
The TELL1 is pctell028. It is currently running firmware 2.0. Login as user velo. The config files are in the
massi
directory.
Data sending is started by running
daq_tell1
Troubleshooting
- Currently pcvelo01 needs AFS running and pctell028 runs from lbonccpc01. In case of failure verify these network connections first
--
NikoNeufeld - 25 Feb 2008