Daily Notes at LPC

Here you can find a record of almost all my activities in a chronological order since February 25th. Before that I had all my stuff in papers, in post its, in little notes and my mind so I will try to put that information directly in the CalorimeterTriggerUpgrades twiki.

Monday, February 25th, 2013

First I have to make the necessary corrections in order to get the tree for the zerobias RAW data. Think about these topics:

  • If the makeRatesTreesCrab_cfg.py file is changed, the complete CMSSW_X_X_X has to be re built. Sometimes I got troubles when I forget this.
  • Is not OK send jobs to the grid if you are not sure about what are you doing or if not sure about your code does
  • Test your code with a few data with cmsRun and look if the results is close to what you want before sent your job to the grid
I have to complete the script for do the matching between the reco and the raw files. Choose the best match in the whole loop, keep it in an array, organize the array from minor to major and then choose the smallest value. That is the best candidate.

Have to study the UCT2015EClusterProducer.cc for tomorrow’s (Tuesday, February 26th) meeting.

Tuesday, February 26th, 2013

Continue the study of the UCT2015EClusterProducer.cc code for today’s meeting. The main change is in fact a geometry change in the ECAL, because now we want more detail and the seed used is 1x1 instead the 2x1 used before.

The terminal is still joining all the root files created yesterday in the Job 20 (zerobias1234_raw_run198609_tree.root).

The merge process has finished and now I have zerobias1234_raw_run198609 tree.root file in the 20th job in the output folder.

Wednesday, February 27th, 2013

The test with the root file generated yesterday are OK and I guess are ready to put as the input of the matching script ( Status: still under construction!! ).

The main problem is find the correct candidate because it takes a lots of time iterate one by one and choose a match ( Need more ideas )

For today is good if I can develop a script that plots L1, UCT2015 and STAGE1B in the same plot.

Thursday, February 28th, 2013

The authors of the main project updated to a new version, so I deleted the CMSSW535 and installed again with the new tags ( version V00-02-00 ) and plottersC from Andres’ repository.

At least compile!

Now try to produce some Efficiency plots. I got the skim for makeEfficiencyTree from: /store/data/Run2012C/DoubleElectron/RAW-RECO/Zelectron-PrompSkim-
v2/000/198/230/0000/....root

Until now is a “problem” in stage1B because always is zero the values of Pt.

On the other hand the data for makeRates has to be a zerobias raw because it’s high pile up, so I will try to run that with the data from: /pnfs/cms/WAX/11/store/data/Run2012C/ZeroBias1/RAW/v1/000/198/609/ and try this time with the first file here.

Wrong! There is an error like:
"Running path p1
calling event method for module RateTree/ ’rlxTauUCTRatesStage1B’
Exception message: cant find the key puLevel in the UCTCandidate, sorry"

Until I can fix that, follow with the Efficiency studies and try to figure it out why that zero appears?

Friday, March 01, 2013

Try to plot the relative efficiencies in the same canvas: Current vs L1 and current vs L1B

Monday, March 04, 2013

Plots proposed on Friday afternoon are ready, just have to put a different color in each one because they are almost equal. Cannot find the right color command.

The plot contains the efficiency resolutions for the Current stage, for the UCT2015 Stage and for the UCT2015 Stage 1B.

Ready resolutions for Eta, Phi and Pt, but they are very similar, so it is important to set different colors for the superimposed plots.

Command color found but are still so difficult to distinguish each one.

Think about:

  • Where -1 comes from?
  • Need more statistics!

Tuesday, March 05, 2013

Start again because a problem with the PC.

Now I am using more data in order to get more entries in the histograms and a better statistic.

Now I have two kind of plots for Pt, Eta and Phi:

  • In a column, the current on top, Stage1 in the middle and Stage 1B at the bottom.
  • A superimposed plot of Stage1 and Stage1B, so you can see the differences.
Improve the script.

Wednesday, March 06, 2013

Now I have all the stuff created yesterday in a script, so, it is easier make test, add and remove lines.

Have to make the normalization of the plots and then compare and evaluate the implications.

Having troubles with the normalization process.

Starting the troubles with my laptop...

Thursday, March 07, 2013

After a lot a troubles the code compiles and is "almost" efficient. The normalization process is complete and the first plots are ready.

The first three are for a comparative view of the Current stage vs Stage1 vs Stage1B. The last three are for Stage1 and Stage1B superimposed in the same plot.

Friday, March 08, 2013

Try some different cuts and axis scales in order to understand the generated plots.

Study the code for plot Efficiencies. Two options, the code provided by the UCT2015 package and wrote in python or the modifications made by Andres in C++.

Monday, March 11, 2013

Make a presentation with the most representative plots obtained last week.

Study UCT2015Stage1BProducer and UCT2015ClusterProducer code for tomorrow's meeting

Tuesday, March 12, 2013

Presentation completed. Received comments, changes and topic to improve the current study.

How about the new seed in Stage1B ? How many towers has?

Make more test with the "same treshold" for UCT2015Producer and for UCT2015Stage1BProducer but there is something that do not work.

Using edmConfigEditor ( plus a py configuration file ) for make the changes and try to find out the error.

Wednesday, 13 March, 2013

Finally arrived my new laptop!!!

Using the day to install Linux, all the necessary tools and try to recover the data from the old one ( RIP )

Thursday, March 14, 2013

Some time at library reading about beta decay, pi mesins, muons, taus and detector's physics. Interesting topics. More lecture is necessary!

Continue the test changing some parameters on configuration files for a electrons skim.

Not good results until now...

Finally a good run!

Friday, March 15, 2013

These plots are the result of run Stage1 and Stage1B in the "same configuration".

EtaResolutionL1L1B-SI4.png

PhiResolutionL1L1B-SI4.png

PtResolutionL1L1B-SI4.png

As we can see, in Pt resolution the shift between the two stages is bigger than before. This results were the result of change some tresholds. This changes has the purpouse of give the same parameters for the Stage1 and for Stage1B.

More study is needed to determine the origin of that shift...

In other hand I prepared the same analysis with isolated branches ( every analysis until now was realized with relaxed branches ) and the resultas present the same shift. The outputs before make the changes for have the "same tresholds" are:

IsoEtaResolutionL1L1B-SI.png

IsoPhiResolutionL1L1B-SI.png

IsoPtResolutionL1L1B-SI.png

and the output after make those changes are:

IsoEtaResolutionL1L1B-SI1.png

IsoPhiResolutionL1L1B-SI1.png

IsoPtResolutionL1L1B-SI1.png

and as the same as we saw in the relaxed case, the shift between Stage1 and Stage1B increases.

Monday, March 18, 2013

In order to study the isolation variables I have to run the Stage1B Producer in grid using a skim of electrons ( zelectrons_rawreco__files_2012C-V2.txt ) and a background sample ( minimumBias_2012D_HL_RawReco.txt ).

I had to modify the code for have four more histograms as an output of UCTStage1BProducer. The isolation variables are:

  • relativeJetEMIsolation
  • relativeRgnEMIsolation
  • relativeJetIsolation
  • relativeRgnIsolation
Now with both outputs I can create an script for analyze the isolation variables for the electrons and for the background at the same time, compare and plot them together.

The first plots:

  • egRelativeEMJetIsolation.png
  • egRelativeEMRgnIsolation.png
  • egRelativeJetIsolation.png
  • egRelativeRgnIsolation.png
After some plots and weird results I realized that those variables were not enough, so was neccesary add the variables that compute that ones are:
  • emCluster
  • jetEMIsolation
  • rgnEMIsolation
  • jetIsolation
  • rgnIsolation
Additional plots:
  • emCluster.png
  • jetEMIsolation.png
  • rgnEMIsolation.png
  • jetIsolation.png
  • rgnIsolation.png
Final plots:
  • IsoVar-EGRelativeEMJetIsolation.png
  • IsoVar-EGRelativeEMRgnIsolation.png
  • IsoVar-EGRelativeJetIsolation.png
  • IsoVar-EGRelativeRgnIsolation.png
After this plots I can confirm that something is wrong! Shows negative quantities, but all has to be possitive ( at least in this case and omitting the default/debugging values ).

Go back to the code, search those variables, follow the track and try to understand the results. Pending more analysis...

Starting the analysis between Current Stage, Stage1 and Stage1B.

The result was not what I hope. Definitely there is something wrong with the code.

  • Efficiency-ForCurStg1Stg1B.png

Tuesday, March 19, 2013

Start looking the bugs in the code.

Meeting with Andres, Fan, Kalanand and Sergo for present the results and try to find out why the plots are like this.

Some ideas about how to find the errors:

  • wrong comparisons
  • logical mistakes
  • "obvious" bugs
  • wrong thresholds
Study the code and prepare a list of questions for the meeting with Sridhara Dasu tomorrow.

Wednesday, March 20, 2013

Meeting with the UCT2015 developer Sridhara Dasu, Andres, Kalanand and Sergo. Present the results to him and try to understand what is happening?

The result of the meetong is that in fact the code was wrong and has to be corrected.

Prepare and send an email to the person who works with the CVS.

Thursday, March 21,2013

Some parts of the code was fixed and now I have to repeat the studies, runs and get the same plots.

First start in a new area and install all the necessary code ( CMSSW_5_3_5 ).

After running my scripts, at least in efficiencies, the plots looks fine:

  • Efficiency-CurStg1Stg1B-01.png
In the isolation variables still is something that do not work well:
  • IsoVar-EGRelativeEMJetIsolation-01.png
  • IsoVar-EGRelativeEMRgnIsolation-01.png
  • IsoVar-EGRelativeJetIsolation-01.png
  • IsoVar-EGRelativeRgnIsolation-01.png

Friday, March 22, 2013

Study of isolation variables and try to understand:

  • why we get negative values?
  • why apears a shift?

Monday, March 25, 2013

Look into the size of each isolation variable and the way it is defined:

  • rgnEMIsolation: 4 x 4 / 3 x 3
  • jetEMIsolation: 12 x 12 / 3 x 3
  • rgnIsolation: 4 x 4 / 3 x 3
  • jetIsolation: 12 x 12 / 3 x 3

Tuesday, March 26, 2013

The code was modified again and looks great.

Finish the efficiencies plots and starting looking the rates.

Wednesday, March 27, 2013

Looking for information about Hadron Outer scintillators.

Prepare a *.tar file with all the plots I got on the studies and send to Andres for make a pdf and send to Sridhara and Evan ( responsives for the code ) for comments.

It looks really well!

Thursday, March 28, 2013

Plot many comparatives in isolation variables with a skim of electrons and modify the script until get the correct plots.

To get this, I had to send to the local grid. Waiting for the results.

Friday, March 29, 2013

Work with the results got yesterday and now make a similar analysis in the grid, but this time for a minimum bias sample.

Waiting for the results.

The new plots for isolation variables are:

  • IsoVar-EGRelativeEMJetIsolation-02.png
  • IsoVar-EGRelativeEMRgnIsolation-02.png
  • IsoVar-EGRelativeJetIsolation-02.png
  • IsoVar-EGRelativeRgnIsolation-02.png
now we see that all of them are completely possitive.

Monday, April 01, 2013 - Friday, April 05, 2013

This week is for repeat the performance studies in a final state, i.e, with all the UCT2015 Code in the last version and without buggs ( I hope so! )

This test includes plots for Efficiencies, Rates, Resolutions ( of Pt, Eta and Phi), Isolation variables and a final presentation to the L1 Trigger Upgrade Studies Group at LPC on Monday 8.

The main difference between this last study and the older ones is the size of the processed data. In the previous versions we deal with relative small samples of particles ( skim of electrons, taus, minimum bias, zero bias ) and now we have big files.

The scripts has been corrected and runs really good.

Monday, April 08, 2013

A close look to the basics of HO Studies.

I found a paper ( from Fermilab ) that gives a brief description about the Hadron Outer scintillators but need more information.

Another necessary topic is the Particle Gun and here I can find a first overview ( https://twiki.cern.ch/twiki/bin/view/CMSPublic/SWGuideParticleGuns )

Tuesday, April 09, 2013

Presentation about performance studies to the L1 Trigger Upgrade Studies Group.

The conclusion is that could be interesting if we can get our own WP ( working point ) making some changes in the default values in Isolation Variables. The idea is make plots for efficiency and rates for each change that we do, then we can compare the different plots and chosse the ideal value for the variables we are interested in.

Wednesday, April 10, 2013

The efficiency plots are ready and I can choose my "favorite candidates" until now but I have to wait for the rates plots.

I have some troubles with the rates. The script for rates works really good for isolated and relaxed branches and, theoretically if I use the relax branches and then apply some isolation cuts I have to obtain a similar result as if I work with isolation branches directly, but I am not getting that!

Thursday, April 11, 2013

I am still working on the rates script and triying to figure it out why the plot fails. Maybe the tree does not contain or is not keeping the correct information.

Friday, April 12, 2013

Finally the script for the rates is complete!

To access to "isolation variables" is necessary make some modifications in UCTRateTree.C file. First you have to add additional variables for represent what you want to access and then treat them as the other variables you find there.

Monday, April 15, 2013

Prepare a presentation based on the different plot for Efficiencies and Rates in order to choose the best working point.

Make a table with the values of Efficiency and Rates for 20 and 30 GeV

  • EG-rlx-Eff-IsoVar-20GeV-001.png
  • EG-rlx-Eff-IsoVar-30GeV-001.png
  • EG-rlx-Rat-IsoVar-20GeV30GeV-001.png

Tuesday, April 16, 2013

Feedback. We almost have a good working point and until now we have some candidates ( 2 or 3 ).

It is necessary to add the PileUp Subtraction criteria for improve the working point candidates.

Wednesday, April 17, 2013

Add the PileUp Subtraction to the rates script.

The is some problem but it is hard to find because the code compiles well and there is no error or warning.

Thursday, April 18, 2013

Stil having troubles with the rates, they do not produce what I want.

Finally the rates script is ready!

Now, add the PileUp subtraction to the Efficiencies script.

Friday, April 19, 2013

Prepare a presentation for the LPC L1Trigger Upgrade Studies Group (Andres, Fan, Kalanand, Sergo)

Presentation is ready for today's meeting.

  • EG-rlx-Eff-IsoVarPUS-20GeV-001.png
  • EG-rlx-Eff-IsoVarPUS-30GeV-001.png
  • EG-rlx-Rat-IsoVarPUS-20GeV30GeV-001.png

Monday, April 22, 2013 - Friday, April 26, 2013

Modifications, improvements, details, labels, axis names were made to the presentations.

Monday, April 29, 2013 - Friday, May 03, 2013

This week was dedicated most of the time to learn how to develop a "producer" in order to make some progress in the HO Project.

For the L1Trigger Upgrade Project this week was really important because I made a lot of progress. I made a lot of debuging in my own code and also I divided it into small scripts and that makes more modular the production of plots for performance studies.

Finally on friday I made a presentation for the LPC L1 Trigger Upgrade Studies Group and as a result I have more work to do looking at iso branches and maybe taus.

Also on friday we said good bye to a good man, teacher and friend, Andres Osorio... Thank you very much for all the patience, concern, advices, friendship and help...

I want the best for you and your family. Good luck in your new project!

Monday, May 06, 2013

Looking for a data sample that contains:

There are some runs that may contain high pileup ( not sure ): 179828, 198588, 198603 and 198609.

Tuesday, May 07, 2013

Now looking for a data sample that contains:

  • Zerobias
  • RAW-RECO
  • High Pileup
After many attempts looking for these characteristics I got a ".root" file but it is less than useless because the file has not enough entries. So, now the objective is find more data.

Wednesday, May 08, 2013

Is it possible combine plots from different datasets? Look some references.

Thursday, May 09, 2013

In order to understand the behavior of the variables that we are studying will be useful include a high pile up sample in the current plots. The problem is that we do not have RAW-RECO data with high pile up. The solution is make a combination of plots from different datasets in the same canvas.

Friday, May 10, 2013

Read the new documentation for the HO Project

Monday, May 13, 2013

Start reading "Measurement of inclusive W and Z boson cross section in pp collisions at sqrt(s) = 8 TeV". The paper version, the PAS version and the analysis notes.

Tuesday, May 14, 2013

Reading day: "HO material" (six papers until now) and "cross section analysis" (three documents) material.

Wednesday, May 15, 2013

Prepare a list of questions about HO and cross section analysis.

Thursday, May 16, 2013

Meeting with the LPC L1 Trigger Upgrade Studies Group. Discussion about new modifications in the code for have "better" working point candidates.

The proposed changes are:

  • relax the pileup cut (5GeV instead of 10GeV)
  • flip the efficiency plots
  • make the table of results just for 20GeV
  • the new values for the isolation variables are: 0.05, 0.1, 0.15

Friday, May 17, 2013

HO reading and some cross section analysis.

Monday, May 20, 2013

Start the production of the new trees for relax the pileup subtraction. Prepare the input files, the configuration files, the submit script and send all the stuff to run in the grid.

Tuesday, May 21, 2013

Continue with the production of the trees.

Monday, July 01, 2013

In the pasts weeks, after some presentations to the L1trigger Upgrade Studies Group we got some conclutions:

  • the cuts applied to the I_J and I_R variables were good and help us to discard I_R, because its behavior does not affect (affect in fact, but in a really tiny scale) the performance of the trigger, so now, all the efforts are focused in I_J
  • something is weird in the rates plots. The plots with the cuts in I_J are consistent and shows the behavior that we are expecting, but the rates plots are "over/mis" measured and shows numbers that to high/low, depending of the case, so the plan is to surf trough the code and figure it out if in some place we are including some extra cuts or maybe to in the wrong way the integration
  • also plot some ROC curves to show the behavior of the efficiency of the signal versus the efficiency of the background. To compute the efficiencies is necessary to use a skim of electrons (signal) and a minimumbias sample (background)
The way to compute the rates is the following (this is a brief description of what does the algorithms):

1. Iterate over events

2. Find the level-1 objects. Here we have three posibilities:

  1. do not exist level-1 objects
  2. exist only one level-1 object
  3. exist more than one level-1 object
and of course, we have three possible responses:
  1. skip the event
  2. pick this one
  3. pick the one with the highest Pt
3. Check the Pt of the level-1 object: Pt (electron or gamma) > 20 gev && I_J < 0.1

4. Plot Pt (just for some help at this point)

5. Integrate the Pt of the level-1 object

6. Fill an histogram with the integration values.

Tuesday, July 02, 2013

In order to finish the roc curve task I need efficiency trees with more events, because there is not enough statistics to see any behavior. The way to do that is generate those trees with a new dataset for electrons and minimimbias. So the plan is find some good root files that contains the information that I need.

Topic attachments
I Attachment History Action Size Date Who Comment
Texttxt AdditionalVariables-makeEfficiencyTree_cfg.py.txt r1 manage 23.6 K 2013-05-28 - 17:59 CristianVega  
Texttxt CVEGA-AdditionalVariables-makeRateTrees_cfg-GANGA.py.txt r1 manage 8.5 K 2013-06-17 - 17:06 CristianVega  
C source code filec CVEGA-ROCCurveTest.C r1 manage 3.5 K 2013-06-24 - 21:19 CristianVega  
PNGpng EG-rlx-Eff-IsoVar-20GeV-001.png r1 manage 52.5 K 2013-04-22 - 18:39 CristianVega  
PNGpng EG-rlx-Eff-IsoVar-30GeV-001.png r1 manage 55.6 K 2013-04-22 - 18:39 CristianVega  
PNGpng EG-rlx-Eff-IsoVarPUS-20GeV-001.png r1 manage 45.8 K 2013-04-22 - 18:39 CristianVega  
PNGpng EG-rlx-Eff-IsoVarPUS-30GeV-001.png r1 manage 44.0 K 2013-04-22 - 18:39 CristianVega  
PNGpng EG-rlx-Rat-IsoVar-20GeV30GeV-001.png r1 manage 106.0 K 2013-04-22 - 18:39 CristianVega  
PNGpng EG-rlx-Rat-IsoVarPUS-20GeV30GeV-001.png r1 manage 112.6 K 2013-04-22 - 18:39 CristianVega  
PNGpng EG-rlx-Rates-Iso-PUS-8-IJ-0033.png r1 manage 18.0 K 2013-07-01 - 18:22 CristianVega  
PNGpng EG-rlx-Rates-Iso-PUS-8-IJ-01.png r1 manage 18.3 K 2013-07-01 - 18:22 CristianVega  
PNGpng EG-rlx-Rates-Iso-PUS-8.png r1 manage 18.0 K 2013-07-01 - 18:22 CristianVega  
PNGpng Efficiency-CurStg1Stg1B-01.png r1 manage 14.8 K 2013-03-21 - 19:22 CristianVega  
PNGpng Efficiency-ForCurStg1Stg1B.png r1 manage 14.7 K 2013-03-21 - 22:22 CristianVega  
Unknown file formateps EtaResolutionCurrentL1L1B.eps r1 manage 16.6 K 2013-03-12 - 00:29 CristianVega  
JPEGjpg EtaResolutionL1L1B-SI3.jpg r1 manage 27.1 K 2013-03-12 - 00:29 CristianVega  
PNGpng EtaResolutionL1L1B-SI4.png r1 manage 17.5 K 2013-03-15 - 17:36 CristianVega  
Unknown file formateps EtaResolutionL1L1B.eps r1 manage 7.7 K 2013-03-04 - 20:22 CristianVega  
Texttxt HO.txt r1 manage 3.6 K 2013-04-04 - 21:41 CristianVega  
Texttxt HOLoop.py.txt r1 manage 3.0 K 2013-05-30 - 22:19 CristianVega  
Compressed Zip archivezip IJIR.zip r1 manage 52.7 K 2013-05-09 - 21:04 CristianVega  
PNGpng IsoEtaResolutionL1L1B-SI.png r1 manage 17.7 K 2013-03-15 - 21:41 CristianVega  
PNGpng IsoEtaResolutionL1L1B-SI1.png r1 manage 17.5 K 2013-03-15 - 21:31 CristianVega  
PNGpng IsoPhiResolutionL1L1B-SI.png r1 manage 17.7 K 2013-03-15 - 21:41 CristianVega  
PNGpng IsoPhiResolutionL1L1B-SI1.png r1 manage 17.5 K 2013-03-15 - 21:31 CristianVega  
PNGpng IsoPtResolutionL1L1B-SI.png r1 manage 15.5 K 2013-03-15 - 21:41 CristianVega  
PNGpng IsoPtResolutionL1L1B-SI1.png r1 manage 15.8 K 2013-03-15 - 21:31 CristianVega  
PNGpng IsoVar-EGRelativeEMJetIsolation-01.png r1 manage 16.4 K 2013-03-21 - 23:09 CristianVega  
PNGpng IsoVar-EGRelativeEMJetIsolation-02.png r1 manage 16.4 K 2013-03-29 - 21:27 CristianVega  
PNGpng IsoVar-EGRelativeEMJetIsolation.png r1 manage 17.1 K 2013-03-21 - 21:16 CristianVega  
PNGpng IsoVar-EGRelativeEMRgnIsolation-01.png r1 manage 16.6 K 2013-03-21 - 23:00 CristianVega  
PNGpng IsoVar-EGRelativeEMRgnIsolation-02.png r1 manage 16.1 K 2013-03-29 - 21:27 CristianVega  
PNGpng IsoVar-EGRelativeEMRgnIsolation.png r1 manage 16.9 K 2013-03-21 - 21:16 CristianVega  
PNGpng IsoVar-EGRelativeJetIsolation-01.png r1 manage 15.3 K 2013-03-21 - 23:00 CristianVega  
PNGpng IsoVar-EGRelativeJetIsolation-02.png r1 manage 15.3 K 2013-03-29 - 21:27 CristianVega  
PNGpng IsoVar-EGRelativeJetIsolation.png r1 manage 16.3 K 2013-03-21 - 21:16 CristianVega  
PNGpng IsoVar-EGRelativeRgnIsolation-01.png r1 manage 17.0 K 2013-03-21 - 23:00 CristianVega  
PNGpng IsoVar-EGRelativeRgnIsolation-02.png r1 manage 17.2 K 2013-03-29 - 21:27 CristianVega  
PNGpng IsoVar-EGRelativeRgnIsolation.png r1 manage 16.1 K 2013-03-21 - 21:16 CristianVega  
Texttxt Kalanand-ROCCurvesC.txt r1 manage 3.0 K 2013-06-19 - 21:53 CristianVega  
Unknown file formateps PhiResolutionCurrentL1L1B.eps r1 manage 17.5 K 2013-03-12 - 00:29 CristianVega  
JPEGjpg PhiResolutionL1L1B-SI3.jpg r1 manage 26.9 K 2013-03-12 - 00:29 CristianVega  
PNGpng PhiResolutionL1L1B-SI4.png r1 manage 17.4 K 2013-03-15 - 17:36 CristianVega  
Unknown file formateps PhiResolutionL1L1B.eps r1 manage 8.2 K 2013-03-04 - 20:22 CristianVega  
Unknown file formateps PtResolutionCurrentL1L1B.eps r1 manage 17.1 K 2013-03-12 - 00:29 CristianVega  
JPEGjpg PtResolutionL1L1B-SI3.jpg r1 manage 25.2 K 2013-03-12 - 00:29 CristianVega  
PNGpng PtResolutionL1L1B-SI4.png r1 manage 15.8 K 2013-03-15 - 17:36 CristianVega  
Unknown file formateps PtResolutionL1L1B.eps r1 manage 7.9 K 2013-03-04 - 20:22 CristianVega  
Texttxt PythonScripting.txt r1 manage 0.8 K 2013-06-10 - 21:24 CristianVega  
PNGpng egRelativeEMRgnIsolation.png r1 manage 17.4 K 2013-03-21 - 20:59 CristianVega  
PNGpng egRelativeJetIsolation.png r1 manage 17.3 K 2013-03-21 - 20:59 CristianVega  
PNGpng egRelativeRgnIsolation.png r1 manage 18.8 K 2013-03-21 - 20:59 CristianVega  
PNGpng emCluster.png r1 manage 15.0 K 2013-03-21 - 20:59 CristianVega  
Compressed Zip archivezip importantpapers.zip r1 manage 14435.8 K 2013-07-10 - 23:18 CristianVega  
PNGpng jetEMIsolation.png r1 manage 15.7 K 2013-03-21 - 20:59 CristianVega  
PNGpng jetIsolation.png r1 manage 16.3 K 2013-03-21 - 20:59 CristianVega  
Texttxt makeEfficiencyTree_cfg.py.txt r1 manage 20.9 K 2013-05-28 - 17:58 CristianVega  
Texttxt makeRateTrees_cfg.py.txt r1 manage 8.4 K 2013-06-17 - 17:06 CristianVega  
PNGpng rgnEMIsolation.png r1 manage 15.8 K 2013-03-21 - 20:59 CristianVega  
PNGpng rgnIsolation.png r1 manage 17.0 K 2013-03-21 - 20:59 CristianVega  
Edit | Attach | Watch | Print version | History: r41 < r40 < r39 < r38 < r37 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r41 - 2013-07-15 - CristianVega
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    Main All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback