TWiki> Main Web>DavidCockerillEdBoard (revision 35)EditAttachPDF

Public Ed Board items

ECAL Editorial Board - CMS page

Public Physics Results Agreed CMS publication statements Public Ecal DPG Results CMS photo book/brochures Pub Comm page
Procedures for CMS Scientific Publications Latex and svn area Language/author guidelines

Test beam note on hadron damaged xtals

svn EGM-11-001 area


  • A subdirector can redirect to another project if an incorrect assignment, ie EGM, instead of ECAL has been made.

ECAL Performance Statements

Use ONLY CMS Publications: "Inputs for the detector description paragraph of the CMS physics papers" for the currently approved ECAL performance statements.

No longer to be used, the following 18 Feb 2013, proposed statement:

No longer to be used, the following:
17 April 2012, to include in EXO-11-024 (W' => leptons), the following was agreed amongst the ECAL Ed board and others:

  • "The energy resolution for the very high transverse momentum electrons used in this analysis, which are predominantly in the central pseudorapidity region, is about 1%. In the forward region the resolution is about 2%."
  • Supporting plots: AN in preparation, 'Electron-based and Photon-based Energy Corrections with improved material dependence', Barfuss et al, Barrel - Fig. 29, Endcap - Fig. 30.

iCMS notes

  • Check "Status of All Waiting Notes" in the notes processing section
  • Check 'Project', it should be ECAL. Is sometimes TRISTU (Trigger) in which case CRs etc will NOT come to me as ECAL ed board chair
  • Check 'categories', should be ECAL
  • Ask Dirk Samyn for help if project/category is incorrect

Edits to ECAL res paper

Google editor - resolution paper

Note: questions flagged with strings of %%%

ECAL-paper-edits-laser-to-twiki-10Oct2012.tex: laser

Edits-inter-calibs-twiki-10Oct2012.tex: intercalibs

Plots and papers

Conference Talks



iCMS - Publications - subeditors

  • login to iCMS to be able to see subeditor fields
  • click on Publications, 'Notes Processing' panel appears on LHS.
  • click on 'for subeditors', will see Notes, IN, and CR, some under subeditor, some under acquired
  • In top set, highlight item of interest, click on Acquire
  • Once acquired, click on 'edit', to change abstract etc, request new draft, or approve

  • To see Detector Notes, go back to 'Notes Processing' and click on 'Detector Notes'
  • To see Analysis Notes, go back to 'Notes Processing' and click on 'Analysis Notes'

ECAL journal publications

Measurement of the bulk leakage current of silicon sensors of the CMS Preshower after an integrated luminosity of 6.17 fb-1 at √s = 7 TeV sent to JINST, 14.11.2012

CMS Reviews

MUO-11-001 The performance of the CMS muon detector in proton–proton collisions at sqrt(s) = 7 TeV at the LHC 9.5.2013
FWD-003-011 Study of the Underlying Event at Forward Rapidity in Proton-Proton Collisions at the LHC 22.1.2013, to JHEP 11.2.2013
BTV-12-001 Identification of b-quark jets with the CMS experiment 1.9.2012, to JINST, 19.11.2012, accepted 21.2.2013
TOP-11-021 Measurement of the single top quark t-channel cross section in pp collisions at sqrt(s) = 7 TeV sent to JHEP, proofs 26.11.2012
MUO-10-004 Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV sent to JINST 19.6.2012, proofs 2.10.2012
TOP-11-010 Search for Z' resonances decaying to top-antitop pairs in dilepton + jets final states pp collisions at sqrt(s) = 7 TeV sent to PRD, 14.11.2012
EWK-11-003 Measurement of the weak-mixing angle with the Drell-Yan process in proton-proton collisions at the LHC sent to PRD, 12.10.2011

At the CADI site, click on latest file version and immediately open with Adobe, rather than downloading the zip file. The save fromthe open pdf file.

Use of English

Figures show, depict, indicate, illustrate.

Section, Figure and Table are capitalized, as in "As discussed in Section 3". Figure can be abbreviated as Fig., but the others are not usually abbreviated, but that's a matter of taste - just be consistent.

Remember that "i.e." and "e.g." are always followed by a comma.

"respectively" is preceded by a comma, as in "The light bulbs lasted 10 and 100 days, respectively."

Therefore, however, hence and thus are usually followed by a comma, as in "Therefore, our idea should not be implemented."

Instead of "Reference [1] shows" or "[1] shows," use "Smith [1] showed" or "Smith and Jones [1] showed" or "Smith et al. [1] showed"

Numbers ten or less are spelled out: "It consists of three fields," not "3 fields".

Use until instead of the colloquial till.

Use. Eq. 7, not Equation (7), unless you need to fill empty pages.

Use consistent tense - present, usually, unless reporting results achieved in earlier papers.

Use hyphens for concatenated words: "end-to-end architecture," "real-time operating system" (but "the computer may analyze the results in real time"), "per-flow queueing," "flow-enabled," "back-to-back,"

None: None can take either singular or plural verbs, depending on the intended meaning (or taste). Both none of these mistakes are common and none of these mistakes is common are correct, although other sources only lists the singular and The Tongue untied makes finer distinctions based on whether it refers to a unit or a measure.

Expand all acronyms on first use, except acronyms that every reader is expected to know. (In a research paper on TCP, expanding TCP is probably not needed - somebody who doesn't know what TCP stands for isn't likely to appreciate the rest of the paper, either.)

No hypen for "in situ", as in "in situ calibration" unless it is a noun as in "the government in-situ"

In general, hyphens are used for

  • adding prefixes that would result in double vowels (except for co-, de-, pre-, pro-), e.g., supra-auditory;
  • all-: all-around, all-embracing;
  • half-: half-asleep, half-dollar (but halfhearted, halfway);
  • quasi-: quasi-public
  • self-: self-conscious, self-seeking (but selfhood, selfless)
  • to distinguish from a solid homograph, e.g., re-act vs. react, re-pose vs. repose, re-sign vs. resign, re-solve vs. resolve, re-lease vs. release
  • A compound adjective made up of an adjective and a noun in combination should usually be hyphenated. (WiT, p. 230) Examples: cold-storage vault, hot-air heating, short-term loan, real-time operating system, application-specific integrated circuit, Internet-based.
  • words ending in -like when the preceding word ends in 'l', e.g., shell-like

Which but not that

  • Where the relative pronoun refers to the whole of the previous clause, and not just to the noun that precedes it, that cannot be used.
  • In these instances, we have to use which:
  • The explorer Sir Ranulph Fiennes ran in seven marathons in five different continents recently which is amazing for a man of 59 who had a heart attack six months ago.
  • Here which replaces this in the following:
  • The explorer Sir Ranulph Fiennes ran in seven marathons in five different continents recently. This is amazing for a man of 59 who had a double heart bypass operation six months ago.

Which but not that in non-identifying relative clauses

  • which usually serve to provide additional, non-essential information and are separated by commas, which is the relative pronoun that is normally used. That would be unusual.
  • Compare the following pairs of identifying and non-identifying relative clauses:
  • Have you got any pieces for the guitar that are easy to play? <== no commas
  • I lent him The Rain in Spain and Japanese Folk Song, which are easy to play. <== comma
  • The last symphony (that) he composed was the ninth symphony. <== no commas
  • The ninth symphony, which was composed in the final year of his life, was not performed until after this death <== commas

Accuracy and precision

  • Accuracy - Accuracy is how close a measured value is to the actual (true) value.
  • Precision - Precision is how close the measured values are to each other.
  • So, if you are playing soccer and you always hit the left goal post instead of scoring, then you are not accurate, but you are precise!
  • Bias (don't let precision fool you!). If you measure something several times and all values are close, they may all be wrong if there is a "Bias". Bias is a systematic (built-in) error which makes all measurements wrong by a certain amount.

From Wikipaedia:

In the fields of science, engineering, industry and statistics,

  • the accuracy[1] of a measurement system is the degree of closeness of measurements of a quantity to that quantity's actual (true) value.
  • The precision[1] of a measurement system, also called reproducibility or repeatability, is the degree to which repeated measurements under unchanged conditions show the same results.
  • [2] Although the two words reproducibility and repeatability can be synonymous in colloquial use, they are deliberately contrasted in the context of the scientific method.

Integrated luminosity From Paolo Rumerio - this is the usual comment about avoiding writing "... XX fb-1 of pp collision data" in favor of "... data sample corresponding to an integrated luminosity of XX fb-1."

Benefits from

  • "The sensitivity to this decay mode greatly benefits
from the energy and position resolution and photon identification capabilities of the electromagnetic calorimeters at the LHC."
  • ========>
  • "The energy and position resolution, and photon identification capabilities of the electromagnetic
calorimeters greatly enhance the sensitivity to this decay mode at the LHC."

Affect and effect There are five distinct words here. When “affect” is accented on the final syllable (a-FECT), it is usually a verb meaning “have an influence on”: “The million-dollar donation from the industrialist did not affect my vote against the Clean Air Act.”

Occasionally a pretentious person is said to affect an artificial air of sophistication. Speaking with a borrowed French accent or ostentatiously wearing a large diamond ear stud might be an affectation. In this sort of context, “affect” means “to make a display of or deliberately cultivate.”

Another unusual meaning is indicated when the word is accented on the first syllable (AFF-ect), meaning “emotion.” In this case the word is used mostly by psychiatrists and social scientists—people who normally know how to spell it.

The real problem arises when people confuse the first spelling with the second: “effect.” This too can be two different words. The more common one is a noun: “When I left the stove on, the effect was that the house filled with smoke.” When you affect a situation, you have an effect on it.

Less common is a verb meaning “to create”: “I’m trying to effect a change in the way we purchase widgets.” No wonder people are confused. Note especially that the proper expression is not “take affect” but “take effect”—become effective. Hey, nobody ever said English was logical: just memorize it and get on with your life.

The stuff in your purse? Your personal effects.

The stuff in movies? Sound effects and special effects.

“Affective” is a technical term having to do with emotions; the vast majority of the time the spelling you want is “effective.”

-- DavidCockerill - 03-May-2012

Edit | Attach | Watch | Print version | History: r36 < r35 < r34 < r33 < r32 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r35 - 2013-12-05 - DavidCockerill
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    Main All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright &© 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback