our machine was studied and actually made at CERN in the 1980s. In 1996 PTR (a German company) installed an electron gun with 70 kV and 30 kW together with the corresponding equipment (high voltage generator, power supply, and CNC). The mechanical elements and the low-level electronics are bought from industry and where then installed in the machine (motors, encoders, mechanical positioning,...)

Below there are some references:

CNC

Synumeric 880N version 6

http://www.automation.siemens.com/doconweb/pdf/840C_1101_E/UNIV_SS.pdf?p=1

Guideways for linear motion for the main table

http://www.directindustry.fr/prod/schaeffler-kg-ina/patin-a-recirculation-de-rouleaux-169-54690.html

Motor for the main table: SIEMENS 3-phase Servomotor

Type : 1 FT5 074

http://www.automation.siemens.com/doconweb/pdf/SINUMERIK_SIMODRIVE_04_2009_E/1FT506_BE.pdf?p=1

Encoder

HEIDENHAIM ROD 420 RDD426

http://www.atechauthority.com/products.asp?id=173

-- FrankGerigk - 2009-09-16


This topic: SPL > WebHome > Linac4Web > CollaborationMeetings > ISTCcollaborationMeetings > July09CCDTL > CernEBW
Topic revision: r1 - 2009-09-16 - unknown
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright