Linac4 Documentation

goto SPL Documentation

2012

• Conference papers
  • LINAC4 low energy beam measurements, LM. Hein, B. Bellodi, JB. Lallement, AM. Lombardi, O. Midttun, P. Posocco, R. Scrivens, CERN-ATS-2012-206, IPAC 2012 New Orleans, USA.
  • Tuning procedure for the Linac4 PI Mode Structure (PIMS), P. Ugena Tirado, R. Wegner, CERN-ATS-2012-121, IPAC 2012, New Orleans, USA.
  • Status of the 160 MeV H- Injection into the CERN PSB, W. Weterings, B. Balhan, E. Benedetto, J. Borburgh, C. Bracco, C. Carli, B. Goddard, K. Hanke, B. Mikulec, A. Newborough, R. Noulibos, J. Tan, CERN-ATS-2012-212

• Notes
  • Study of injection of 50 MeV proton beam from Linac2 and from Linac4 into the PS Booster, V. Raginel, B. Mikulec, C. Carli, E. Benedetto, CERN-ATS-Note-2012-047 PERF.
  • On the possibility of accelerating protons to 50 MeV in LINAC4 and delivering them to the PSB, A. Lombardi, M. Vretenar, sLHC-Project-Note-0039.
  • Vacuum simulation of the LINAC4 H- source, C. Pasquino, P. Chiggiato, J. Lettry, CERN-ATS-Note-2012-043 TECH.
  • Magnetic measurements of a CEA/IPHI 28.5° dipole for the Linac4 diagnostic beam line, M. Buzio, D. Cote, R. Chritin, P. Galbraith, D. Giloteaux, CERN-ATS-Note-2012-035 TECH.
  • Generating a Multiparticle Beam and Computing Emittance from Measurement Data at the Linac4 Test Stand, V. Dimov, CERN-ATS-Note-2012-038 TECH.
  • Power Coupler Simulations for the Linac4 Drift Tube Linac, G. De Michele, F. Grespan, S. Ramberger, CERN-ATS-Note-2012-002 TECH.
  • The Linac4 DTL Prototype: Low and High Power Measurements, G. De Michele, JM. Giguet, J. Marques-Balula, S. Ramberger, CERN-ATS-Note-2012-003 TECH.

2011

• Journal papers
  • Influence of higher order modes on the beam stability in the high power superconducting proton linac, M. Schuh, F. Gerigk, J. Tuckmantel, C. Welsch, Phys. Rev. ST Accel. Beams 14, 051001 (2011).
• Reports
  • Progress Report on SIMULINK Modelling of RF Cavity Control for SPL, Extension to LINAC4 Theory and Analysis behind Simulation Results of SPL Model Using I/Q Components in SIMULINK to Date, Including Lorentz Force Effects and Multiple Cavities Driven by Single Feedback Loop, M. Hernandez, W. Höfle, CERN-sLHC-PROJECT-Report-0054.
• Conference papers
  • Design, Manufacture and Measurements of Permanent Quadrupole Magnets for Linac4, D. Tommasini, M. Buzio, P. Thonet, A. Vorzhtsov, 22nd International Conference on Magnet Technology, Marseille, 2011.
  • Manufacturing the Linac4 PI-mode Structure Prototype at CERN, G. Favre et al, IPAC11, San Sebastian, Spain.
  • Status of the New Linac4 Magnets at CERN, T. Zickler et al, IPAC11, San Sebastian, Spain.
  • Design of a Beam Dump for 3 to 100 MeV for the New H- Beam in the CERN Linac4, C. Maglioni, IPAC11, San Sebastian, Spain.
  • Practical Test of the Linac4 RF Power System, N. Schwerg, O. Brunner, IPAC11, San Sebastian, Spain.
  • The LINAC4 project at CERN, M. Vretenar et al, IPAC11, San Sebastian, Spain.
  • The LINAC4 power coupler, F. Gerigk, JM. Giguet, E. Montesinos, B. Riffaud, P. Ugena Tirado, R. Wegner, IPAC11, San Sebastian, Spain.
  • High power test for the first PIMS cavity for LINAC4, F. Gerigk, JM. Giguet, P. Ugena Tirado, R. Wegner, IPAC11, San Sebastian, Spain.
  • Medium Power 352 MHZ solid state pulsed RF amplifiers for the CERN LINAC4 Project, J. Broere, J. Marques Balula, Y. Gomez Martinez, M. Rossi, IPAC11, San Sebastian, Spain.
  • A fast chopper driver, M. Paoluzzi, IPAC 11, San Sebastian, Spain.
• Notes
  • Measurements with the Steerer Dipole LBE.DHZ/DVT10: Bending Capability and Extrapolation to Linac4 Operation, T. Hermanns, CERN-ATS-Note-2011-020.
  • Update of the Linac4-PSB Transfer Line, L. Hein, A. M. Lombardi, CERN-sLHC-Project-Note-0028.
  • On the Feasibility of Accelerating Deuterons in Linac4, J. Stovall, J.B. Lallement, M. Garcia Tudela, S. Ramberger, K. Crandall, CERN-sLHC-Project-Note-0032.
  • Alignment and Field Error Tolerance in Linac4, G. Bellodi, M. Eshraqi, M. Garcia Tudela, L. Hein, J.B. Lallement, S. Lanzone, A.M. Lombardi, P. Posocco, E. Sargsyan, CERN-ATS-Note-2011-021.
  • Power Overhead in the LINAC-4 Debuncher Cavity, J. Tückmantel, CERN-sLHC-Project-Note-0033.

2010

• Reports
  • Measurement of the Energy Distribution of the CERN Linac4 160 MeV H-Beam Close to the PS Booster Injection, K. Hanke, T. Hermanns, CERN-sLHC-Project-Report-0033.
• Conference Papers
  • Status of Linac4 construction at CERN, M. Vretenar, CERN-ATS-2010-227, LINAC 2010, Tsukuba, Japan.
  • Progress in the fabrication of the RFQ accelerator for the CERN Linac4, C. Rossi, P. Bourquin, J.B. Lallement, A.M. Lombardi, S. Mathot, D. Pugnat, M. Timmins, G. Vandoni, M. Vretenar, M. Desmons, A. France, Y. Le Noa, G. Novo, O. Piquet, CERN-ATS-2010-224, LINAC 2010, Tsukuba, Japan.
  • Wire grid and wire scanner design for the CERN Linac4 F. Roncarolo, E. Bravin, B. Cheymol, C. Dutriat, M. Duraffourg, J.G. Focker, U. Raich, C. Vuitton, CERN-ATS-2010-223, LINAC 2010, Tsukuba, Japan.
  • Overview of the CERN Linac4 beam instrumentation, F. Roncarolo, G. Bellodi, E. Bravin, B. Dehning, M. Duraffourg, D. Gerard, E.B. Holzer, F. Lenardon, G. Focker, U. Raich, L. Soby, M. Sordet, J. Tan, B. Tranquille, C. Vuitton, C. Zamantzas, B. Cheymol, LINAC 2010, Tsukuba, Japan.
  • Accuracy determination of the CERN Linac4 emittance measurements at the test bench for 3 and 12 MeV, F. Roncarolo, B. Cheymol, E. Bravin, U. Raich, CERN-ATS-2010-221, LINAC 2010, Tsukuba, Japan.
  • Production design of the drift tube Linac for the CERN Linac4, S. Ramberger, P. Bourquin, Y. Cuvet, A. Dallocchio, G. De Michele, F. Gerigk, J.M. Giguet, J.B. Lallement, A.M. Lombardi, E. Sargsyan, M. Vretenar, CERN-ATS-2010-215, LINAC 2010, Tsukuba, Japan.
  • Diagnostic Lines for the 160 MeV H Linac4 at CERN, B. Mikulec, G. Bellodi, K. Hanke, T. Hermanns, M. Eshraqi, CERN-ATS-2010-214, LINAC 2010, Tsukuba, Japan.
  • The hot prototype of the Pi-mode structure for LINAC4, F. Gerigk, R. Wegner, P. Bourquin, A. Dallocchio, G. Favre, J.M. Geisser, L. Gentini, J.M. Giguet, S. Mathot, M. Polini, D. Pugnat, B. Riffaud, S. Sgobba, T. Tardy, P. Ugena Tirado, M. Vretenar, CERN-ATS-2010-207, LINAC 2010, Tsukuba, Japan.
  • Beams dynamics optimisation of LINAC4 structures for increased operational flexibility, G. Bellodi, M. Eshraqi, M. Garcia Tudela, L.M. Hein, J.B. Lallement, A.M. Lombardi, P.A. Posocco, E. Sargsyan, J. Stovall, CERN-ATS-2010-202, LINAC 2010, Tsukuba, Japan.
  • A Measurement System for Fast-Pulsed Magnets: A Case Study on Linac4 at CERN, P. Arpaia, M. Buzio, O. Dunkel, D. Giloteaux, G. Gollucio, sLHC-PROJECT-Report-0048, 2010 IEEE Instrumentation & Measurement Technology Conference (I2TMC), 3-6 May 2010, Austin, USA.
  • Eddy Current Modeling and Measuring in Fast-Pulsed Resistive Magnets, P. Arpaia, M. Buzio, G. Gollucio, G. Montenero, sLHC-PROJECT-Report-0047, 2010 IEEE Instrumentation & Measurement Technology Conference (I2TMC), 3-6 May 2010, Austin, USA.
  • Magnetic Measurements of Permanent and Fast-Pulsed Quadrupoles for the CERN LINAC4 Project, Golluccio, G ; Arpaia, P ; Buzio, M ; Dunkel, O ; Giloteaux, D ; Lombardi, A ; Mateo, F ; Ramberger, S, IPAC 2010, CERN-sLHC-Project-Report-0041
• Technical Notes
  • Synchronization between Linac4 and the PS Booster, M.E. Angoletta, A. Blas, A. Butterworth, C. Carli, M. Chanel, A. Findlay, I. Kozsar, B. Mikulec, J. Molendijk, M. Paoluzzi, F. Pedersen, J. Sanchez, CERN-ATS-Note-2010-052.
  • Updated end-to-end simulations of Linac4, M. Garcia Tudela, G. Bellodi, M. Eshraqi, L.M. Hein, J.B. Lallement, A.M. Lombardi, P.A. Posocco, E. Sargsyan, CERN-sLHC-Project-Note-0025.
  • CCDTL Power Splitting, P. Posocco, M. Garcia Tudela, A. Lombardi, CERN-sLHC-Project-Note-0024.
  • X-ray measurements on the Linac4 DTL prototype cavity, M. Widorski, CERN-SC-2010-033-RP-SN (restricted access).
  • A fast 650V Chopper Driver, M. Paoluzzi, sLHC-Project-Note-0022.
  • Studies for the H₀/H^- dump for Linac4: energy deposition, induced radioactivity and BLM signal, Versaci, R (EN-STI), Mereghetti, A (EN-STI) ; Silari, M (EN-STI) ; Chamizo, R (EN-STI), CERN-sLHC-Project-Note-0021.
  • Operational Principle and Tuning of the MegaDiscaP Power Converters Control System, J.M. Cravero, N. Wassinger, R. Garcia Retegui, M. Benedetti, S. Maestri, W. Kloster, CERN-sLHC-Project-Note-0020
  • Linac4 chopper line commissioning strategy, G. Bellodi, J.B. Lallement, A.M. Lombardi, P.A. Posocco, E. Sargsyan, CERN-sLHC-PROJECT-Report-0037.
  • A Pencil Beam for the Linac4 commissioning, J.B. Lallement, A. Lombardi, CERN-sLHC-Project-Note-0017.
  • Chopper Line Studies, M. Garcia Tudela, J.B. Lallement, A. Lombardi, CERN-sLHC-Project-Note-0012.
  • A Program to Generate a Particle Distribution from Emittance Measurements, DS Bouma, J. Stovall, JB Lallement, CERN-sLHC-Project-Note-0008.
  • Beam loss control in the LINAC4 design, J. Stovall, JB Lallement, K. Crandall, CERN-sLHC-Project-Note-0009.

2009

• Journal Papers
  • PIMS–A simple and robust accelerating structure for high intensity proton Linacs, R. Wegner, F. Gerigk, Nucl. Instr. Meth. A, 606, I3, p. 257-270, 21 July 2009
• Conference Papers
  • Design of the Pi-Mode Structure (PIMS) for Linac4, F. Gerigk, R. Wegner, PAC'09, sLHC-Project Report 0026
• Technical Notes
  • Pi-Mode Structure (PIMS) cooling channels design for the LINAC4, R. De Morais Amaral, EDMS 982590
  • Analysis of the cooling channels for the low duty cycle PIMS, R. De Morais Amaral, EDMS 989032/1

2008

• Conference Papers
  • Drift tube linac design and prototyping for the CERN Linac4, S. Ramberger, N. Alharbi, P. Bourquin, Y. Cuvet, F. Gerigk, A.M. Lombardi, A. Pisent, E.Zh. Sargsyan, M. Vretenar, LINAC'08, Victoria.
  • Development status of the pi-mode accelerating structure (PIMS) for Linac4, P. Bourquin, R. De Morais Amaral, G. Favre, J-M. Lacroix, T. Tardy, M. Vretenar, R. Wegner, LINAC'08, Victoria.
• Technical Notes
  • Projet Linac4, P. Bourquin, TS-Note-2008-004
  • Design and manufacturing of a DTL prototype power coupler, S. Ramberger, P.-E. Bernaudin, J.-M. De Conto, D. Marchand, E. Vernay, M. Vretenar, CARE-Report-08-009-HIPPI
  • Updated layout of the LINAC4 transfer line to the PS Booster, G Bellodi, M Eshraqi, JB Lallement, AM Lombardi, CERN-AB-Note-2008-036
  • CERN chopper final report, M. Paoluzzi, F. Caspers, T. Kroyer, CERN-AB-Note-2008-040, CARE-Report-2008-020-HIPPI

2007

• Journal Papers
  • Physics potential of the CERN-MEMPHYS neutrino oscillation project, J.E. Campagne, M. Maltoni, M. Mezzetto, T. Schwetz, J. High Energy Phys. 04 (2007) 003
• Conference Papers
  • Radiation protection studies for the front-end of the 3.5 GeV SPL at CERN, M. Magistris, E. Mauro, M. Silari, ACCAPP'07, Pocatello, USA, July 30 - August 2, 2007
  • A RF driven H- source for Linac4, CERN-AB-2007-073, D. Küchler, T. Meinschad, J. Peters, R. Scrivens, 12th International Conference on Ion Sources, Jeju, Korea, 26-31 August, 2007
  • 160 MeV H- Injection into the CERN PSB, CERN-AB-2007-043, W. Weterings, G. Bellodi, J. Borburgh, T. Fowler, F. Gerigk, B. Goddard, K. Hanke, M. Martini, L. Sermeus, 22nd PAC Conference PAC07, Albuquerque, USA, June 25-29, 2007
  • Simulation of the CERN PS booster performance with 160 MeV H- injection from Linac4, CERN-AB-2007-053, M. Aiba, C. Carli, S. Cousineau, F. Gerigk, M. Martini, 22nd PAC Conference PAC07, Albuquerque, USA, June 25-29, 2007
  • RF structures for Linac4, CERN-AB-2007-050, F. Gerigk, N. Alharbi, M. Pasini, S. Ramberger, M. Vretenar, R. Wegner, 22nd PAC Conference PAC07, Albuquerque, USA, June 25-29, 2007
  • Linear accelerator designs for the upgrade of the CERN Proton Injector Complex (Linac4, SPL), CARE-Conf-2007-002-HIPPI, M. Vretenar, G. Bellodi, R. Garoby, F. Gerigk, K. Hanke, A. M. Lombardi, S. Maury, M. Pasini, C. Rossi, E.Z. Sargsyan, APAC'07, Indore (India), 26 January-02 February 2007
  • High power RF testing of a Cell Coupled Drift Tube Linac prototype for Linac4, CARE-Conf-2007-001-HIPPI, M. Vretenar, Y. Cuvet, F. Gerigk, J. Marques Balula, M. Pasini, APAC'07, Indore (India), 26 January-02 February 2007
• Reports
  • CCDTL prototypes: test results, CARE-Report-2007-036-HIPPI, M. Pasini, M. Vretenar, R. Wegner
  • The CERN SPL Chopper Structure. A Status Report, CERN-AB-2007-004, CARE-Report-06-033-HIPPI, T. Kroyer, F. Caspers, E. Mahner
• Technical Notes
  • Radiation protection considerations for the installation of Linac4 in the existing Linac2 building, CERN-SC-2007-031-RP-TN (EDMS: 841455), M. Magistris, E. Mauro, M. Silari
  • Design of an RFQ Accelerator optimised for Linac4 and SPL, CERN-AB-2007-027- RF, A.M. Lombardi, C. Rossi, M. Vretenar
  • Loss Control and Steering Strategy for the CERN LINAC4, AB-Note-2007-033 ABP, A.M. Lombardi, J.B. Lallement, E. Sargsyan, S. Lanzone, G. Bellodi, M. Eshraqi, B. Hadorn
  • Transfer Line Studies from LINAC4 to the PS Booster: “South Hall” Option, AB-Note-2007-004 ABP, G. Bellodi, A. M. Lombardi
  • Transfer Line Studies from LINAC4 to the PS Booster: Green Field Option, CERN-AB-Note-2007-037, G. Bellodi, A. Lombardi
  • Comparative study of the beam dynamics in LINAC4 using CERN and RAL MEBT (Medium Energy Beam Transport) lines, CARE-Note-2007-010-HIPPI, C. Plostinar, E. Sargsyan
  • Pi-mode 352 MHz scaled LEP cavities as an alternative accelerating structure for the energy range of 90 to 160 MeV in CERN Linac4/SPL, CARE-Note-2007-003-HIPPI, E. Sargsyan, A. Lombardi

2006

• Design Report
  • Linac4 Technical Design Report, CERN-AB-2006-084 ABP/RF, L. Arnaudon, P. Baudrenghien, M. Baylac, G. Bellodi, Y. Body, J. Borburgh, P. Bourquin, J. Broere, O. Brunner, L. Bruno, C. Carli, F. Caspers, S. Cousineau, Y. Cuvet, C. De Almeida Martins, T. Dobers, T. Fowler, R. Garoby, F. Gerigk, B. Goddard, K. Hanke, M. Hori, M. Jones, K. Kahle, W. Kalbreier, T. Kroyer, D. Küchler, A.M. Lombardi, L.A. Lopez-Hernandez, M. Magistris, E. Mahner, M. Martini, S. Maury, T.K. Meinschad, E. Page, M. Paoluzzi, M. Pasini, U. Raich, C. Rossi, J.-P. Royer, E. Sargsyan, J. Serrano, R. Scrivens, M. Silari, M. Timmins, W. Venturini Delsolaro, M. Vretenar, R. Wegner, W. Weterings, T. Zickler
• Conference Papers
  • End-to-End beam dynamics for CERN LINAC4, CERN-AB-2007-001, A.M. Lombardi, E. Z. Sargsyan, S. Lanzone, J.-B. Lallement, G. Bellodi, M. Baylac, R. Duperrier, D. Uriot, 39th ICFA Advanced Beam Dynamics Workshop on High Intensity High Brightness Hadron Beams HB2006, Tsukuba, Japan, May 29 – June 2, 2006
  • Measurement Strategy for the CERN Linac4 Chopper-Line, CARE Conf-06-038-HIPPI, JB. Lallement, A. Lombardi, E. Sargsyan, M. Hori, K. Hanke, ICFA HB2006, KEK, Japan
  • Linac4, a new injector for the CERN PS booster, CERN-AB-2006-027, R. Garoby, F. Gerigk, K. Hanke, A.M. Lombardi, M. Pasini, C. Rossi, E. Sargsyan, M. Vretenar, Proc. of the European Particle Accelerator Conference EPAC'06 Edinburgh, UK, 26-30 June 2006
  • Towards an H- RF Source for Future CERN Accelerator Projects, CERN-AB-2007-003, D. Küchler, Th. Meinschad, J. Peters, R. Scrivens, 11th International Symposium on the Production and Neutralization of Negative Ions and Beams PNNIB 11 , Santa Fe, NM, USA , 13 - 15 Sep 2006
  • Design and Development of RF Structures for Linac4, CERN-AB-2006-082, M. Vretenar, N. Alharbi, F. Gerigk, M. Pasini, R. Wegner, 2006 Linear Accelerator Conference LINAC'06, Knoxville, TN, USA, 21-25 August 2006
• Technical Notes
  • Complementary shielding calculations for Linac4 in the South Hall, CERN-SC-2006-060-RP-TN (EDMS: 805686), M. Magistris, E. Mauro, M. Silari
  • A Comparison of pi/2-mode standing wave structures for Linac4, AB-Note-2006-049 RF, R. Wegner, F. Gerigk
  • Alternative Options for the LINAC4 Transfer Line, AB-Note-2006-44 ABP, M. Eshraqi, A. Lombardi
  • CCDTL design update for Linac4, CARE-NOTE-2005-014-HIPPI, M. Pasini
  • Design of a Side-Coupled Linear Accelerator Structure for Linac4, CERN-AB-Note-2005-044-RF, CARE-Note-2005-015-HIPPI, E. Benedico Mora, M. Vretenar
  • Design of the 2 MHz, 100 kW Amplifier for the 3 MeV, H- source, AB-Note-2006-041, M. Paoluzzi
  • End-to-End simulations of LINAC4, AB-Note-2006-033 ABP, S. Lanzone, J.B. Lallement, A. Lombardi, E. Sargsyan
  • Statistical simulations of machine errors for LINAC4, physics/0607025, LPSC-2006-45, M. Baylac, JM. De Conto, E. Froidefond, E. Sargsyan
  • Superconducting spoke LINAC design as an alternative option for the CERN LINAC4 high energy part, AB-Note-2006-019 ABP, E. Sargsyan, A. Lombardi
  • Visit to FDI Technology, Saint Petersburg 4-6th December 2006 Travel Report, AB-Note-2006-048 RF, M. Paoluzzi
  • Field Stabilization with Post Couplers for DTL tank1 of Linac4, CARE-Note-2006-012-HIPPI, N. Alharbi, F. Gerigk, M. Vretenar, CERN, Geneva, Switzerland
  • A 90 – 160/180 MeV SPOKE LINAC as an option for the CERN LINAC4/SPL, CARE-Note-2006-008-HIPPI, Jean-Luc Biarrotte, Guillaume Olry, CNRS / IPN Orsay, 12 June 2006
  • A Comparison of π/2-mode standing wave structures for Linac4, CARE-Note-2006-020-HIPPI, R. Wegner, F. Gerigk, CERN, Geneva, Switzerland

2005

• Journal Papers
  • SPL and Beta Beams to the Frejus, M. Mezzetto, Nucl. Phys. B, Proc. Suppl. 149 (2005) 179-81
  • H- source developments at CERN, C. E. Hill, D. Küchler, C. Mastrostefano, M. O'Neill, R. Scrivens, T. Steiner, Rev. Sci. Instrum. 77 (2006) 03A521, 11th International Conference on Ion Sources, Caen, France, 12 - 16 Sep 2005
• Conference Papers
  • Progress in the design of Linac4, the SPL Normal-Conducting Front-End (<180 MeV), CERN-AB-2005-055, F. Gerigk, R. Garoby, K. Hanke, A.M. Lombardi, M. Pasini, C. Rossi, E. Sargsyan, T. Siever, M. Vretenar, 34th ICFA Advanced Beam Dynamics Workshop on High Power Superconducting Ion, Proton, and Multi-Species Linacs, HPSL05, Naperville, USA (2005)
  • H- Source Developments at CERN, CERN-AB-2005-002, C. Hill, D. Küchler, R. Scrivens, T. Steiner, AIP Conf. Proc. 763 April 2005, 10th International Symposium on Production and Neutralization of Negative Ions and Beams, Kiev, Ukraine, 14 - 17 Sep 2004
• Technical Notes
  • Preliminary shielding design of Linac 4. Top shielding and induced radioactivity, CERN-SC-2005-050-RP-TNCERN-SC-2005-050-RP-TN, M. Magistris and M. Silari
  • Preliminary shielding design of Linac 4, CERN-SC-2005-011-RP-TN CERN-SC-2005-011-RP-TN, M. Magistris and M. Silari,
  • Annual Effective Dose in Offices Near the Proposed Linac4, CERN-SC-2005-133-RP-TN, Th. Otto
  • Beam dynamics in the LINAC4/SPL CCDTL, AB-Note-2005-032 ABP, E. Sargsyan, A. Lombardi
  • Design and Construction of a Beam Shape and Halo Monitor for the CERN SPL, AB-Note-2005-033 OP, CARE/HIPPI-Document-2005-005, K.Hanke, M.Hori
  • The LINAC4/SPL DTL sensitivity to the input longitudinal emittance, AB-Note-2005-038 ABP, E. Sargsyan, A. Lombardi

2004

• Conference Papers
  • Beam Dynamics for a New 160 MeV H- Linac at CERN (LINAC4), CERN-AB-2004-101 RF, CARE-Conf-04-014-HIPPI, E. Benedico Mora, F. Gerigk, A. Lombardi, E. Sargsyan, M. Vretenar, Proc. of the XXII International Linear Accelerator Conference LINAC'04, Lübeck, Germany,16-20 August, 2004
  • Design of LINAC4, a New Injector for the CERN Booster, CERN-AB-2004-104 RF, CARE-Conf-04-015-HIPPI, R. Garoby, F. Gerigk, K. Hanke, A. Lombardi, C. Rossi, M. Vretenar, Proc. of the XXII International Linear Accelerator Conference LINAC'04, Lübeck, Germany,16-20 August, 2004
  • Development of a 352 MHz Cell-Coupled Drift Tube Linac Prototype, CERN-AB-2004-103 RF, CARE-Conf-04-017-HIPPI, Y. Cuvet, J. Genest, F. Gerigk, C. Völlinger, M. Vretenar, Proc. of the XXII International Linear Accelerator Conference LINAC'04, Lübeck, Germany,16-20 August, 2004
  • Review of Fast Beam Chopping, CERN-AB-2004-096 RF, F. Caspers, Proc. of the XXII International Linear Accelerator Conference LINAC'04), Lübeck, Germany, 16-20 August, 2004
  • The SPL Front End: A 3 MeV H- Test Stand at CERN, CERN-AB-2004-102 RF, CARE-Conf-04-016-HIPPI, P. Ausset, P-Y. Beauvais, L. Bruno, F. Caspers, R. Garoby, J. Genest, K. Hanke, M. Hori, D. Küchler, A. Lombardi, M. Magistris, A. Millich, M. Paoluzzi, C. Rossi, E. Sargsyan, M. Silari, T. Steiner, M. Vretenar, Proc. of the XXII International Linear Accelerator Conference LINAC'04 , Lübeck, Germany,16-20 August, 2004
  • LINAC4, A New H- Linear Injector at CERN, CERN-AB-2005-012, R. Garoby, K. Hanke, A. Lombardi, C. Rossi, M. Vretenar, F. Gerigk, Proc. of the XIX Russian Particle Accelerator Conference, Dubna, Russia, 4-9 October 2004
  • Benchmarking Linac codes for the HIPPI project, A. Franchi, R. Duperrier, G. Franchetti, F. Gerigk, L. Groening, I. Hofmann, A. Orzhekhovskaya, A. Sauer, D. Uriot, S. Yaramishev, 33d Advanced Beam Dynamics Workshop on High Intensity High Brightness Hadron Beams, HB2004, Bensheim, Germany, October 18-23, 2004
  • High-intensity proton beams at CERN and the SPL study, CERN-AB-2004-021-ABP, E. Metral et al., 3rd Asia Particle Accelerator Conference, Gyeongju, Korea, 22 - 26 Mar 2004, pp.539

2003

• Journal Papers
  • Physics Potential of the SPL Super Beam, M. Mezzetto, J. Phys. G 29 (2003) 1781-1784
• Conference Papers
  • Halo studies for the ESS and Linac4 front-ends, EXT-2003-051, F. Gerigk, 29th ICFA Advanced Beam Dynamics Workshop on Beam-Halo Dynamics, Diagnostics and Collimation, HALO '03, Montauk, USA (2003)
  • All Digital IQ Servo-System for CERN Linacs, CERN-AB-2003-046 RF, R. Garoby, A. Rohlev, J. Serrano, Proc. of the PAC 2003 Conf., Portland, Oregon, USA, 12 - 16 May 2003
• Technical Notes
  • Simulations of the Beam Diagnostics Line for the SPL 3MeV Chopper Line, AB-Note-2004-053 ABP, E. Sargsyan, K. Hanke, A. Lombardi
  • Study of the 3 MeV Chopper Line for the SPL, AB-Note-2003-038 ABP, A. Lombardi, E. Sargsyan, O. Arakava

2002

• Technical Notes
  • Comparison of three Buncher Structure Designs for the 3 MeV SPL Chopping Line, PS/RF/ Note 2002-028, A. Millich, M. Vretenar
  • Design and Performance of a 500 V Pulse Amplifier for the Chopper of the CERN Superconducting H- Linac (SPL), CERN/PS 2002-026 (RF), M. Paoluzzi
  • Design Choices for the SPL normal-conducting Front End (3 - 120 MeV), PS/RF Note 2002-038, CERN-NUFACT-NOTE NF 110, F. Gerigk, M. Vretenar
  • Design of a 120 MeV H- Linac for CERN High-Intensity Applications, CERN/PS 2002-069 (RF), F. Gerigk, M. Vretenar
  • Design of a Chopper Line for the CERN SPL, CERN/PS/2002-056 (RF), F. Caspers, K. Hanke, A. Lombardi, A. Millich, A. Mostacci, M. Paoluzzi, M. Vretenar
  • Fast Chopper Structure for the CERN Superconducting Proton Linac, CERN-PS-2002-027-RF, F. Caspers, S. Kurennoy, A. Mostacci
  • Justification for the Replacement of Linac2 by a 120 MeV H- Linac, PS/RF/ Note 2002-062, R. Garoby
  • Thermal Analysis of a Metallic Foil under a Proton Beam Load for the SPL Chopper, PS/BD/Note 2002-132 (Tech.), E. Bravin

2001

• Conference papers
  • SPLinac : Computer Simulations of SC Linac RF Systems with Beam, CERN-SL-2001-056-HRF, J. Tuckmantel
• Technical Notes
  • Simulation of the SPL SC RF system with Beam using "SPLinac" . - 2nd ed. , SL-Note-2000-054-HRF, J. Tuckmantel
  • Neutrino Oscillations at the SPL SuperBeam, M. Mezzetto, CERN-NUFACT-NOTE-60
  • Cost Optimisation Study for the SPL, CERN-PS-2001-071-DR, S. Schriber

2000

• Conference Papers
  • A High-Intensity H- LINAC at CERN Based on LEP-2 Cavities, CERN-PS-2000-059-RF, M. Vretenar, 20th International Linear Accelerator Conference, Monterey, CA, USA, 21 - 25 Aug 2000
  • Proton Drivers for Neutrino Factories : The CERN Approach, CERN-PS-2000-065-PP, H. Schonauer et al., International Workshop on Muon Storage Ring for a Neutrino Factory NuFact 2000 , Monterey, CA, USA , 22 - 26 May 2000
• Technical Notes
  • "SPLinac", A Program to Simulate SC Linac RF Systems with Beam, SL-Note-2000-053-HRF, J. Tuckmantel
  • Bunch stretching in the transfer line between SPL and accumulator and optimization against initial energy and phase jitter, CERN-PS-RF-NOTE-2000-021, F. Gerigk
  • A Second Generation Radioactive Nuclear Beam Facility at CERN, CERN-PS-2000-075-OP, J. Äystö, D. Forkel-Wirth, M. Lindroos, H. Ravn, P. Van Duppen

-- FrankGerigk - 16 Aug 2007