F. Gerigk, R. Wegner , G. DeMichele

DTL

• Prototype high power test
  • Prototype with magnets in the first DT and in the LE end-cone conditioned at 3% d.c. (width=1.5msec; repetition rate=20Hz)
  • Removed magnet in the LE end-cone for the installation of the anodizing matrix: at the moment the prototype is under vacuum

CCDTL

• the designed support, integrated in KATIA files, shows interferences of the structure in the survey area: modifications to be applied
• visit to Russia planned on 15-17th June

PIMS

• Welding on the prototype finished
• Prototype high power test
  • the test will be done in the 3MeV test stand area: concrete wall for x-rays shielding (discussion with RP group: T. Otto, M. Widorski)
  • alignment and shrinking measurements after welding ongoing

Debuncher cavity

• +/- 80 degrees phase shift in 40usec period is possible by changing the loaded Q (QL=6000, Pcav=25kW)

-- GiovanniDeMichele - 07-Jun-2010