F. Gerigk, S. Ramberger, M. Schuh, M. Jarosz, J. Borkowski, G. DeMichele

DTL

  • After the vacuum test (1.2*10-6 mBar ) it is ready for bead pull measurements in bld 169. The Bead-Pulling system is installed in place.
  • To allows tilt sensitivity measurements the Cu end-cones will be machined with holes to allow bead-pull measurements. At the moment the prototype has Al end-cones.
  • The prototype should be ready for HP test in the middle of September.

Bead-Pulling Program

  • Works now on slow PC
  • Ready to be tested on the prototype. A comparison between the old code and the new one with continuous data-point acquisition will be done.

Power Splitter - Magic T

  • The role of the posts and rod in the structure has been studied.
  • The dimensions and/or the position of the two posts will be changed to get an asymmetric power splitter.
  • Another solution could be the introduction of a short circuit on the port 4 in order to take advantage of the fact that the energy flow out of ports 2 and 3 is out of phase.
  • Peak fields in the structure should be checked.

HOM

  • First results on chopped beam effects. Plot.

-- MarcelSchuh - 14 Aug 2009

Topic attachments
I Attachment History Action Size Date Who Comment
PDFpdf HOM_transverse_chopping.pdf r1 manage 57.2 K 2009-08-14 - 16:05 MarcelSchuh Plot: Emittance growth vs. Qex for different beam chopping
Edit | Attach | Watch | Print version | History: r1 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r1 - 2009-08-14 - MarcelSchuh
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    SPL All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright