F. Gerigk, S. Ramberger, M. Schuh, P. Tirado

CCDTL

  • Technical meeting was a success. All open issues were discussed
  • Shipping list is under preparation
  • Simulations:
    • 2 modes fund in 3 cell model with 2 coupling cells and one cell in short circuit. Further studies ongoing to understand model

PIMS

  • Construction is ongoing
  • Investigation is in progress, if EB welding could be done in Juelich

Buncher Cavity

  • Feedback from Poland:
    • Line inside cavity detected. It should not be an problem in later operation so no additional machining will be done.

DTL

  • High Power Test is done at the moment *In first tests 3.5 MeV/m with more than L4 duty cycle (4Hz) was reached, which is not completely confirmed yet
  • Tilde sensitivity measurement is still under further analysis
  • First drift tube with magnet inside is ready for final welding.
    • Magnetic shielding is necessary
    • Drift tube will be cut open afterwards and final checks will be done
    • First “final” drift tube will be produced afterwards

HOM

  • Analyzing longitudinal simulation results in case of a chopped beam. Effect of chopping seems to be an issue, especially if HOM hits a machine line generated by the chopping. Further analysis is needed to identify damping limits.

-- MarcelSchuh - 02-Nov-2009

Edit | Attach | Watch | Print version | History: r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 2009-11-02 - MarcelSchuh
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    SPL All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright