Equipment codes:

• cold model: ACPMA
• hot model: ACPMB
• tooling: ACPMT

Technical Information on the PIMS:

• construction experience of PIMS cavities
• collaboration with HITEC (restricted)
• pictures of PIMS cold model
• References to similar work
• tuning and tuner penetration

CERN Prototype

• Preliminary construction sequence for prototype (restricted access), EDMS 1025977
• Metallurgical analysis of EB welds, EDMS 1032748, Orbital welding test, 7.10.2009
• Metallurgical analysis of circular EB weld samples, EDMS 1038264, Orbital welds, 2.11.2009
• Metrology report of central cell before joining of port tubes, EDMS 1038426, 21.10.2009
• Metallurgical analysis of EB welds for PIMS/Linac4, EDMS 1049991, Orbital welds, 12.11.2009
• Metallurgical analysis of EB welding tests for tuner and pick-up ports, EDMS 1054706, 9.12.2009
• Pictures of PIMS port weldings on CERN prototype
• metrology results of prototype
• mechanically measured weld shrinkage on prototype, 17.5.2010

Series preparation

Radiography of welding test of ports, done by FZJ (restricted access) EDMS 1146697

-- FrankGerigk - 02 Sep 2008