• Set CMSSW_FOR_UPCOMING = CMSSW_10_2_5
  • Set GITBRANCHTARGET = CMSSW_10_2_X
  • Set CMSSW_FOR_PLAYBACK = CMSSW_10_2_5
  • Set CMSSW_FOR_PROD = CMSSW_10_2_5

  • Set DQMGUI_FOR_TEST_AND_PLAYBACK = HG1809b
  • Set DQMGUI_FOR_PROD = HG1809b

  • Set PROD = icon:led-box-blue
  • Set OK = icon:led-box-green
  • Set NOTOK = icon:led-box-red
  • Set HANG = icon:led-box-gray


Online DQM CMSSW applications

DQMGithubGuide

Dropbox for new PRs on top of CMSSW_10_2_5 (or lower) for P5 (online DQM)


PROVIDE A PR BASED ON CMSSW_10_2_5 BRANCH TARGETED FOR CMSSW_10_2_X BRANCH and send a message to cms-dqm-coreTeam@cern.ch

  • remember NOT TO base your PR on any IB, instead use 'cmsrel CMSSW_10_2_5'
  • a thorough testing with YOUR local GUI before submitting is needed
  • a forward port with a PR to master is NEEDED if you want your changes to be included in future CMSSW releases
  • if your changes are meant to be only in Online DQM for brief period of data taking and hence not to be actually merged in CMSSW or forward ported, please close the PR once you have created it

PLEASE DO EDIT JUST BELOW THIS LINE

PLEASE_DO_ EDIT JUST ABOVE THIS LINE

PRs under test in the Online DQM Integration/Playback System (based on CMSSW_10_2_5)

DO NOT EDIT THIS SECTION OR ANYTHING BELOW

PRs running on top of CMSSW_10_2_5:

  • 2018/10/19 L1T: PR 24856 - Latest Emulator for the Kalman BMTF (on top of 10_2_5 - related to v2.7 of Kalman firmware).
  • 2018/10/04 BeamPixel: PR 24802 (manual) - Tested new configuration that works for HI runs.
  • 2018/10/03 L1T: PR 24793 - This PR fixes a SEGFAULT that might occur under specific circumstances after the merge of PR 24555.
  • 2018/10/01 Pixel: PR 24788 - Fix to bug which prevent to reset FPix Cluster Position maps of positive disk every 10LS in Online.
  • 2018/09/28 HCAL: PR 24758 - Makes the error condition for audio alarms for bad capid and LED misfires go away if the problem has been resolved for 60 LSes (~25 minutes).
  • 2018/09/24 L1T: PR 24643 - EMTF update CSC LCT coordinate conversion "PC LUTs" to use Global Tag 102X_dataRun2_Sep2018Rereco_v1
  • 2018/09/20 HCAL: PR 24607 - Adds a new task to the Hcal application for monitoring the FCD demonstrator.
  • 2018/09/20 L1T: PR 24602 - This is the latest available Kalman-BMTF Emulator to be used for the next short period at P5.
  • 2018/08/15 L1T: PR 24293 - OMTF emulator upgrades.

Formatting notes:

  • awaiting green-light from developer
  • green-light given, queued for production
  • in production

2018 HI Preparation

2018 HI PRs used during the September HI Test (based on CMSSW_10_2_5)

  • 2018/10/04 Pixel: PR 24788 - Fix to bug which prevent to reset FPix Cluster Position maps of positive disk every 10LS in Online.
  • 2018/09/18 BeamPixel: PR 24572 - Tested new configuration that works for HI runs.
  • 2018/09/14 Tracker: PR 24541 - SiStrip /Pixel online client setup for HI2018 workflow test (to 10_2_X)
  • 2018/09/14 GEM: PR 24526 - GEM online DQM client update for HI run
  • 2018/09/13 HCAL: PR 24532 - HI rawDataRepacker config changes
  • 2018/09/13 L1T: PR 24530 - Additional HI rawDataRepacker config changes
  • 2018/09/12 HCAL: PR 24516 - Overhaul HCAL LED monitoring; add quality test for bad capid rotation; adjust LEDTask/SignalRMS z-axis limits.
  • 2018/08/15 L1T: PR 24293 - OMTF emulator upgrades.

PRs needed for HI run on top of CMSSW_10_3_0

  • 2018/10/19 DQM: PR 24945 - online DQM GT update
  • 2018/10/12 L1T: PR 24934 - Latest Emulator for the Kalman BMTF (on top of 10_3_0_pre5 - Kalman v2.7 for HI Runs).
  • 2018/10/18 L1TEMU: PR 24909 - Changing default values of CaloLayer2 Agreement plots to be zero in the edge case where the histograms are not filled (requires PR 24868).
  • 2018/10/19 CSC: PR 24908 - Remove cscTriggerPrimitiveDigis to prevent online client from crashing.
  • 2018/10/17 RPC: PR 24907 - This PR is to add new folder to test new readouts in RPC DQM Online. /MODIFIES RPCTWINMUX MODULE NAME USED IN OTHER CLIENTS
  • 2018/10/16 EVENTDISPLAY: PR 24895 - HI scenario for event display
  • 2018/10/16 BEAMSPOT: PR 24888 - Updates for HI

PRs in use in the Online DQM Production System (based on CMSSW_10_2_5)

DO NOT EDIT THIS SECTION OR ANYTHING BELOW

PRs running on top of CMSSW_10_2_5:

  • 2018/10/19 L1T: PR 24856 - Latest Emulator for the Kalman BMTF (on top of 10_2_5 - related to v2.7 of Kalman firmware).
  • 2018/10/04 BeamPixel: PR 24802 (manual) - Tested new configuration that works for HI runs.
  • 2018/10/03 L1T: PR 24793 - This PR fixes a SEGFAULT that might occur under specific circumstances after the merge of PR 24555.
  • 2018/10/01 Pixel: PR 24788 - Fix to bug which prevent to reset FPix Cluster Position maps of positive disk every 10LS in Online.
  • 2018/09/28 HCAL: PR 24758 - Makes the error condition for audio alarms for bad capid and LED misfires go away if the problem has been resolved for 60 LSes (~25 minutes).
  • 2018/09/24 L1T: PR 24643 - EMTF update CSC LCT coordinate conversion "PC LUTs" to use Global Tag 102X_dataRun2_Sep2018Rereco_v1
  • 2018/09/20 HCAL: PR 24607 - Adds a new task to the Hcal application for monitoring the FCD demonstrator.
  • 2018/09/20 L1T: PR 24602 - This is the latest available Kalman-BMTF Emulator to be used for the next short period at P5.
  • 2018/08/15 L1T: PR 24293 - OMTF emulator upgrades.

Formatting notes:

  • in production
  • hanging PR (fully signed, not merged)

Online and Offline DQM GUI

This is for render plugins, layouts and workspaces. Please first read the instructions.

Dropbox for new PRs for the Online DQM GUI

Put your new PR here and send a message to cms-dqm-coreTeam@cernNOSPAMPLEASE.ch . List of open dmwm/deployment PRs is here.

PLEASE DO EDIT JUST BELOW THIS LINE

<!-- Please use the below example for each PR you submit - ( (!!!)leave 3 spaces(!!!) before the first * to get a correct list bullet) -->

<!-- Example * YYYYMMDD Subsystem: PR xxx - Description or title of the PR.-->

  • 2018/09/12 HCAL: PR 675 - Have the HCAL bad capid and LED misfire alarms go away after 60 LSes (desired if the problem is fixed without stop-starting the run).

PLEASE DO EDIT JUST ABOVE THIS LINE

PRs under test on the DQM Test GUI & Playback GUI (based on HG1809b and master branch)

DO NOT EDIT THIS SECTION OR ANYTHING BELOW

PRs used on the DQM GUI Production Systems (based on HG1809b and master branch)

  • 2018/09/12 HCAL: PR 675 - Have the HCAL bad capid and LED misfire alarms go away after 60 LSes (desired if the problem is fixed without stop-starting the run).

DO NOT EDIT THIS SECTION OR ANYTHING BELOW


%RESPONSIBLE% TomasHreus
-- AndriusKirilovas - 2018-10-23

Edit | Attach | Watch | Print version | History: r1 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r1 - 2018-10-23 - AndriusKirilovas
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    Sandbox All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright & 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback