HIG-EGM

Any Higgs analysis with electrons/photons has to fill both the table and the form below. Please contact Arnab Purohit (arnab.purohit@cernNOSPAMPLEASE.ch) once they are filled.

Useful material

Electron and photon performance references
Use the CMS muon performance at 7 TeV paper for Run I data
Use the CMS muon performance at 13 TeV paper for Run II data

Fill the table

The egamma contact of each analysis should fill the table below. Depending on the deviation in the electron or photon selection choice, the checks could require a talk at an EGM POG meeting.

• MOC status. To be filled by MOC. Status can be for analyses not yet reviewed, when the review is in progress, when we are waiting for additional feedback, and when the analysis is approved.
• CADI line. HIG-YY-NNN.
• Dataset. Indicate which dataset you are using.
• EGamma ID and ISO selection. Fill with all the details about your muon selection (together with the momentum and pseudorapidity acceptance). Whenever possible, try to refer to the common working points defined in SWGuideMuonIdRun2.
• EGamma triggers. List the muon triggers that you use for the analysis (including those for control sample definition).
• Supporting material. Include all the material needed to support your selection (it could be internal or external to the analysis). The aim of this column is to support the choice of the selection, and the methods used to compute the performances (scale factors, uncertainties). If the selection deviates from what is listed in SWGuideMuonIdRun2, the choice needs to be justified posting the material that shows the impact of the selection on the analysis (w.r.t. the nearest Muon POG working point), the performance plots obtained with standard tools (official T&P, MC Validation Suite and offline DQM) and the studies done on trigger which are muon based.
• Contact people. Contact people for Higgs analyses using electrons and photons.

MOC status	CADI line	Dataset	Muon ID and ISO selection	Muon triggers	Supporting material	Contact people
Jónatan	HIG-19-015 SM H→gg signal strengths & STXS	Full Run 2	ttH Leptonic: muon selection; pt> 5 GeV ; abs(eta)< 2.4; medium ID and loose PF isolation. VH Leptonic: muon selection; pt> 15 GeV ; abs(eta)< 2.4; tight ID and loose PF isolation.	Mu17_TrkIsoVVL_Mu8_TrkIsoVVL_DZ OR Mu17_TrkIsoVVL_TkMu8_TrkIsoVVL OR Mu17_TrkIsoVVL_Mu8_TrkIsoVVL_DZ OR Mu17_TrkIsoVVL_TkMu8_TrkIsoVVL_DZ (Muon triggers only used for deriving SFs)	AN-19-259	Rajdeep Chatterjee

Fill the form

The muon contacts of each analysis should make a copy of this form and fill it, following these steps:

1. Click on the form.
2. Scroll down and click on More topic actions.
3. Click on Copy this topic....
4. If, for example, your analysis is HIG-18-001, replace HIGYYNNNmuons by HIG18001muons.
5. Check the Allow non WikiWord box.
6. Click on Copy.