Tracker Monte Carlo Contact


cmsDriver

A small number of events should be tested on lxplus using cmsDriver.py before the request is sent for central production. With the --no_exec flag, this will create a python config file which can be ran using cmsRun <file.py>. Some instructions on using cmsDriver can be found here and example commands for requests are given in the sections below.

Instructions:

Get the correct version of CMSSW by doing : cmsrel CMSSW_X_Y_Z ....with the relevant version number.
To see what versions are available on the current architecture : scram list || CMSSW
To see what architecture is being used : echo $SCRAM_ARCH
You can change architecture by doing : export SCRAM_ARCH=slc6_amd64_gcc472 ...for example

Once you have the correct version of CMSSW, go to the src directory and type "cmsenv" to set the environmental variables.

You can create subdirectories for each set of requests. Enter the cmsDriver command and run on a small number of events to check for any error. If everything looks okay, the details of the request can be entered into MCM.

MCM

The Monte Carlo Request Manager is where requests are submitted for central production.

The PdmVMCM page gives some information and links, one of which is the glossary. There are some slides from a tutorial sessions here.

There are Monte Carlo Coordinations Meetings (currently at 3pm CET on Thursdays) where requests can be discussed and campaigns in MCM created.

Cosmics Request

- PEAK 3.8T : 10 mio ALCARECO (optimistic) + 10 mio ALCARECO (pessimistic)
- PEAK 0T : 5 mio ALCARECO (optimistic) + 5 mio ALCARECO (pessimistic)
- DECO 3.8T : 10 mio ALCARECO (optimistic) + 10 mio ALCARECO (pessimistic)
- DECO 0T : 5 mio ALCARECO (optimistic) + 5 mio ALCARECO (pessimistic)

With GEN-SIM in CMSSW_6_2_11 and DIGI-RECO in CMSSW_7_0_9_patch1.

Link to previous cosmics request in 5_2_X.

Cosmics GEN-SIM in CMSSW_6_2_11

The cosmics GEN-SIM campaign in 6_2_11 uses the UndergroundCosmicMu _cfi.py fragment and the global tag POSTLS162_V1::All. The geometry used is Extended2015.

There are two requests for magnetic field on and off:

  • Bon, 3.8T :
    • cmsDriver.py Configuration/GenProduction/python/TRK-Cosmic62-00001-fragment.py --fileout file:TRK-Cosmic62-00001.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM --conditions POSTLS162_V1::All --step GEN,SIM --scenario cosmics --geometry Extended2015
  • Boff, 0T (includes flag '--magField 0T' :
    • cmsDriver.py Configuration/GenProduction/python/TRK-Cosmic62-00002-fragment.py --fileout file:TRK-Cosmic62-00002.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM --conditions POSTLS162_V1::All --step GEN,SIM --magField 0T --scenario cosmics --geometry Extended2015

Instructions for testing on lxplus... Hide
  • Log on to lxplus
  • export SCRAM_ARCH=slc5_amd64_gcc472
    cmsrel CMSSW_6_2_11
    cd CMSSW_6_2_11/src
    cmsenv
  • Use the cmsDriver commands given above including the --no_exec flag
  • Check that the config file contains all the required settings
  • cmsRun <file.py>

Instructions for MCM... Hide

Access the campaigns using the "Campaign" button and select to view all. Click on the folder button to view the requests in the campaign.

Request Folder

Click on the spanner symbol in the request to edit it. This will bring up the details of the request. The Total Events should be entered. The Total Events does not need to be scaled up for the GEN-SIM efficiency as this will be taken into account by MCM. However, as in this case the ALCA step has an efficiency in the DIGI-RECO step, the number of requests must be scaled up.

Request button

The cmsDriver command should be added to the sequence tab by clicking the eye symbol. The UndergroundCosmicMu fragment should be added using the instructions found in the tutorial slides.

Then the requested can be tested by using the 'test command' in MCM.

Click on the test button and copy the command into a file on lxplus and 'source '. This should output the time per event which is to be entered into the MCM request page. The size per event should also be entered.

Cosmics DIGI-RECO in CMSSW_7_0_9_patch1

The DIGI-RECO campaign used CMSSW_7_0_9_patch1. There are 8 requests which use the two GEN-SIM MC in CMSSW_6_2_11. These include Bon/Boff, Peak/Deconvolution, Optimistic/Pessimistic(25ns/50ns). These requests must be broken up into two steps. The relevant global tags can be found here, with different versions for peak/deco and optimistic/pessimistic.

Bon - Deco - Pessimistic

Show cmsDriver command... Hide

Bon - Deco - Optimistic

Show cmsDriver command... Hide

Boff - Deco - Pessimistic

Show cmsDriver command... Hide
  • cmsDriver.py step1 --filein "dbs:/TKCosmics_0T/Cosmic62-POSTLS162_V1_Boff-v1/GEN-SIM" --fileout file:TRK-Cosmic70DR-00005_step1.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM-RAW --conditions COSM70_DEC_V1::All --step DIGI,L1,DIGI2RAW,HLT:2013,RAW2DIGI,L1Reco --magField 0T --scenario cosmics --geometry Extended2015

    cmsDriver.py step2 --filein file:TRK-Cosmic70DR-00005_step1.root --fileout file:TRK-Cosmic70DR-00005.root --mc --eventcontent ALCARECO --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier ALCARECO --conditions COSM70_DEC_V1::All --step RAW2DIGI,L1Reco,RECO,ALCA:TkAlCosmics0T --magField 0T --scenario cosmics --geometry Extended2015

Boff - Deco - Optimistic

Show cmsDriver command... Hide
  • cmsDriver.py step1 --filein "dbs:/TKCosmics_0T/Cosmic62-POSTLS162_V1_Boff-v1/GEN-SIM" --fileout file:TRK-Cosmic70DR-00006_step1.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM-RAW --conditions COSM70_DEC_V2::All --step DIGI,L1,DIGI2RAW,HLT:2013,RAW2DIGI,L1Reco --magField 0T --scenario cosmics --geometry Extended2015

    cmsDriver.py step2 --filein file:TRK-Cosmic70DR-00006_step1.root --fileout file:TRK-Cosmic70DR-00006.root --mc --eventcontent ALCARECO --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier ALCARECO --conditions COSM70_DEC_V2::All --step RAW2DIGI,L1Reco,RECO,ALCA:TkAlCosmics0T --magField 0T --scenario cosmics --geometry Extended2015

The Peak requests have an extra command: --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)"

Bon - Peak - Pessimistic

Show cmsDriver command... Hide
  • cmsDriver.py step1 --filein "dbs:/TKCosmics_38T/Cosmic62-POSTLS162_V1-v1/GEN-SIM" --fileout file:TRK-Cosmic70DR-00003_step1.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM-RAW --conditions COSM70_PEA_V1::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step DIGI,L1,DIGI2RAW,HLT:2013,RAW2DIGI,L1Reco --scenario cosmics --geometry Extended2015

    cmsDriver.py step2 --filein file:TRK-Cosmic70DR-00003_step1.root --fileout file:TRK-Cosmic70DR-00003.root --mc --eventcontent ALCARECO --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier ALCARECO --conditions COSM70_PEA_V1::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step RAW2DIGI,L1Reco,RECO,ALCA:TkAlCosmics0T --scenario cosmics --geometry Extended2015

Bon - Peak - Optimistic

Show cmsDriver command... Hide
  • cmsDriver.py step1 --filein "dbs:/TKCosmics_38T/Cosmic62-POSTLS162_V1-v1/GEN-SIM" --fileout file:TRK-Cosmic70DR-00004_step1.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM-RAW --conditions COSM70_PEA_V2::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step DIGI,L1,DIGI2RAW,HLT:2013,RAW2DIGI,L1Reco --scenario cosmics --geometry Extended2015

    cmsDriver.py step2 --filein file:TRK-Cosmic70DR-00004_step1.root --fileout file:TRK-Cosmic70DR-00004.root --mc --eventcontent ALCARECO --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier ALCARECO --conditions COSM70_PEA_V2::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step RAW2DIGI,L1Reco,RECO,ALCA:TkAlCosmics0T --scenario cosmics --geometry Extended2015

Boff - Peak - Pessimistic

Show cmsDriver command... Hide
  • cmsDriver.py step1 --filein "dbs:/TKCosmics_0T/Cosmic62-POSTLS162_V1_Boff-v1/GEN-SIM" --fileout file:TRK-Cosmic70DR-00007_step1.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM-RAW --conditions COSM70_PEA_V1::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step DIGI,L1,DIGI2RAW,HLT:2013,RAW2DIGI,L1Reco --magField 0T --scenario cosmics --geometry Extended2015

    cmsDriver.py step2 --filein file:TRK-Cosmic70DR-00007_step1.root --fileout file:TRK-Cosmic70DR-00007.root --mc --eventcontent ALCARECO --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier ALCARECO --conditions COSM70_PEA_V1::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step RAW2DIGI,L1Reco,RECO,ALCA:TkAlCosmics0T --magField 0T --scenario cosmics --geometry Extended2015

Boff - Peak - Optimistic

Show cmsDriver command... Hide
  • cmsDriver.py step1 --filein "dbs:/TKCosmics_0T/Cosmic62-POSTLS162_V1_Boff-v1/GEN-SIM" --fileout file:TRK-Cosmic70DR-00008_step1.root --mc --eventcontent RAWSIM --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier GEN-SIM-RAW --conditions COSM70_PEA_V2::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step DIGI,L1,DIGI2RAW,HLT:2013,RAW2DIGI,L1Reco --magField 0T --scenario cosmics --geometry Extended2015

    cmsDriver.py step2 --filein file:TRK-Cosmic70DR-00008_step1.root --fileout file:TRK-Cosmic70DR-00008.root --mc --eventcontent ALCARECO --customise SLHCUpgradeSimulations /Configuration/postLS1Customs.customisePostLS1 --datatier ALCARECO --conditions COSM70_PEA_V2::All --customise_commands "process.mix.digitizers.strip.APVpeakmode=cms.bool(True)" --step RAW2DIGI,L1Reco,RECO,ALCA:TkAlCosmics0T --magField 0T --scenario cosmics --geometry Extended2015

PHYS14 AlCaReco requests

Phys14 AlCaReco requests can be found here.

The ALCA:TkAlMinBias have a dedicated flow. There are requests for JME-Fall13-00001, BTV-Fall13-00041 -> 00053, JME-Fall13-00009 -> 00011.


The remaining requests were edited to include the ALCA step, where step1 is kept if Raw = Y. ALCARECO is added to eventcontent & datatier. RECO step is included is RECO = Y, in which case RECO, ALCARECO should be added to eventcontent and datatier. The relevant step is added for ALCA, eg.ALCA:TkAlMuonIsolated, where each step is given beside the request.

List of requests... Hide

(1) TSG-Fall13-00002

ALCA:TkAlMuonIsolated, keep Raw/Reco=Y/N

(2) MUO-Fall13-00013

ALCA:TkAlZMuMu, keep Raw/Reco=Y/Y

(3) TSG-Fall13-00022

ALCA:TkAlZMuMu keep Raw/Reco=N/N

(4) BPH-Fall13-00004

ALCA:TkAlJpsiMuMu keep Raw/Reco=Y/N

(5) BPH-Fall13-00003

ALCA:TkAlJpsiMuMu keep Raw/Reco=Y/Y

(6) FSQ-Fall13-00024

ALCA:TkAlZMuMu keep Raw/Reco=Y/Y

(7) SMP-Fall13-00011

ALCA:TkAlMuonIsolated keepRaw/Reco=N/N

-- LanaBeck - 2014-11-13

Attachments Attachments
Topic attachments
I Attachment History Action Size DateSorted ascending Who Comment
PNGpng Cosmic62Folder.png r1 manage 21.2 K 2014-11-18 - 16:11 LanaBeck  
PNGpng Screen_Shot_2014-11-18_at_12.59.15.png r1 manage 86.4 K 2014-11-18 - 16:04 LanaBeck  
PNGpng cosmictest.png r1 manage 14.4 K 2014-11-18 - 19:56 LanaBeck  
PNGpng Cosmic62Requests.png r2 r1 manage 36.0 K 2015-01-14 - 18:52 LanaBeck  
Edit | Attach | Watch | Print version | History: r14 < r13 < r12 < r11 < r10 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r14 - 2015-01-14 - LanaBeck
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    Sandbox All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright &© 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback